Instrukcja obsługi Panduit PZICEA


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panduit PZICEA (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
INSTALLATION INSTRUCTIONS CM361C
© Panduit Corp. 2008
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
Page 1 of 8
P Z AN ONE In-Ceiling Enclosure
PZICEA Active Equipment Version
Part Numbers:PZICEA
List of Components:
(1) Set of two Keys
(1) Left Mounting Bracket
(1) Right Mounting Bracket
(1) Fan Module
(6) Grommets
(2) Tak-Ty Rolls (Hook and Loop)
(4) Self-Tapping #10-32 screws
(1) Ceiling Tile Template
(1) Electrical Junction Box
(1) Integrated Horizontal Slack Manager
(1) Adjustable Air Dam
(2) Filters
(4) Entry/Exit Knockout Plates
Install in Ceiling..........................................................................................................................................
Electrical Installation.................................................................................................................................
Equipment Installation...............................................................................................................................
Cable Routing and Slack...........................................................................................................................
Patch Cord Management...........................................................................................................................
Maintenance...............................................................................................................................................
Accessories................................................................................................................................................
2
3
4
5
6
8
8
Table of Contents
Fan Module
Air Inlet
Entry/Exit Knockout Plates (4x)
Electrical Junction Box
Mounting Brackets
Keyed Locks
Integrated
Horizontal
Slack Manager
Adjustable Air
Dam
#10-32 screwsSet of two keys Grommets Ceiling tile template Tak -Ty Rolls
Note: Enclosure door load rating
is 50 lbs.
INSTALLATION INSTRUCTIONS CM361C
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 8
Install in Ceiling
Install (4) threaded rods to the building structure. The threaded rod must
be attached on all four corners of the enclosure with a nut and washer
above and below the support bracket. Level the enclosure so the weight
is not supported by the ceiling grid system.
Ceiling Tile Cutout
Place the included ceiling tile cutout template over
the removed ceiling tile. Secure the template with
tape of thumb tacks. Trace the outline with a utility
knife to extract the necessary shape to insert into
the enclosure.
While the enclosure is installed in the ceiling and open, remove the (3) #6-32 screws and ceiling tile bracket as shown below. Once
removed, slide the ceiling tile cutout into place fitting around the fan module. After proper orientation is achieved, replace the ceiling tile
bracket and the (3) #6-32 screws back into enclosure.
Insert Ceiling Tile Cutout into Housing
#6-32
Screws
Ceiling Tile
Bracket
Ceiling Tile
Cutout
Ceiling Tile
Ceiling Tile
Template
Thumb Tacks
INSTALLATION INSTRUCTIONS CM361C
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 3 of 8
Electrical Installation
Included with the product is a standard electrical junction box. Mounting and installing the electrical components and receptacles should be
completed by a experienced professional to the latest local building codes and regulations.
Conduit Knockouts
Mounting Holes
(Receptacles not included)
Mount the electrical box to the side of the enclosure.
Use (4) # 10-32 thread cutting screws to attach the
box to the exterior.
Cross-sectional view from inside enclosure
NOTE: Install power per local building codes and regulations.
#10-32 Thread Cutting Screws
Mounting the Electrical Junction Box
Above the junction box is shown with already
installed receptacles.


Specyfikacje produktu

Marka: Panduit
Kategoria: Niesklasyfikowane
Model: PZICEA

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panduit PZICEA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Panduit

Panduit

Panduit FPONE4 Instrukcja

31 Grudnia 2025
Panduit

Panduit FPONE1 Instrukcja

31 Grudnia 2025
Panduit

Panduit FPONE3 Instrukcja

31 Grudnia 2025
Panduit

Panduit FPONE2 Instrukcja

31 Grudnia 2025
Panduit

Panduit MEHT187 Instrukcja

28 Grudnia 2024
Panduit

Panduit CDE3 Instrukcja

28 Grudnia 2024
Panduit

Panduit EC001 Instrukcja

28 Grudnia 2024
Panduit

Panduit PZICE Instrukcja

15 Grudnia 2024
Panduit

Panduit PZICEA Instrukcja

15 Grudnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane