Instrukcja obsługi Panduit N82SPS


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panduit N82SPS (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
INSTRUCTIONS CM614A
© Panduit Corp. 2013-2014
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
N
ET
-A
CCESS
N-Type Network Cabinets
(Side Panels - N21SPS, N51SPS, N22SPS, N52SPS
)
Page 1 of 2
Side Panel Support Bracket Installation
Secure Side Panel Support Bracket to cabinet frame with [2] M5 Torx Screws.
[2] M5 Torx Screws
(use T25 Torx bit)
Side Panel Support
Bracket
INSTRUCTIONS CM614A
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp www.panduit.com
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Page 2 of 2
Spring Loaded Hinge Pin
(Top and Bottom)
Move Finger Pull into
Slot to Lock Hinge Pin
in OPEN position
(Front Side Panel only)
Rear Side Panel
Front Side Panel
Rear Side Panel
Cover Plate
Plunger
Grommet Front Catch Plate
Front Front
Side Panel Installation
Rear Side Panel with Bumper Plate to be installed first.
Remove [2] top Cover Plates of Rear Side Panel by pulling plunger slightly to release Cover Plate. (Bumper Plate will be to center of
cabinet.)
Tilt the Rear Side Panel and insert [2] bottom Hinge Pins into bushing and slot of Support Bracket. Pull top Spring Loaded Hinge Pins
and engage with cabinet frame and Top Cap.
Ensure Catch Plate on Front Side Panel is facing center of cabinet. Pull and lock [3] Spring Loaded Hinge Pins of Front Side Panel
leaving the bottom rear hinge pin in the released position. Insert bottom rear hinge pin into bushing of Side Panel Support Bracket..
Release rear top Spring Loaded Hinge Pin and ensure that panel is engaged with cabinet frame. Close Panel and release front Hinge
Pins.
to remove In-Row Side PanelsREVERSE STEPS
IMPORTANT: Remove Rear Split doors prior to Removal and Installation. Install Rear Side Panel First
Bumper Plate


Specyfikacje produktu

Marka: Panduit
Kategoria: Niesklasyfikowane
Model: N82SPS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panduit N82SPS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Panduit

Panduit

Panduit NKUSBAA Instrukcja

10 Stycznia 2025
Panduit

Panduit NKHDMI Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4BC Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4JB2S Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4CC Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4WTR Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4TRT70 Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4TBLG Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4RA Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4EC Instrukcja

10 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane