Instrukcja obsługi Pioneer CA-BC-DAI.001

Pioneer Niesklasyfikowane CA-BC-DAI.001

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pioneer CA-BC-DAI.001 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Image Sensor: 1/3” CCD
Resolution: NTSC 510 x 492, PAL 500 x 582
TV Lines: 580
Lens: 1.7mm
Minimum Illumination: 0 Lux (LED’s on)
Infra-Red LED’s: Yes
Night Vision Distance: 35ft
Waterproof Rating: IP68
Viewing Angle: 170 Degrees
Image: Mirror
Operating Voltage: 12V DC (Negative Ground)
Current Consumption: 77-125mA @ 13.8V
Operating Temperature: -20 Degrees C to +70 Degrees C
U s e r M a n u a l
Prior to Installation
Read the manual prior to installation. Technical knowledge is necessary for installation.
Please ensure you use the correct tools to avoid damage to the vehicle or product.
Connects2 can not be held responsible for the installation of this product.
Technical Support
Connects2 want to provide a fast and suitable resolution should you encounter any tech-
nical issues. With this in mind, when contacting Connects2, try to provide as much Infor-
mation as possible. This will speed up the process and help us to help you.
Please use our dedicated online technical support centre: support.connects2.com
Iveco Reverse Camera
Iveco Daily 2014>
PRODUCT FEATURES:
DISCLAIMER:
CAM-IV2
www.connects2.com
2
Connects2Vision
CONTENTS
- Camera with 70cm cable to Male 4pin camera connector
- 10m 4pin to 4pin extension cable
- Camera connection cable with Female 4pin camera connector, 2x RCA Female
connectors and Female DC connector
- 1.45 DC power cable with Male DC connector
- Male to Male RCA splice
- Instructions
INSTALLATION
1. Remove the third brake light housing from the vehicle and remove the brake light
assembly and courtesy lamp.
2. Attach the brake light assembly and courtesy lamp to the CAM-IV2 and ret to
the vehicle taking care not to trap any cables.
3. Connect the Black wire to a suitable ground and connect the Red wire to the
reversing light circuit or an interface which provides a reverse signal.
4. Connect the camera to the 4pin extension cable, connect the extension cable
to the camera connection cable and connect the camera connection cable to
the display screen via the Yellow RCA connector and supplied RCA splice and en-
sure that the image is displayed correctly.
Subscribe to our YouTube Channel for installation
guides and tips... www.youtube.com/connects2

Specyfikacje produktu

Marka: Pioneer
Kategoria: Niesklasyfikowane
Model: CA-BC-DAI.001

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pioneer CA-BC-DAI.001, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Pioneer

Pioneer

Pioneer BDR-212V Instrukcja

9 Października 2024
Pioneer

Pioneer CA-HM-SST.001 Instrukcja

9 Października 2024
Pioneer

Pioneer CA-R-FIA.002 Instrukcja

9 Października 2024
Pioneer

Pioneer CA-R-CG.003 Instrukcja

9 Października 2024
Pioneer

Pioneer CA-R-NI.005AE Instrukcja

9 Października 2024
Pioneer

Pioneer CA-HM-SUZ.007 Instrukcja

9 Października 2024
Pioneer

Pioneer CA-HM-HO.003 Instrukcja

9 Października 2024
Pioneer

Pioneer CA-R-PI.017 Instrukcja

9 Października 2024
Pioneer

Pioneer CD-HW-MIT.003 Instrukcja

9 Października 2024
Pioneer

Pioneer CD-HW-MIT.002 Instrukcja

9 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024