Instrukcja obsługi Panduit FXTHP6NLDSNM025

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panduit FXTHP6NLDSNM025 (2 stron) w kategorii Kabels voor pc's en randapparatuur. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2013 FS046A
Page 1 of 2
Tak-Ty Option
Ta k-Ty
Slot features in the cable transition allows for the use of a Tak-Ty
to either secure the cable harness to a rack feature, such as
cable management fingers, or to more robustly secure multiple
cable transitions that are interlocked together.
PanMPO to LC Uniboot
Cable Harness (Hydra)
3.0mm round cable clips
3.0mm round cable
Housing ribs
(Transitions interlocked)
(Cable secured in clip)
Cable management example
Cable Clips & Housing Ribs Option
Cable Transition Usage
LC Uniboot PanMPO
Connectors Connector
Cable transition
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2013 FS046A
www.panduit.com
Page 2 of 2
LC Uniboot Polarity Changeover - Pair Flipping
1
2
3
4
Squeeze both sides of the LC Uniboot cover evenly and
pull back to disengage the tab on the opposite side.
Slide the LC Uniboot cover back away from connectors and
rotate 180°.
Rotate each LC connector downward 180°. Re-install the LC Uniboot cover until you hear an audible click.
PanMPO Gender Changeover
Squeeze both sides of the outer housing at the back end evenly
until you hear an audible click. Pull off connector to remove.
Locate hole in the inner housing on the slotted side and position
pin retraction tool over the hole.
Insert tool into hole, press down gently, and push backward to
retract connector pins to the female state. Repeat process in
opposite direction to extract pins for male state.
Re-install the outer housing. Ensure the key is in the proper
orientation. See PanMPO polarity changeover instructions on
page 2 of FS041* for more details.
4
3Female = Pins retracted
Pins
retracted
Gently
CAUTION! Only Panduit tool is to be
used for gender change. Use of any
other tool can cause fiber damage and
will void the product warranty.
Pin retraction
tool
Hole
2
Pins
extracted
1
Outer
housing
Male = Pins extracted
*Denotes instruction sheet revision letter.

Specyfikacje produktu

Marka: Panduit
Kategoria: Kabels voor pc's en randapparatuur
Model: FXTHP6NLDSNM025

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panduit FXTHP6NLDSNM025, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kabels voor pc's en randapparatuur Panduit

Instrukcje Kabels voor pc's en randapparatuur

Najnowsze instrukcje dla Kabels voor pc's en randapparatuur

Manhattan

Manhattan 174947 Instrukcja

16 Września 2024
FiiO

FiiO LC-BT1 Instrukcja

15 Września 2024
Manhattan

Manhattan 151061 Instrukcja

15 Września 2024
Sonero

Sonero X-AOC210-400 Instrukcja

14 Września 2024
Manhattan

Manhattan 153348 Instrukcja

13 Września 2024
Manhattan

Manhattan 152587 Instrukcja

13 Września 2024
Sanus

Sanus SA304 Instrukcja

13 Września 2024
Manhattan

Manhattan 152365 Instrukcja

12 Września 2024
Manhattan

Manhattan 308229 Instrukcja

12 Września 2024