Instrukcja obsługi Philips 180mt

Philips Telewizor plazmowy LCD 180mt

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Philips 180mt (143 stron) w kategorii Telewizor plazmowy LCD. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/143

Manual

file:///D|/TV/english/180mt/Manual.htm [4/2/2003 10:41:43 AM]

Safety and Troubleshooting Information

Safety Precautions and Maintenance • Installation Locations • FAQs • Troubleshooting •

Regulatory Information • Other Related Information

Safety precautions and maintenance

WARNING: Use of controls, adjustments or procedures other than those

specified in this documentation may result in exposure to shock, electrical

hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor:

Unplug the monitor if you are not going to use it for an extensive period of time.● Unplug the monitor if you need to clean it with a slightly damp cloth. The screen many be wiped with

a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids.

●

Consult a service technician if the monitor does not operate normally when you have followed the

instructions in this manual.

●

The casing cover should be opened only by qualified service personnel.● Keep the monitor out of direct sunlight and away from stoves or any other heat source.● Remove any object that could fall into the vents or prevent proper cooling of the monitor’s electronics.● Do not block the ventilation holes on the cabinet.● Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture.● When positioning the monitor make sure the power plug and outlet are easily accessible.● If turning off the monitor by detaching power cable or DC power cord, wait for 6 seconds before

attach the power cable or DC power cord for normal operation.

●

To avoid the risk of shock or permanent damage to the set do not expose the monitor to rain or

excessive moisture.

●

When positioning the monitor, make sure the power plug and outlet are easily accessible.● IMPORTANT: Always activate a screen saver program during your application. If a still image in high

contrast remains on the screen for an extended period of time, it may leave an 'after-image' or 'ghost

image' on the front of the screen. This is a well-known phenomenon that is caused by the

shortcomings inherent in the LCD technology. In most cases the after-image will disappear gradually

over a period of time after the power has been switched off. Be aware that the after-image symptom

cannot be repaired and is not covered under warranty.

●

Consult a service technician if the monitor does not operate normally when the operating instructions given

in this manual have been followed.

RETURN TO TOP OF THE PAGE

Installation Locations

Safety & Troubleshooting

file:///D|/TV/english/180mt/safety/safety.htm (1 of 2) [4/2/2003 10:41:45 AM]

Avoid exposure to heat and extreme cold● Do not store or use the product in locations exposed to heat, direct sunlight or extreme cold.● Avoid moving the product between locations with large temperature differences. Choose a site that

falls within the following temperature and humidity ranges.

Temperature: 0-35°C 32-95°F

❍ Humidity: 20-80% RH❍

●

Do not subject the product to severe vibration or high impact conditions. Do not place the product

inside a car boot.

●

Take care not to mishandle this product by either knocking or dropping during operation or

transportation.

●

Do not store or use the product in locations where there is a high level of humidity or in dusty

environments. Do not allow water or other liquids to spill on or into the product.