Instrukcja obsługi Philips Senseo HD 7825 Koffiezet apparaat

Philips ekspres do kawy Senseo HD 7825 Koffiezet apparaat

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Philips Senseo HD 7825 Koffiezet apparaat (98 stron) w kategorii ekspres do kawy. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/98
HD7827, HD7825
2
A
B
C
D
O
N
M
L
K
J
I
F G H
E
3
1
4

 6
 28
 51
 74
6

Congratulations on your purchase and welcome
to Philips! To fully benet from the support that
Philips offers, register your product at www.philips.
com/welcome.
Make your coffee moments truly special with
SENSEO®. This unique system combines the
easy-to-use Philips SENSEO® coffee machine with
the specially developed Douwe Egberts SENSEO®
coffee pods, giving you a full, smooth coffee with a
delicious foam layer.
The Douwe Egberts coffee in convenient SENSEO®
coffee pods and Philips’ unique new SENSEO®
brewing system are perfectly matched to ensure that
the best taste and aroma are extracted from the
coffee.
To ensure a smooth and full coffee taste, you should
keep the following things in mind:

Use fresh water every day. If you have not used the
coffee machine for three days, you have to ush it
with fresh water before you use it again (see section
‘Flushing’ in chapter ‘Cleaning’).

Use the SENSEO® coffee pods that have been
specially developed by Douwe Egberts for your
SENSEO® coffee machine for a full, round taste.
The Douwe Egberts SENSEO® coffee pods stay
fresh longer if you store them in an airtight storage
container.
Discover all SENSEO® coffee blends that are
available at www.senseo.com.



Note: Philips has improved the ushing and descaling
procedures. See chapters ‘Cleaning’ and ‘Descaling’ for
the new procedures.
Clean and descale your Philips SENSEO® coffee
machine regularly.
- Remove used coffee pods after brewing. If a used
pod has been left in the coffee machine and you
have not used the machine for some time, ush
the machine before you use it again (see section
‘Flushing’ in chapter ‘Cleaning’).
- If you have not used the coffee machine for three
days, you have to ush the machine with fresh
water before you use the machine again (see
section ‘Flushing’ in chapter ‘Cleaning’).
- Descale the SENSEO® coffee machine as
described in chapter ‘Descaling’ when the
CALC light goes on (after you have brewed
approx. 400 cups of SENSEO® coffee). You can
also descale the SENSEO® coffee machine more
often (every 3 months) in the same way. Descaling
takes 20 to 30 minutes. Do not interrupt the
descaling process.

Water reservoir
Grip area
Sealing ring
Water distribution disc
CALC light
1-cup button q
On/off button with light ring
2-cup button qq
Drip tray
 7
- After unpacking the machine, never put your
SENSEO® machine on its side. Always keep it in
upright position, also during transport.
- This machine is intended for normal household
use only. It is not intended for use in environments
such as staff kitchens of shops, ofces, farms or
other work environments. Nor is it intended
to be used by clients in hotels, motels, bed and
breakfasts and other residential environments.

This machine complies with all standards regarding
electromagnetic elds (EMF). If handled properly
and according to the instructions in this user manual,
the machine is safe to use based on scientic
evidence available today.

YOU CANNOT BREW COFFEE IF YOU
HAVE NOT FLUSHED THE SENSEO® COFFEE
MACHINE FIRST!
The ushing cycle causes the boiler to be lled with
water. After this, the coffee machine is ready for use.
Flush the machine in the following way:
1 Remove the water reservoir.
2 Fill the water reservoir with cold water up to
the  indication and put it back onto the
machine.
3 Put the plug in an earthed wall socket.
10
4 Put a bowl (with a capacity of at least 1500 ml)
under the spout openings to collect the water.
Note: The 1-cup pod holder is already in the machine.
Leave the pod holder in the machine when you ush it.
5 Press the on/off button 3.
,The light ring around the on/off button lights
up to indicate that you have to ush the
machine.
6 Press the 1-cup button q and the 2-cup button
qq briey at the same time to start the
ushing cycle.
Never interrupt the ushing cycle halfway. If you
do, the boiler does not ll itself properly.
,The light ring around the on/off button starts
ashing to indicate that the ushing cycle has
started. The ushing cycle takes approx. 1.5 to
2.5 minutes.
,During the ushing cycle, the boiler lls itself
with water from the water reservoir and cold
water comes out of the coffee spout. During the
ushing cycle, the machine produces more noise
than during a regular brewing cycle.
,When all the water in the water reservoir has
been used up, the ushing cycle is nished and
the machine switches off.
7 Clean the coffee spout, the coffee collector
and the pod holders with hot water and some
washing-up liquid or in the dishwasher. Clean
 11
the water reservoir thoroughly in hot water, if
necessary with some washing-up liquid.
Now your Philips SENSEO® coffee machine is ready
for use.

1 Fill the water reservoir with cold water up to
the indication and put it back onto the
machine.
Never pour milk, coffee, hot water or carbonated
water into the water reservoir.
The MIN indication on the water reservoir
indicated the minimum amount of water required
for brewing coffee. Always ll the water reservoir
beyond the MIN level.
2 Press the on/off button 3.
,The light ring ashes slowly while the water
heats up. Heating up takes approx. 75 seconds.
,The coffee machine is ready for use when
the light ring lights up continuously.
Note: If the light ring ashes rapidly, the water reservoir
does not contain enough water for brewing one cup of
coffee.
3 Release the lid by moving the lever upwards.
,The lid opens automatically.
4 Place the appropriate pod holder in the
machine.
Note: Make sure the pod holder is clean and the
sieve in the centre is not clogged, e.g. with loose coffee
grounds.
12
this case, the light ring around the on/off button
ashes intermittently.
7 Place one cup or two cups under the
spout openings. You can adjust the height
of the coffee spout by sliding it upwards or
downwards.
The cups you use should have a capacity of at least
150 ml. Do not use cups that are too large, as
they cause the coffee to get cold more quickly.
8 Press the button indicating the number of cups
of SENSEO® coffee you want to brew.
- Press the 1-cup button q for one cup.
- Press the 2-cup button qq for two cups.
,The SENSEO® coffee machine starts brewing.
- The machine automatically supplies the optimal
amount of water.
- You can interrupt the brewing process at any time
by pressing the on/off button 3. If you switch
the machine back on after having interrupted the
brewing process, the machine does not complete
the interrupted brewing cycle.
Do not remove the water reservoir during a
brewing cycle, as this causes the machine to
draw in air. When this happens, the next cup is
only partly lled.
Note: If no coffee comes out of the machine, you have
not ushed the machine before rst use. As a result,
the boiler is not lled. Flush the machine as described
in chapter ‘Before rst use’ before you start brewing
coffee. If only a small amount of coffee comes out of
the machine, ush the machine as described in section
‘Flushing’ in chapter ‘Cleaning’ before you brew another
cup of coffee.
14
5 Disassemble the coffee spout if you want to
clean it more thoroughly.
6 Clean the coffee spout, the coffee collector
and the drip tray in hot water, if necessary with
some washing-up liquid, or in the dishwasher.
7 Hold the cup tray in your hand while you
clean it with hot water. If necessary, use some
washing-up liquid.
The cup tray can also be cleaned in the dishwasher.
To clean the cup tray, always remove it from the
machine, as it might prove sharp when handled
incorrectly. Always handle it carefully.
8 Clean the pod holders in hot water, if
necessary with some washing-up liquid, or in
the dishwasher.
Check if the sieve in the centre of the pod holder is
clogged. If this is the case, unclog the sieve by rinsing
the pod holder under a running tap. If necessary, use
a washing-up brush to clean the sieve.
9 Clean the water reservoir in hot water, if
necessary with some washing-up liquid.
Note: If you use a washing-up brush, be careful not to
damage the valve in the bottom of the water reservoir.
16
Problem Solution
The light
ring around
the on/off
button ashes
slowly.
You have used the SENSEO® coffee machine at an
altitude higher than 2200 metres above sea level. This
has caused the water in the machine to start boiling
before it has reached the required temperature,
which prevents the machine from functioning
properly. Switch off the machine and no longer use it
at altitudes higher than 2200 metres above sea level.
The CALC light
ashes. You have pressed the 1-cup button and the 2-cup
button at the same time. This started the descaling
cycle. If you did not intend to start the descaling
cycle, simply press the on/off button to switch off the
machine. If you did intend to start the descaling cycle,
do not interrupt this cycle but let the appliance
operate until the water reservoir is empty.
The light ring
around the
on/off button
continues to
ash rapidly.
Make sure that:
the water reservoir is placed properly;
there is enough water in the water reservoir (i.e.
above the q MIN level if you want to brew 1 cup);
the ambient temperature is not lower than 10°C. If it
is, the machine does not function properly.
Water leaks
from the coffee
machine.
Make sure that:
the water reservoir has not been lled beyond the
MAX level;
 23
Problem Solution
the sieve in the centre of the pod holder is not
clogged. If it is, unclog the sieve by holding the pod
holder under a running tap;
the coffee pod has been put properly in the centre
of the pod holder;
the sealing ring has not got stuck under the edge
of the water distribution disc (see gure 1 at the
beginning of this user manual).
the water drops on the worktop are not the result
of placing or removing the water reservoir or
removing used coffee pods.
you do not remove the water reservoir when the
coffee machine is heating up. This may cause water
that normally ends up in the water reservoir to leak
out of the machine.
In all other cases, contact the Philips Consumer Care
Centre in your country.
I cannot take
the coffee
spout out of
the machine.
You can only remove the coffee spout after you have
removed the coffee collector.
I cannot open
the lid. A vacuum may have temporarily formed under the
lid.
Switch off the machine. Pull up the lever as far as it
goes and wait 24 hours before you open the lid. You
may need to use quite some force.
24


Specyfikacje produktu

Marka: Philips
Kategoria: ekspres do kawy
Model: Senseo HD 7825 Koffiezet apparaat

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Philips Senseo HD 7825 Koffiezet apparaat, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje ekspres do kawy Philips

Instrukcje ekspres do kawy

Najnowsze instrukcje dla ekspres do kawy