Instrukcja obsługi Panduit CNDDE


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panduit CNDDE (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
INSTRUCTIONS CM362
© Panduit Corp. 2008
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
Page 1 of 3
NET-ACCESS Dual Hinge Door Enhanced
Part Numbers: CNDDE
Dual Hinge Door Installation and Removal (CNDDE)
To install, lift door and insert lower hinge pin into the bushing in the bottom door support. Orient the door so the top hinge pin is near the top
cabinet bushing. Using a pinching action, pull the red finger handle over and down to retract the hinge pin. Release the red finger handle
when aligned with the top bushing. To remove, support the door on the open side with one hand while retracting the hinge pin with the other
hand as described above.
Upper Hinge Location
Note: For cleaning PANDUIT recommends using SIMPLE GREENall purpose cleaner
(or local equivalent) and a lint free cloth
Lower Hinge Location
Caution: Support the weight of
the door during removal.
INSTRUCTIONS CM362
For Technical Support: www.panduit.com/resources/install_maintain.asp
Dual Hinge Door Usage (CNDDE)
The dual hinge door has the unique ability to open on either the left or the right side. This allows full access to either side of the cabinet. For
safety, the dual hinge door events handles from turning when features an interlock system that pr either side is open. To close a handle that
is locked open, press the spring-loaded levers in the top and the bottom corners of the door and turn the handle simultaneously.
Spring Loaded Lever
Spring Loaded Lever
See note below
Note: Depress levers simultaneously to disengage handle interlock.
See note below
Fascia Installation
Remove 3 keyed knockouts and secure the fascia with the 3 screws provided
Page 2 of 3
INSTRUCTIONS CM362
For instuctions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
cs@panduit.com
Fax:
(708)444-6448
www.panduit.com
Page 3 of 3
Door Adjustment (CNDDE)
The cabinet is equipped with a bottom door shoe lift bushing. The purpose of this lift bushing is to provide vertical adjustment within the
cabinet door frame and enable cabinet doors to be adjusted for a consistent fit and function.
Exploded View
Lift Screw
Bushing
Set Screw
Dual hinge door
Split Doors
Network Cabinet
Dual Hinge Door
The door shoe lift bushing allows field adjustments on the cabinet doors. Loosen the set screw and adjust the lift screw with a 3/32 allen key
wrench raising the screw lifts the door, and adjust the door's fit within the cabinet door frame.
Door adjusted by lift bushing
maintaining consistent top gaps
Corrected door fit by adjusting
opposite side lift screw.
Re-tighten set screws when
desired fit is achieved
Unleveled cabinet causing insufficient
gap between door and door shoe,
resulting in rubbing or interference
with bottom door shoe.
Raise opposite side lift screw to
correct.


Specyfikacje produktu

Marka: Panduit
Kategoria: Niesklasyfikowane
Model: CNDDE

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panduit CNDDE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Panduit

Panduit

Panduit NKUSBAA Instrukcja

10 Stycznia 2025
Panduit

Panduit NKHDMI Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4BC Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4JB2S Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4CC Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4WTR Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4TRT70 Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4TBLG Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4RA Instrukcja

10 Stycznia 2025
Panduit

Panduit AFR4EC Instrukcja

10 Stycznia 2025

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane