Instrukcja obsługi Philips Series 1000 MVL1098
Philips
Baardtrimmer
Series 1000 MVL1098
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Philips Series 1000 MVL1098 (8 stron) w kategorii Baardtrimmer. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
MVL1098
© 2019 Koninklijke Philips N.V.
All rights reserved
保留所有权利
4222.002.9182.1 (6/3/2019)
> 75% 循环再造纸
保留备用
2
3
1
2
4
5
6
7
1
2
8
2
1
9
10
11
12
13
14
15
16
1
2
17
>75% recycled paper
>75% papier recyclé
English
Introduction
Congratulations on your purchase and welcome to
Philips! To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.
Your new Philips kid hair clipper allows you to give
your child a professional haircut in the comfort of
your own home. The ultra-silent motor and child-
safe, lightweight and waterproof design makes
cutting hair a pain-free, easy experience for you
and your child. The professional blade with the
specially designed rounded tips combined with
multiple-length combs, helps you to safely create a
smooth, even cut, every time.
General description (Fig. 1)
1 Cutting unit
2 On/off slide
3 Charging indicator
4 Socket for small plug
5 Ear contouring comb (1 mm/1-9 mm)
6 Hair comb (3 mm/6 mm)
7 Hair comb (9 mm/12 mm)
8 Supply unit
9 Small plug
10 Bottle of sewing machine oil
11 Cleaning brush
Important safety information
Read this important information carefully before
you use the appliance and its accessories and save
it for future reference. The accessories supplied
may vary for different products.
Danger
- Keep the supply unit dry (Fig. 2).
Warning
- To charge the battery, only use the detachable
supply unit (type HQ8507) provided with the
appliance.
- The supply unit contains a transformer. Do not
cut off the supply unit to replace it with another
plug, as this causes a hazardous situation.
- This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved. Children
shall not play with the appliance. Cleaning and
user maintenance shall not be made by
children without supervision.
- Detach the hand-held part from the supply
cord before cleaning it in water.
- Always check the appliance before you use it.
Do not use the appliance if it is damaged, as
this may cause injury. Always replace a
damaged part with one of the original type.
- This appliance contains batteries that are non-
replaceable.
- Do not open the appliance to replace the
rechargeable battery.
Caution
- Never immerse the appliance in water. Do not
use the appliance in the bath or shower.
- Never use water hotter than 60°C to rinse the
appliance.
- Only use this appliance for its intended purpose
as shown in the user manual.
- If you use the appliance to clip the hair of more
than one child, clean the appliance before you
use it on another child.
- Never use compressed air, scouring pads,
abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the
appliance.
- Do not use the supply unit in or near wall
sockets that contain an electric air freshener to
prevent irreparable damage to the supply unit.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
General
- This appliance can be safely cleaned under the
tap (Fig. 3).
1
56
7
10
8
2
3
4
9
11
1
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Preparing for use
Charging
Charge the appliance for at least 8 hours before
you use it for the first time, after a long period of
non-use or when the motor starts to run more
slowly during hair clipping.
When the appliance is fully charged, the appliance
has a cordless operating time of up to 45 minutes.
Note: Do not leave the appliance connected to the
wall socket for more than 24 hours
1 Switch off the appliance.
2 Insert the small plug into the appliance and put
the supply unit in the wall socket (Fig. 4).
- After a few seconds, the charging indicator
lights up green continuously to indicate that the
appliance is charging (Fig. 5).
3 After charging (approx. 8 hours), remove the
supply unit from the wall socket and pull the
small plug out of the appliance.
Charge indications
Battery low
The battery status is indicated by the performance
of the appliance. When the appliance starts
working more slowly, the battery is almost empty
and needs to be charged for optimal performance.
Charging
When you charge the appliance, the charging
indicator lights up green continuously to indicate
that the appliance is charging (Fig. 5).
Using the appliance
Note: This appliance can be used without cord or
when it is connected to the wall socket (Fig. 6).
Switching the appliance on and off
- To switch on the appliance, push the on/off
slide upwards (Fig. 7).
- To switch off the appliance, push the on/off
slide downwards.
Removing or attaching combs
1 To remove the comb, push one lug backwards
off the appliance until the comb detaches from
the appliance (Fig. 8).
2 To attach the comb, make sure the side with
the desired hair length points upwards. Fit one
of the projections on the inside of the lug into
the small hole on the side of the appliance.
Push the other lug of the comb into place
('click') (Fig. 9).
Note: Please make sure that the lugs of the
comb have been properly inserted into the
holes on both sides of the appliance.
Before use
- For optimal safety, we advise you to always use
the appliance with a comb.
- This appliance is only intended for clipping
human scalp hair. Do not use it for another
purpose.
- When you clip hair for the first time, start with
the comb with the highest length to familiarize
yourself with the appliance.
- Make sure the hair is clean and dry. Do not use
the appliance on wet hair.
- Make sure the head of the person whose hair
you are cutting is at the same level as your
chest. This ensures that all parts of the head are
clearly visible and within easy reach.
Hair clipping with comb
The appliance comes with different hair combs.
Each side of each comb cuts to a different fixed
hair length. The indication on the inside of each
comb corresponds to the remaining hair length
after clipping.
Ear contouring comb 1 mm/1-9 mm
Hair comb 3 mm/6 mm
Hair comb 9 mm/12 mm
1 Comb the hair in the direction of hair growth.
2 Attach the desired comb onto the appliance
(see 'Removing or attaching combs').
3 To clip the hair, move the appliance through the
hair slowly. Make sure that the flat part of the
comb is in full contact with the scalp to obtain
an even cutting result (Fig. 10).
Hair clipping tips
- To clip most effectively, move the appliance
against the hair growth direction.
- Move the appliance in different directions
(upward, downward or across), because hair
doesn't all grow in the same direction.
- Make overlapping passes over the head to
ensure that the appliance catches all the hairs
that need to be cut.
- Write down which comb(s) you use to create a
certain hairstyle as a reminder for future
clipping sessions.
- Regularly remove cut hair from the comb. If a lot
of hair has accumulated in the comb, remove it
from the appliance and blow and/or shake out
the hairs (see 'Cleaning').
Cleaning
Never dry the cutting unit with a towel or tissue,
as this may damage the trimming teeth.
Clean the appliance every time you have used it.
Only clean the appliance with the cleaning brush
supplied.
Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as alcohol, petrol or
acetone to clean the appliance.
1 Switch off the appliance and disconnect it from
the wall socket.
2 Wipe the housing of the appliance with a dry
cloth (Fig. 11).
Specyfikacje produktu
| Marka: | Philips |
| Kategoria: | Baardtrimmer |
| Model: | Series 1000 MVL1098 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Philips Series 1000 MVL1098, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Baardtrimmer Philips
3 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
26 Września 2024
26 Września 2024
8 Sierpnia 2024
5 Lipca 2024
4 Lipca 2024
4 Lipca 2024
Instrukcje Baardtrimmer
- Baardtrimmer Braun
- Baardtrimmer SilverCrest
- Baardtrimmer Panasonic
- Baardtrimmer BaByliss
- Baardtrimmer Conair
- Baardtrimmer Taurus
- Baardtrimmer Grundig
- Baardtrimmer Remington
- Baardtrimmer Hyundai
- Baardtrimmer Rowenta
- Baardtrimmer Unold
- Baardtrimmer Zelmer
- Baardtrimmer Teesa
- Baardtrimmer Emerio
- Baardtrimmer Fagor
- Baardtrimmer Wahl
- Baardtrimmer Eta
- Baardtrimmer Scarlett
- Baardtrimmer TriStar
- Baardtrimmer DCG
- Baardtrimmer G3 Ferrari
- Baardtrimmer Ferrari
- Baardtrimmer Princess
- Baardtrimmer Innoliving
- Baardtrimmer Solac
- Baardtrimmer GA.MA
- Baardtrimmer Moser
- Baardtrimmer Sencor
- Baardtrimmer ProfiCare
- Baardtrimmer Vitek
- Baardtrimmer Sinbo
- Baardtrimmer Palson
- Baardtrimmer Imetec
- Baardtrimmer Andis
- Baardtrimmer Girmi
- Baardtrimmer VS Sassoon
Najnowsze instrukcje dla Baardtrimmer
5 Października 2024
4 Października 2024
4 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024