Instrukcja obsługi Panasonic PT-LB20


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panasonic PT-LB20 (144 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/144
ENGLISH
R
Before operating this product, please read the instructions carefully and save this
manual for future use.
LCD Projector
Operating Instructions
Model No. PT-LB20NTU
PT-LB20U
PT-LB20SU
PT-LB20VU
TQBJ 0166
Commercial Use
ENTER
FREE Z E
SHUTTE R
INDEX
WINDOW
PROJECTOR
VOLUME D.Z OOM
STD
AUTO
SETU P
VIDE O
INPUT
POWER
RGB
MENU
2-ENGLISH
IMPORTANT SAFETY NOTICE
Dear Panasonic Customer:
This instruction booklet provides all the necessary operating information that
you might require. We hope it will help you to get the most out of your new
product, and that you will be pleased with your Panasonic LCD projector.
The serial number of your product may be found on its bottom. You should
note it in the space provided below and retain this booklet in case service is
required.
Model number: PT-LB20NTU / PT-LB20U / PT-LB20VU / PT-LB20SU
Serial number:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
Power Supply: This LCD Projector is designed to operate on 100 V – 240 V, 50 Hz/60
Hz AC, house current only.
CAUTION: The AC power cord which is supplied with the projector as an accessory can
only be used for power supplies up to 125 V, 7 A. If you need to use higher
voltages or currents than this, you will need to obtain a separate 250 V
power cord. If you use the accessory cord in such situations, fire may result.
ENGLISH-3
Preparation
CAUTION:
This equipment is equipped with a three-pin
grounding-type power plug. Do not remove the
grounding pin on the power plug. This plug will only
fit a grounding-type power outlet. This is a safety
feature. If you are unable to insert the plug into the
outlet, contact an electrician. Do not defeat the
purpose of the grounding plug. Do not remove
WARNING:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, use only shielded
interface cables when connecting to computers or
peripheral devices.
Any unauthorized changes or modifications to this
equipment will void the users authority to operate.
If you use serial port to connect PC for external control of
projector, you must use optional RS-232C serial interface
cable with ferrite core. Any unauthorized changes or
modifications to this equipment will void the user
s
authority to operate.
FCC RF Exposure Warning: (if provided with wireless device)
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment.
This equipment has been approved for mobile operation and requires
minimum 20 cm spacing be provided between antenna(s) and all
person's body (excluding extremities of hands, wrist and feet) during
wireless modes of operation.
This equipment may not be used with other installed transmitters, which
may be capable of simultaneous transmission.


Specyfikacje produktu

Marka: Panasonic
Kategoria: Projektor
Model: PT-LB20

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panasonic PT-LB20, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Projektor Panasonic

Panasonic

Panasonic PT-AX200E Instrukcja

7 Października 2024
Panasonic

Panasonic PT-D3500E Instrukcja

5 Października 2024
Panasonic

Panasonic PT-D9510 Instrukcja

2 Października 2024
Panasonic

Panasonic PT-EZ590 Instrukcja

1 Października 2024
Panasonic

Panasonic PT-EZ570 Instrukcja

30 Września 2024
Panasonic

Panasonic PT-L780U Instrukcja

30 Września 2024
Panasonic

Panasonic PT-AH1000 Instrukcja

26 Września 2024
Panasonic

Panasonic PT-LB50SE Instrukcja

17 Września 2024
Panasonic

Panasonic PT-VZ580 Instrukcja

14 Września 2024

Instrukcje Projektor

Najnowsze instrukcje dla Projektor

Acer

Acer X1329 Instrukcja

15 Stycznia 2025
Acer

Acer P1165P Instrukcja

13 Stycznia 2025
Hitachi

Hitachi CP-X4011N Instrukcja

12 Stycznia 2025
NEC

NEC NC2043ML Instrukcja

12 Stycznia 2025
Viewsonic

Viewsonic V149-4K Instrukcja

11 Stycznia 2025
Acer

Acer AX600 Instrukcja

9 Stycznia 2025
Acer

Acer Q59X Instrukcja

9 Stycznia 2025