Instrukcja obsługi Phoenix Gold ZT6004

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Phoenix Gold ZT6004 (12 stron) w kategorii Receiver. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
© 2021 Phoenix Gold • www.phoenixgold-eu.com
POWERFUL 24VOLT CLASS D AMPLIFIERS
SUITABLE FOR 24VOLT SYSTEMS
Model: ZT6004 / ZT15001
- powers on the amp when audio signal is suppliedHigh Level Auto-Turn On
- compatible with aftermarket/original source unitsOEM Connection Ready
• Integrated Fan - regulates temp. for sustained performance (ZT15001 only)
- control bass level with included ZRBC Remote Bass Ready (ZT15001 only)
- versatile connectivity to suit any vehicleHigh & Low Level Inputs
- enables maximum current supplyHeavy Duty Connector Block
- protection against thermal damage, 4-Way Protected Circuit
reversed power, speaker polarity and low voltage
SPECIFICATIONS
All specications subject to change without notice.
ZT
24VOLT
© 2021 Phoenix Gold | A Brand of AAMP Global
www.phoenixgold-eu.com
ZT6004 / ZT15001 - ZT-Series Ampliers
ZT6004 ZT15001
Class Class D Class D
Frequency
Response 20Hz-20KHz 20Hz-400Hz
Dims (LxWxH(mm)) 253 x 160 x 48 333 x160 x 48
RMS Power
Ratings
175W x 4 @ 2ohm
100W x 4 @ 4ohm
350W x 2 @ 4ohm bridged
1600W x 1 @ 1ohm
1150W x 1 @ 2ohm
650W x 1 @ 4ohm
Signal to
Noise Ratio >96dB >96dB
High & Low Pass
Crossover 12dB per Octave 24dB per Octave
Subsonic Filter N/A 12dB per Octave
Crossover
Range 50Hz-250Hz 50Hz-400Hz
Subsonic
Crossover Range N/A 10Hz-55Hz
Bass Boost
@ 45Hz N/A 0 to +18dB
High & Low Level
Input Range 0.2Volts to 10Volts 0.2Volts to 10Volts
Minimum Load
Impedance
2ohm Stereo &
4ohm bridged 1ohm
Note:
Phoenix Gold Ampliers have a minimum load impedance
of 2ohm per channel 4ohm bridged (& 1ohm for monoblocks)
© 2021 Phoenix Gold • www.phoenixgold-eu.com
ZT6004 / ZT15001 - ZT-Series Ampliers
Installation Warnings
1. Ensure the +24V lead is disconnected from the battery before you
connect any new equipment
2. Ensure that the amplier mounting location and holes will not interfere
with the petrol tank, brake lines or electrical wiring.
3. Ensure the amplier is securely fastened to the vehicle to prevent the
amplier moving and causing damage in the event of an accident
4. Ensure all wiring is protected from sharp objects and from pinching or
crushing which could result in damage to the audio system
5. Ensure the mounting location has sufcient air ow around the
amplier. If the amplier is mounted in an enclosed space a 3” fan
with ducting should be used to assist with cooling.
6. Do not mount any amplier on a subwoofer enclosure as extended
exposure to vibration may cause damage to the amplier.
7. Ensure the minimum recommended gauge wire/cable or larger for all
amplier connections
8. Appropriate mounting is very important for prolonged life
expectancy of any amplier. Select a location that provides
protection from moisture. Keep in mind that an amplier should never
be mounted upside down. Upside down mounting will compromise
heat dissipation through the heat sink and could engage the thermal
protection circuit.

Specyfikacje produktu

Marka: Phoenix Gold
Kategoria: Receiver
Model: ZT6004

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Phoenix Gold ZT6004, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Receiver Phoenix Gold

Phoenix Gold

Phoenix Gold ZQ15001 Instrukcja

4 Października 2024
Phoenix Gold

Phoenix Gold ZQA6.8 Instrukcja

4 Października 2024
Phoenix Gold

Phoenix Gold ZT6004 Instrukcja

4 Października 2024
Phoenix Gold

Phoenix Gold ZQ5004 Instrukcja

4 Października 2024
Phoenix Gold

Phoenix Gold Z300.4 Instrukcja

3 Października 2024
Phoenix Gold

Phoenix Gold SX2 1200.1 Instrukcja

3 Października 2024
Phoenix Gold

Phoenix Gold SX1200.5 Instrukcja

3 Października 2024
Phoenix Gold

Phoenix Gold RX2400.4 Instrukcja

3 Października 2024
Phoenix Gold

Phoenix Gold SX2 1200.6 Instrukcja

3 Października 2024
Phoenix Gold

Phoenix Gold SX400.1 Instrukcja

3 Października 2024

Instrukcje Receiver

Najnowsze instrukcje dla Receiver

Audison

Audison SR5.600 Instrukcja

4 Października 2024
Audison

Audison LRx 2.250 Instrukcja

4 Października 2024
AVM

AVM AS 30.3 Instrukcja

4 Października 2024
Naim

Naim Uniti Nova PE Instrukcja

4 Października 2024
Audison

Audison Prima AP4.9 bit Instrukcja

4 Października 2024
Hifonics

Hifonics HCM-1500.1D Instrukcja

4 Października 2024
Edwards Signaling

Edwards Signaling 5532M Instrukcja

4 Października 2024
Clare Controls

Clare Controls amp.1640 Instrukcja

4 Października 2024
August

August WR320 Instrukcja

3 Października 2024
August

August MR280 Instrukcja

3 Października 2024