Instrukcja obsługi Peavey PVs 15

Peavey głośnik PVs 15

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Peavey PVs 15 (20 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
www.peavey.com
PVs 15 Sub
Enclosure
Operating
Manual
FCC CAUTION:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harm-
ful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment,
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The equipment should be installed and operated with minimum distance 5cm between the radiator and
your body.
IC WARNING:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the fol-
lowing two conditions: (1) this device may not cause interference, and (2) this device must accept any inter-
ference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
the device is compliance with RF exposure guidelines, and the equipment should be installed and operated
with minimum distance 5cm between the radiator and your body.
l’appareil est conforme aux directives d’exposition RF, et l’équipement doit être installé et exploité avec une
distance minimale de 5 cm entre le radiateur et votre corps.
Description
e Peavey® PVs 15 Sub is a compact vented powered subwoofer system utilizing a 15” heavy-duty woofer, cou-
pled to a DSP controlled power amplier with 1,000 watts peak available power. e full-length black perforated
steel grille provides protection and a professional appearance, along with the sturdy steel handles for moving the
Sub. Large heavy-duty locking casters on the rear provide for easy transport on suitable surfaces.
Internal line-level crossover with two high-pass outputs, and one full-range thru output. Peavey’s new switchable
bass enhancer for extra bass punch from low frequency program material is incorporated for maximum versatil-
ity.
A threaded pole-mount system provides a sturdy and stable platform to mount a suitably equipped speaker sys-
tem above the sub woofer. e PA™ two-way powered speaker series are an excellent partner for the PVs 15 Sub.
e PVs 15 Sub speaker system power amplier providing the power is a low-distortion reliable fan-cooled unit
providing a total of 1,000W peak available power for the system. e power supply for the power amp is a switch
mode type for low weight and high eciency. e amplier features DSP processing for the crossover functions,
compression and limiting, and the low-frequency EQ.
Input is via a combo female XLR and 1/4” TRS phone jack with balanced input to the preamp/EQ electronics,
and a gain control.
A pair of High-Pass Outputs in the form of male XLR jacks provides a buered and balanced output signal for
satellite speakers to carry the high range of the music. A Full-Range ru output has a male XLR connector.
ese outputs allow linking of additional speaker systems, or feed of the signal to other devices, etc.
Features
• Vented bass powered subwoofer enclosure
• 1,000 watts peak available power
• 15” Heavy Duty Woofer
• Power Amp has forced air cooling for maximum reliability
• Internal line level low-pass/high-pass crossover network
• DSP based crossover, compression, limiting and EQ.
• Bass Enhance button for increased bass impact
• XLR/one quarter inch combo jack input
• Two High-Pass XLR outputs, One Full Range ru XLR output
• Polarity Switch for polarity reversal of subwoofer
• Ground Li for liing cable shield from ground
• Full-coverage heavy-duty perforated steel grill
• Steel handles
• Large heavy-duty locking casters with damped bearings
• Compact dimensions for a 15” woofer based sub
• readed Pole Mount with speaker pole included
Applications
e Peavey PVs 15 Sub has a variety of applications such as extending the bass performance of smaller full-range
speaker systems for sound reinforcement, public address, side ll system, karaoke or musical playback.
A typical signal source for the line-level inputs of the Peavey PVs 15 Sub would be a sound reinforcement mixing
console (mixer) or the output from a CD player, MP3 player or tape deck. e high-pass ltered signal from the
PVs 15 Sub would then be sent to a full-range powered speaker system, easing the burden of deep bass from this
speaker system.
ENGLISH

Specyfikacje produktu

Marka: Peavey
Kategoria: głośnik
Model: PVs 15

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Peavey PVs 15, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Peavey

Peavey

Peavey S-12825 RB Instrukcja

3 Października 2024
Peavey

Peavey SSE 10 Instrukcja

24 Września 2024
Peavey

Peavey RBN 118 Instrukcja

17 Września 2024
Peavey

Peavey PHR 860S Instrukcja

15 Września 2024
Peavey

Peavey PVs 18 Instrukcja

15 Września 2024
Peavey

Peavey SP 218P Instrukcja

14 Września 2024
Peavey

Peavey ISM 5Tx Instrukcja

11 Września 2024
Peavey

Peavey PV 115D Instrukcja

11 Września 2024
Peavey

Peavey RBN 110 Instrukcja

8 Września 2024
Peavey

Peavey RX 22N Instrukcja

7 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024