Instrukcja obsługi Panduit DIRBB2007S21W

Panduit Niesklasyfikowane DIRBB2007S21W

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panduit DIRBB2007S21W (11 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/11
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012 CM643B
INLET DUCT FOR CISCO 7004
Part Number(s): DIRBB2007S21W
Page 1 of 11
(1) Inlet Duct Box (1) Right Hand
Bracket (1) Side Duct
(2) Adjustable
Brackets
(1) Left Hand
Bracket
(1) Side Duct
Mounting Bracket A
(1) Side Duct
Mounting Bracket B
Component Guide Note: Bracket Has (2)
Notches on the Top
Rear of Cabinet
(Hot Aisle)
Front of Cabinet
(Cold Aisle)
7004
Inlet Duct
For a Net-Access Legacy
or Net-Access N-Type
Switch Cabinet
(CN*** or N***)
(1) Side Duct
Mounting Bracket C
For (FSNA110-820 series server)
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012 CM643B
Device
Keep-Out Area
RUs 42-45
Device
Keep-Out Area
RUs 20-23
Device
Keep-Out Area
RUs 1-2
Device Can Be
Installed in
RUs 3-19
Device Can Be
Installed in
RUs 24-41
Device Placement (Legacy Cabinets Only)
Due to physical constraints posed by the front-to-back beams on the Net-Access Legacy cabinet, there
are certain areas of the cabinet that the device can not be mounted in when used in conjunction with this
inlet duct.
For Net-Access Legacy cabinets, front equipment rails need to be in full forward position and the rear
equipment rails need to be 24.25" - 26.12" back.
NOTES: Numbers-up RU numbering (#1 at bottom) assumed.
STEP 1
Device
Keep-Out Area
RUs 39-42
Device
Keep-Out Area
RUs 20-23
Device
Keep-Out Area
RUs 1-2
Device Can Be
Installed in
RUs 3-19
Device Can Be
Installed in
RUs 24-38
42 RU Net-Access CN*** Cabinet
(Legacy)
45 RU Net-Access CN*** Cabinet
(Legacy)
Page 2 of 11
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2012 CM643B
Device Placement (N-Type Cabinets Only)
For Net-Access (N***) Cabinets, there are no device keep out areas. The only restriction on the switch
placement is that 2 RU must be left open above the switch.
For Net-Access (N***) cabinets, front equipment rails need to be in full forward position and the rear
equipment rails need to be 24.25" - 26.12" back.
NOTES:
Numbers-up RU numbering (#1 at bottom) assumed.
STEP 2
Device
Keep-Out Area
RUs 44-45
Device Can Be
Installed in
RUs 1-43
Device
Keep-Out Area
RUs 41-42
Device Can Be
Installed in
RUs 1-40
45 RU Net-Access
N*** Cabinet
42 RU Net-Access
N*** Cabinet
Page 3 of 11


Specyfikacje produktu

Marka: Panduit
Kategoria: Niesklasyfikowane
Model: DIRBB2007S21W

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panduit DIRBB2007S21W, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Panduit

Panduit

Panduit NKUSBAA Instrukcja

10 Stycznia 2025
Panduit

Panduit NKHDMI Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4BC Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4JB2S Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4CC Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4WTR Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4TRT70 Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4TBLG Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4RA Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4EC Instrukcja

10 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane