Instrukcja obsługi Phoenix Gold RX21000.1
Phoenix Gold
Receiver
RX21000.1
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Phoenix Gold RX21000.1 (14 stron) w kategorii Receiver. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/14
© 2018 Phoenix Gold • www.phoenixgold.com
Amplifier Owner’s Manual
Models: RX2 1000.1 ● RX2 500.1 ● RX2 250.1
Amplifier
Manual
The RX2-series ampliers are the next evolution of the
reliable and great sounding RX series. With a new, more
efcient circuit design, we have increased power output
while decreasing chassis size. These ampliers will be the
reference for style and value in any installation. Built with
the legendary Phoenix Gold reliability, they feature heavy
duty heatsinks, robust unregulated power supplies, and
oversized direct input power and speaker terminals. They
also sound sweet thanks to the audiophile grade output
transistors. We made upgrading your stock system easy by
allowing high level inputs so you can keep the OEM radio,
and still upgrade the sound. RX2-series ampliers are ready
to impress with their effortless ability to provide power and
clarity while keeping the chassis at a convenient size for
any installation. The devil is in the details, so it just made
sense that we allow the PG name plate to be removed and
turned to match the orientation you might need for your
install because we know your going to want show off your
system and make all you’re friends jealous.
• Class-D Topology RX2 1000.1 / RX2 500.1
• Class-A/B Topology RX2 250.1
• Small Footprint Chassis Design
• Robust Unregulated Power Supplies
• Rotatable Name Badge for Installation Flexibility
• High Level Inputs for Easy OEM Integration
• Remote Bass Controller Included
• Audio Precision® Quality Control Verication
Features
Amplifier Owner’s Manual
© 2018 Phoenix Gold • www.phoenixgold.com
SPECIFICATIONS
IMPORTANT: A power birth certicate is included for each amplier. RX2 ampliers are conservatively rated and will exceed their RMS power rating shown
here. All RMS power ratings and measurements are at 14.4 volts with no more than 1% THD.
SPECIFICATIONS
RX2 1000.1 SPECIFICATIONS
RMS Power Ratings listed at less than 1% THD @ 14.4v
Number of Channels: 1
1Ω: 1000W
2Ω: 700W p2-x1
4Ω: 400W x 1
Bridgeable: N/A
Crossover Mode: LP
CH 1: 40Hz - 200Hz @ 12dB / Oct Linkwitz Riley
Subsonic : 10Hz - 40Hz @ 12dB / Oct Linkwitz Riley
Input Channels: 2CH L/R
Input Mode: Unbalanced / Balanced
Input SensItivity: .2v - 5v Unbalanced Low-Level RCA
.2v - 5v Unbalanced Low-Level RCA
Processing: Bass Boost 0dB / +6dB / +12dB @45hz
Signal to Noise (@ CEA Standard): >70dB
Frequency Response: 15Hz- 250Hz
Topology Class: D
Heatsink Type: Extruded Aluminum
Bass EQ: 0dB, +6dB +12dB
Subsonic Crossover Range: 10Hz to 55Hz @12dB
Cooling Type: Radiation
Operating Voltage: 8V to 16V
Power Supply Type: Unregulated with OTM
Onboard Thermal Management
Power Terminal: 4 Gauge
Speaker Terminal: 10 Gauge
Recommended Fusing: 3 x 35A ATC
Dimensions (L x W x H): 11.81” x 8.11” x 1.98”
RX2 500.1 SPECIFICATIONS
RMS Power Ratings listed at less than 1% THD @ 14.4v
Number of Channels: 1
2Ω: 500W x 1
4Ω: 350 p2-x1
Total RMS Power (Sum of rated power): 500W
Bridgeable: N/A
Crossover Mode: LP
CH 1 40Hz - 200Hz @ 12dB / Oct Linkwitz Riley
Subsonic: 10Hz - 40Hz @ 12dB / Oct Linkwitz Riley
Input Channels: 2CH L/R
Input Mode: Unbalanced / Balanced
Input Sensativity: .2v - 5v Unbalanced Low-Level RCA
.2v - 5v Unbalanced Low-Level RCA
Processing: Bass Boost 0dB / +6dB / +12dB @45hz
Input Selection: 200mV-6v
Signal to Noise (@ CEA Standard): >80dB
Frequency Response: CH1 15Hz - 250Hz
Topology Class: D
Heatsink Type: Extruded Aluminum
Bass EQ: 0dB, +6dB +12dB
Subsonic Crossover Range: 10Hz to 55Hz @12dB
Cooling Type: Radiation
Operating Voltage: 8V to 16V
Power Supply Type: Unregulated with OTM
Onboard Thermal Management
Power Terminal: 4 Gauge
Speaker Terminal: 10 Gauge
Recommended Inline Fusing: 40A
Onboard Fusing: 2 x 25A ATC
Dimensions (L x W x H): 8.66” x 8.11” x 1.98”
8.66in /220.00 mm
8.11in /206.00 mm
8.11in /206.00 mm
1.98in/50. 5 mm
11.81i n /300.00 mm
8.11in / 206.00 mm
8.11in / 206.0 0 mm
1.98in/50. 5 mm
Amplifier Owner’s Manual
© 2018 Phoenix Gold • www.phoenixgold.com
REMOTE LEVEL CONTROL
This port is for connecting the remote subwoofer level
control. This allows up to 20dB of volume adjustment.
This is not a bass boost, it controls the level of the low
pass signal.
BASS EQ
Selectable EQ with boost adjustment to 0dB, 6dB or
12dB.
LPF LOW PASS FILTER
Controls the lowpass crossover point. Continuously
variable from 40Hz to 200Hz.
LOW INPUT
Connect preamp signal cables from the head unit or
signal processor to these terminals.
SPEAKER OUTPUTS
Used to connect the amplier to speakers. RX2 250.1’s
and RX2 500.1’s minimum impedance is 2 ohms.
RX2 1000.1’s minimum impedance is 1 ohm.
POWER/PROTECT LED
Amplier status indicator. Blue indicates all systems
working and amplier is on. Red indicates protection
mode, from Thermal, Short Circuit or Blown Fuse. (See
Troubleshooting)
FUSE
On-Board fuse protection via ATC fuses. If blown, only
replace with same value fuses or risk damage to unit
and voiding the warranty.
SUBSONIC
Controls the subsonic highpass lter crossover point.
Continuously variable from 10Hz to 40Hz to remove low
frequencies to increase system efciency, output and speaker
protection.
GAIN
Used to reach maximum amplier power with a wide variety of
input signal sources and levels.
HIGH INPUT
Used when utilizing a source unit that has high level output
and no RCA level signal connections such as an OEM factory
source unit or aftermarket head unit.
BATT+
This must be connected to the fused positive terminal (+12V)
of the car’s battery. A fuse must be located within 18 inches of
the battery to protect the vehicle and should be fused at, or
below, the ampliers onboard fuse rating.
REMOTE
This must be connected to switched +12V, usually a trigger
wire coming from the head unit or an ignition lead if one is not
available.
GROUND
This must be connected to the negative terminal of the car’s
battery or bolted to a clean, unpainted part of the chassis of
the vehicle, use of an Stinger Expert Ground Terminal (SPTE) is
recommended.
RX2 1000.1 - RX2 500.1 - RX2 250.1
MONOBLOCK POWER AMPLIFIERS
Specyfikacje produktu
Marka: | Phoenix Gold |
Kategoria: | Receiver |
Model: | RX21000.1 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Phoenix Gold RX21000.1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Receiver Phoenix Gold
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
Instrukcje Receiver
- Receiver Sony
- Receiver Yamaha
- Receiver Motorola
- Receiver Logitech
- Receiver Sharp
- Receiver Pioneer
- Receiver SilverCrest
- Receiver Technics
- Receiver JBL
- Receiver Onkyo
- Receiver Edision
- Receiver Roland
- Receiver Bose
- Receiver StarTech.com
- Receiver Behringer
- Receiver Nedis
- Receiver Tangent
- Receiver Boss
- Receiver Marquant
- Receiver Jensen
- Receiver August
- Receiver Garmin
- Receiver Blaupunkt
- Receiver ATen
- Receiver Teac
- Receiver Dual
- Receiver S.M.S.L
- Receiver Line 6
- Receiver DAP-Audio
- Receiver Manhattan
- Receiver Strong
- Receiver Tripp Lite
- Receiver Shure
- Receiver Denon
- Receiver Mercury
- Receiver Audac
- Receiver Cambridge
- Receiver Kenwood
- Receiver Scosche
- Receiver Alpine
- Receiver Ibanez
- Receiver Chamberlain
- Receiver Bang & Olufsen
- Receiver JVC
- Receiver Focusrite
- Receiver Rega
- Receiver Hilti
- Receiver TechniSat
- Receiver LD Systems
- Receiver Krüger&Matz
- Receiver Marshall
- Receiver Audiotec Fischer
- Receiver Clarion
- Receiver Thomson
- Receiver Pro-Ject
- Receiver Velleman
- Receiver Ferguson
- Receiver Fusion
- Receiver Magnat
- Receiver Delta Dore
- Receiver Pyle
- Receiver ELAC
- Receiver Panduit
- Receiver Marantz
- Receiver Sennheiser
- Receiver Esoteric
- Receiver Chord
- Receiver Speco Technologies
- Receiver Bowers & Wilkins
- Receiver Samson
- Receiver PreSonus
- Receiver Monitor Audio
- Receiver Audio Pro
- Receiver Blackstar
- Receiver Fosi Audio
- Receiver Vonyx
- Receiver Musical Fidelity
- Receiver Bogen
- Receiver Alto
- Receiver Naim
- Receiver Peavey
- Receiver ART
- Receiver NAD
- Receiver RCF
- Receiver Harman Kardon
- Receiver Rolls
- Receiver Aiwa
- Receiver JL Audio
- Receiver AKAI
- Receiver ICOM
- Receiver Hartke
- Receiver Telefunken
- Receiver Optoma
- Receiver Proel
- Receiver Hifonics
- Receiver Focal
- Receiver DBX
- Receiver Kicker
- Receiver Amazon
- Receiver Thorens
- Receiver Omnitronic
- Receiver Hama
- Receiver Mackie
- Receiver FiiO
- Receiver Lindell Audio
- Receiver MXL
- Receiver Reely
- Receiver Saramonic
- Receiver Kemo
- Receiver Sangean
- Receiver VOX
- Receiver Hager
- Receiver Arcam
- Receiver Mac Audio
- Receiver Infinity
- Receiver McIntosh
- Receiver Advance Acoustic
- Receiver Denver
- Receiver Dynacord
- Receiver Marshall Electronics
- Receiver Fender
- Receiver Hertz
- Receiver Inter-M
- Receiver Mooer
- Receiver AKG
- Receiver Atlas Sound
- Receiver IOTAVX
- Receiver Gefen
- Receiver Vivanco
- Receiver Fishman
- Receiver Lectrosonics
- Receiver Sencor
- Receiver Ground Zero
- Receiver Stinger
- Receiver Power Dynamics
- Receiver Alecto
- Receiver Kathrein
- Receiver Canton
- Receiver JUNG
- Receiver TOA
- Receiver Monacor
- Receiver HQ Power
- Receiver Electro-Voice
- Receiver Anthem
- Receiver Audizio
- Receiver Tascam
- Receiver RME
- Receiver AudioControl
- Receiver Audiolab
- Receiver Vocopro
- Receiver SPL
- Receiver Fontastic
- Receiver Crunch
- Receiver Fenton
- Receiver Artsound
- Receiver Kramer
- Receiver Ram Audio
- Receiver Rotel
- Receiver Ampeg
- Receiver Amplicom
- Receiver IFi Audio
- Receiver Amiko
- Receiver Caliber
- Receiver Sagem
- Receiver Summit Audio
- Receiver Musway
- Receiver Brigmton
- Receiver Sunstech
- Receiver Avalon
- Receiver Steren
- Receiver Galaxy Audio
- Receiver Denson
- Receiver Renegade
- Receiver Pyle Pro
- Receiver Roksan
- Receiver MB Quart
- Receiver Sherwood
- Receiver Konig
- Receiver Conrad
- Receiver RDL
- Receiver Fredenstein
- Receiver Metronic
- Receiver QSC
- Receiver Lanzar
- Receiver Humax
- Receiver Golden Age Project
- Receiver Apart
- Receiver Pinnacle
- Receiver Homecast
- Receiver Engel Axil
- Receiver Skytec
- Receiver JETI
- Receiver Linn
- Receiver Monoprice
- Receiver Yorkville
- Receiver Exposure
- Receiver Axton
- Receiver MIPRO
- Receiver OSD Audio
- Receiver Mark Levinson
- Receiver Black Lion Audio
- Receiver Adastra
- Receiver PSB
- Receiver Citronic
- Receiver Formuler
- Receiver Warm Audio
- Receiver HUMANTECHNIK
- Receiver Crest Audio
- Receiver Grace Design
- Receiver Xantech
- Receiver Wet Sounds
- Receiver Manley
- Receiver Ebode
- Receiver Crown
- Receiver Morel
- Receiver CE Labs
- Receiver Jolida
- Receiver Viscount
- Receiver Ashdown Engineering
- Receiver Synq
- Receiver Mtx Audio
- Receiver Aquatic AV
- Receiver Parasound
- Receiver Skytronic
- Receiver CYP
- Receiver Topp Pro
- Receiver IMG Stage Line
- Receiver Wireless Solution
- Receiver Comtek
- Receiver Pyramid
- Receiver LEA
- Receiver FiveO
- Receiver SureCall
- Receiver Phonic
- Receiver AER
- Receiver Dynavox
- Receiver Modelcraft
- Receiver Bugera
- Receiver CyberData Systems
- Receiver Stewart
- Receiver Meridian
- Receiver Sinus Live
- Receiver Soundtrack
- Receiver Canor
- Receiver Unison Research
Najnowsze instrukcje dla Receiver
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024