Instrukcja obsługi Peerless PS200

Peerless Niesklasyfikowane PS200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Peerless PS200 (21 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/21
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 865-2112 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 06-08-07 SHEET #: 083-9004-4 05-25-10
Installation and Assembly:
Paramount™ A/V Component Shelf
Model: PS200
Maximum UL Load Capacity:
100 lb (45.4 kg)
This product is intended for use with UL
Listed products and must be installed by a
qualifi ed professional installer.
2 of 21 ISSUED: 06-08-07 SHEET #: 083-9004-4 05-25-10
Note: Read entire instruction sheet before you start installation and assembly.
Tools Needed for Assembly
• stud fi nder ("edge to edge" stud fi nder is recommended)
• phillips screwdriver
• drill
• 5/16" bit for concrete and cinder block wall
• 1/2" bit for metal stud wall
• 5/32" bit for wood stud wall
• level
For customer care call (800) 865-2112 or (708) 865-8870.
Accessories (sold separately)
• 2 piece Metal Stud Fastener Kit (ACC 215) (Metal Stud
not evaluated by UL)
• Safety Belt (ACC 322)
Table of Contents
Parts List.................................................................................................................................................................................3
Installation to Wood Stud Wall ................................................................................................................................................4
Installation to Solid Concrete or Cinder Block ........................................................................................................................5
Installing Support Arms and Wall Plate Cover ........................................................................................................................6
Installing Safety Belt (ACC 322 sold separately) ....................................................................................................................7
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact
your local distributor.
• This product should only be installed by someone of good mechanical aptitude, has experience with basic building
construction, and fully understands these instructions.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
• Never exceed the Maximum Load Capacity. See page one.
• If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of
an "edge to edge" stud fi nder is highly recommended.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
• This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal
injury.
• This product was designed to be installed on the following wall construction only;
WALL CONSTRUCTION HARDWARE REQUIRED
• Wood Stud Included
Wood Beam Included•
Solid Concrete Included•
Cinder Block Included•
Metal Stud Do not attach except with Peerless Metal Stud Accessory Kit; •
(not evaluated by UL)
• Brick Contact Qualifi ed Professional (not evaluated by UL)
Other or unsure? Contact Quali• fi ed Professional
WARNING
3 of 21 ISSUED: 06-08-07 SHEET #: 083-9004-4 05-25-10
DE
Before you begin, make sure all parts shown are included with your product.
Parts may appear slightly dierent than illustrated.
A
C
B
For mounting under a surface
Measure the height of the component to be placed onto
the mount, this measurement will be referred to as .H
Determine minimum distance from surface bottom to X
mounting hole centers using the formula X = H - 0.5" or
X = H - 13 mm
Note: If height of component is less than 4.5" (114
mm), a minimum distance of 4" (102 mm) is required for
X.
For mounting above a surface locate mounting hole
centers no less than 7.25" from surface top.
X = H - 0.5"
X = H - 13 mm
H
SIDE VIEW
1
E
X
B
7.25"
(184 mm)
MINIMUM
SURFACE TOP
SURFACE BOTTOM
DVD PLAYER,
AMPLIFIER, ETC.
F
PS200
Description Qty. Part #
A
support arm 2 083-0016
Bwall plate 1 083-P1019
Cwall plate cover 1 590-1281
Dconcrete anchor 2 590-0320
E#14 x 2.5" wood screw 2 5S1-015-C03
Fsafety belt 1 083-8015
Parts List

Specyfikacje produktu

Marka: Peerless
Kategoria: Niesklasyfikowane
Model: PS200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Peerless PS200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Peerless

Peerless

Peerless KIL643-EUK Instrukcja

1 Października 2024
Peerless

Peerless KIP588-2LG-EUK Instrukcja

1 Października 2024
Peerless

Peerless KIPC2549-EUK Instrukcja

1 Października 2024
Peerless

Peerless PLP-V4X4 Instrukcja

1 Października 2024
Peerless

Peerless ACC-MSF-W Instrukcja

1 Października 2024
Peerless

Peerless ACC-MS Instrukcja

1 Października 2024
Peerless

Peerless KIP746-EUK Instrukcja

1 Października 2024
Peerless

Peerless IRTO49-100 Instrukcja

1 Października 2024
Peerless

Peerless KIPC2565B-EUK Instrukcja

1 Października 2024
Peerless

Peerless KIPC2543B-EUK Instrukcja

1 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024