Instrukcja obsługi Philips 14PV284

Philips Telewizja 14PV284

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Philips 14PV284 (12 stron) w kategorii Telewizja. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
&
The remote control
STANDBY mStandby
CLEAR Reset/clear
0-9 Digit buttons 0-9
SV/V+ ’VIDEOPlus+’ programming
TIMER kTIMER programming on the set
MENU Call menu
OK Confirm button
D/C/A/B Menu left/right/up/down
Sp Volume control
PpProgramme number Plus/Minus
MUTE yMute sound
GPLAY Playback
HRewind/Reverse scanning
STOP hPause/Stop
IForward wind/ Forward scanning
INDEX EIndex search
RECORD nRecord
STILL RStill picture
INFO ,TELETEXT page 100
TRANSP. -TELETEXT transparent
TELETEXT eTELETEXT on/off
CLOCK .TELETEXT clock time
In TELETEXT you can store the relevant page with the
OK button.
Selecting TELETEXT functions: when you are in
TELETEXT, press the MENU button. Select the
required function with the Dand the Cbuttons.
Confirm with the OK button.
Front of the set
mStandby
PpProgramme number Plus/Minus
Sp Volume control
5Record
HRewind/Reverse scanning
hPause/Stop
GPlayback
IForward wind/ Forward scanning
JCassette eject
wHeadphones socket
AUDIO Audio input socket
VIDEO Video input socket
OPERATING INSTRUCTIONS IN BRIEF
&
Programming with ’VIDEOPlus+’
All the information required for programming is encoded in the ’VIDEOPlus+’ code.
1Press the SV/V+ button on the remote control.
2Enter the entire ’VIDEOPlus+ code’. This code (up to 9 digits) is found next to the start time of a
TV programme in your TV guide.
If you entered an incorrect code number, clear it with the CLEAR button.
3If you want to repeat programming at daily or weekly intervals, select the required settings in
the ’DAILY/WEEKLY’ line.
’Daily’ programming can only be used for recordings to be made from Mondays to Fridays
inclusive.
4After confirming the corresponding data appears on the TV screen.
Note: If you use VIDEOPlus+ for the first time, the ’PROGRAMME NR.’ line appears when you
enter the VIDEOPlus+ code. Enter the required programme number.
5Confirm with the OK button.
The data has been stored in a TIMER block.
Please ensure that you loaded a cassette without erase protection.
6Press the STANDBY mbutton.
How to enter, check or clear a TIMER-block manually
1Press the TIMER kbutton.
2Select a free TIMER block or the TIMER block you want to check or clear.
3Clear: Press the CLEAR button.
4Enter/Check: Press the Dor Cbutton to switch between ’DATE’ (date), ’DW’ (daily, weekly),
’PR’ (programme number), ’START’ (start time) and ’END’ (end time).
Press the Aand the Bor the 0-9 buttons to change the data.
5To end programming, press the MENU button.
6Press the STANDBY mbutton.
Selecting a TV channel
Select the required TV channel (= programme number) with the Ppbutton or the 0-9 but-
tons on the remote control.
The selected programme number (e.g.: ’P 01’ ) appears in the upper right corner of the TV screen.
Volume control
You can control the volume level with the Sp button.
If you want to mute the sound temporarily (e.g.: during a telephone call), press the MUTE ybut-
ton on the remote control. When you press it again, the sound returns at the same volume level.
Picture control
You can control brightness, contrast, sharpness and colour here.
1Press the MENU button.
2Select and confirm the line ’PICTURE’ .
3Select and confirm the TV screen setting.
Note: In addition, you can adjust the tint for the playback of cassettes in the NTSC standard.
1
Congratulations on the purchase of one of the most
sophisticated and simple-to-use television/video recorder
combinations (TV Combi) on the market. With this TV Combi
you can record and play VHS-standard cassettes.
Please take the time to read this operating manual before
using your TV Combi.
Safety instructions and other notes
Danger: high voltage! Do not open the set. The set does not
contain any components that can be repaired by the customer.
When the appliance is connected to the power supply there are
some components that are constantly operational. To switch off
the set completely you must disconnect it from the power supply.
Note that this power pack is designed for a power supply of
220-240V/50Hz.
Ensure that air can circulate freely through the ventilation slots
on the set.
Ensure that no objects or liquids enter the set. If liquid is spilt into
it, disconnect the set immediately from the power supply and call
the After-sales Service for advice.
The set should not be used immediately after transportation from
a cold to a hot area or vice versa, or in conditions of extreme
humidity.
After unpacking the set, it should be allowed to acclimatize for at
least three hours before installation.
These operating instructions have been printed on nonpolluting
paper.
Deposit old batteries at the relevant collection points.
Please make use of the facilities available in your country for
disposing of the packaging of the set in a way that helps to
protect the environment.
This electronic equipment contains many materials that can be
recycled. Please inquire about the possibilities for recycling your
old set.
VIDEOPlus+ and PlusCode are trademarks of Gemstar Develop-
ment Corpoation. The VIDEOPlus+ system is manufactured under
licence from Gemstar Development Corporation.
Contents Page
1. INSTALLATION 2...................................
Connecting additional equipment 3...................
Emergency interrupt 3...............................
User guide 3.......................................
Making standard settings 3..........................
Setting the clock and date 3..........................
2. PLAYBACK 5.......................................
Continuous playback 5..............................
3. RECORD 6.........................................
Programming with ’VIDEOPlus+’ 7....................
4. SPECIAL FEATURES 8...............................
On Screen Display (OSD) 8...........................
Sleep function (switch off) 8.........................
Switch set on function 9.............................
Child lock 9........................................
Before you call an engineer 10.......................
OPERATING INSTRUCTIONS PHILIPS 14PV284/05


Specyfikacje produktu

Marka: Philips
Kategoria: Telewizja
Model: 14PV284

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Philips 14PV284, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Telewizja Philips

Philips

Philips 40PFS6009 Instrukcja

6 Października 2024
Philips

Philips 50PUS8079 Instrukcja

5 Października 2024
Philips

Philips 65PUS8109 Instrukcja

5 Października 2024
Philips

Philips 75PUS8079 Instrukcja

5 Października 2024
Philips

Philips 55OLED769 Instrukcja

5 Października 2024
Philips

Philips 75PUS8919 Instrukcja

5 Października 2024
Philips

Philips 65OLED759 Instrukcja

5 Października 2024

Instrukcje Telewizja

Najnowsze instrukcje dla Telewizja

Samsung

Samsung QN85QN800AF Instrukcja

15 Października 2024
Thomson

Thomson 24TM2490 Instrukcja

15 Października 2024
Daewoo

Daewoo DSJ-5520 Instrukcja

15 Października 2024
Sharp

Sharp LC-52D65U Instrukcja

15 Października 2024
Medion

Medion MD30348 Instrukcja

15 Października 2024
Hisense

Hisense 50A7100FTUK Instrukcja

15 Października 2024
Bauhn

Bauhn ATV24HDW-0224 Instrukcja

15 Października 2024
Bauhn

Bauhn ATV32HDW-0824 Instrukcja

15 Października 2024
Bauhn

Bauhn ATV75UHDW-0324 Instrukcja

15 Października 2024
Bauhn

Bauhn ATV70UHDW-0624 Instrukcja

15 Października 2024