Instrukcja obsługi Panasonic NA1PK5PN

Panasonic nieskategoryzowany NA1PK5PN

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panasonic NA1PK5PN (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Slim Body
Excellent Mutual Interference Prevention Function
Selectable Detection Operation
Lighting Pattern Selectable
PNP Output Type Is Available
CE Marked
Clearly Visible Job Indicator Prevents Wrong Picking!
Clearly Visible Job Indicator Prevents Wrong Picking!
Suited for Miscellaneous
Object Picking Jobs!
Easy to Use and Clearly Visible!!
ULTRA-SLIM BODY AREA SENSOR
Suited for Miscellaneous
Object Picking Jobs!
Easy to Use and Clearly Visible!!
Wide-view bright job indicators which are clearly
visible from any direction, the front or the side of
the sensor, have been used.
Further, use of 8 orange LEDs contributes further
to clear visibility. Picking location can be easily
confirmed even in a brightly lit workplace.
Conforming to
EMC Directive
Clearly visible
from all directions!
Clearly visible
from all directions!
Flexible cable
orientation
Flexible cable
orientation
Slim Body
NA1-PK5 has an ultra-slim body, just 10mm thick. It fits into
a small space, without obstructing normal operation.
Excellent Mutual Interference Prevention Function
Mutual interference can be prevented by setting different
emission frequencies. This function allows the sensor to be
safety used in applications covering a wide area or for instal-
lation of several sensors in a row along parts shelves.
Selectable Detection Operation
Detection on interruption of either minimum one beam or
minimum two beams can be selected to suit the application.
Lighting Pattern Selectable
The job indicator operation can be selected as either contin-
uous lighting or blinking.
PNP Output Type Is Available
PNP output type NA1-PK5-PN which is widely used in
Europe is also available.
CE Marked
NA1-PK5 conforms to the EMC Directive.
Four bracket set
(Screws, nuts and hooks are attached.)
Two silver-color bracket set
(Screws and nuts are attached.)
Two black bracket set
(Screws and nuts are attached.)
MS-NA1-1
MS-NA2-1
MS-NA3
MS-NA3-BK
Sensing height
Sensing range (Note 1)
Beam pitch
Number of beam channels
Sensing object
Supply voltage
Power consumption
(Note 2)
Output
Utilization category
Output operation
Short-circuit protection
Response time
Emitter
Receiver
Interference prevention function
Pollution degree
Protection
Ambient temperature
Ambient humidity
EMC
Emitting element
Material
Cable
Cable extension
Weight
NPN output PNP output
NA1-PK5 NA1-PK5-PN
Type
Item
Model No.
Tr
100mA max.
E
D
ZD
Users’ circuitInternal circuit
Sensor circuit
Job indicator lighting/
blinking circuit
Load
(Brown)V
(Black) Output
(Note)
(Blue) 0V
(Pink) Input
Color code
12 to 24V DC
10%
m1
100mm
0.1 to 1.2m (0.05 to 0.5m when set to SHORT)
25mm
5 beam channels
"35mm or more opaque object
12 to 24V DC10% Ripple P-P 10% or less
Emitter: 0.5W or less
Receiver: 0.8W or less
DC-12 or DC-13
ON or OFF when one or more beams are interrupted/
ON or OFF when two or more beams are interrupted,
selectable by operation mode switch
Incorporated
10ms or less (when the interference prevention is used, in Light
state: 30ms or less, in Dark state: 13ms or less)
Power indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED lights up or blinks when the job indicator
input is Low, lighting pattern is selected by
operation mode switch
Operation indicator: Red LED lights up when one or more beams are interrupt-
ed, but lights up when two beams or more are
interrupted in the double-beam-interruption mode
Stable incident beam indicator: Green LED lights up when all beams
are stably received
Job indicator: Orange LED lights up or blinks when the job indicator
input is Low, lighting pattern is selected by
operation mode switch
Incorporated
3 (Industrial environment)
IP62 (IEC)
   10 to 55C (No dew condensation or icing allowed), Storage: 20 to 70C
35 to 85% RH, Storage: 35 to 85% RH
Emission: EN50081-2, Immunity: EN50082-2
Infrared LED (synchronized scanning system)
Enclosure: Heat-resistant ABS, Lens case: Acrylic, Indicator cover: Acrylic
0.3mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2m long
Extension up to total 100m is possible for both emitter and
receiver with 0.3mm
2, or more, cable.
Emitter: 80g approx., Receiver: 85g approx.
•This product is not intended or designed to protect life and prevent body injury or property
damage from dangerous parts of machinery. It is a normal object detection sensor.
•This product is not designed for use in safety applications.
ULTRA-SLIM BODY AREA SENSOR
SPECIFICATIONS
Emitter: 0.6W or less,
Receiver: 0.9W or less
NPN open-collector transistor
•Maximum sink current: 100mA
•Applied voltage:
30V DC or less
(between output and 0V)
•Residual voltage:
1V or less (at 100mA sink current)
0.4V or less (at 16mA sink current)
PNP open-collector transistor
•
Maximum source current: 100mA
•Applied voltage:
30V DC or less
(between output andV)
•Residual voltage:
1V or less (at 100mA source current)
0.4V or less (at 16mA source current)
Pioneer in Sensor Systems
SUNX Limited
2431-1 Ushiyama-cho, Kasugai-shi,
Aichi, 486-0901, Japan
Phone: +81-(0)568-33-7211
FAX: +81-(0)568-33-2631
Overseas Sales Dept.
Phone: +81-(0)568-33-7861
FAX: +81-(0)568-33-8591
Printed on 100% recycled paper
All information is subject to change without prior notice.
Internet home page
http://www.sunx.co.jp/
No. CE-NA1PK5-10 February, 2000PRINTED IN JAPAN
I/O CIRCUIT DIAGRAM
NA1-PK5 NPN output type
Note: The emitter is not incorporated with the output.
Symbols ... D: Reverse supply polarity protection diode
ZD: Surge absorption zener diode
Tr : NPN output transistor
E: Job indicator
m1
or
Non-contact voltage or
NPN open-collector transistor
Low (0 to 2V): Lights up or Blinks
High(5 to 30V, or open): Lights off
The illustration at the left shows
the receiver bracket.
The emitter bracket is shaped
symmetrically.
mFor PNP output type, please contact our office.
SENSING CHARACTERISTICS (TYPICAL)
Parallel deviation
L
Receiver
Emitter
?
•Vertical direction
Setting on
LONG
Setting on
SHORT
50100 0 50 100
Down UpCenter
Operating point ?(mm)
2
1.5
1
0.5
0
Setting distance L (m)
Vertical direction
Horizontal direction
L
Receiver
Emitter
?
Angular deviation
L
Receiver
Emitter
$
•Setting on LONG
Receiver
angular
deviation
Emitter
angular
deviation
1020 0 10 20
Left RightCenter
Operating angle $( )°
2
1.5
1
0.5
0
Setting distance L (m)
•Setting on SHORT
•Horizontal direction
1020 0 10 20
Left RightCenter
Operating angle $( ° )
2
1.5
1
0.5
0
Setting distance L (m)
Receiver
angular
deviation
Emitter
angular
deviation
Setting on
LONG
Setting on
SHORT
50100 0 50 100
Left RightCenter
Operating point ?(mm)
2
1.5
1
0.5
0
Setting distance L (m)
Emitter angular deviation
Receiver angular deviation
L
Receiver
Emitter
$
DIMENSIONS (Unit: mm)
10
15
25
25
25
25
30
18
5
130140
5
Beam Channel 2
Beam Channel 3
Beam Channel 4
Beam Channel 5
Beam Channel 1
Stable incident beam
indicator (Green)
"3.7 cable 2m long
Operation indicator (Red)
Job indicator (Orange)
Operation
mode switch
2-"4.6 supplementary
mounting holes 1.1 deep
(on both sides)
2-"4.5 mounting holes with
M4 nut seats 3.3 deep
(1.1 deep on back side)
Receiver
( )
( )
( )
( )
Notes: 1) The sensing range is the possible setting distance between the emitter and the
receiver. The sensor can detect an object less than 0.1m (0.05m when set to
SHORT) away.
Notes: 2) Obtain the current consumption by the following equation.
Current consumptionPower consumptionSupply voltage
(e.g.) When the supply voltage is 12V, the current consumption of the emitter is:
0.5W 0.042A12V c42mA.
OPTIONS
Designation Model No. Description
Sensor mounting
bracket
Sensor protection
bracket
Sensor mounting bracket Sensor protection bracket
• • •MS-NA1-1 MS-NA2-1 MS-NA3(-BK)
M
S-NA 2
Indicators

Specyfikacje produktu

Marka: Panasonic
Kategoria: nieskategoryzowany
Model: NA1PK5PN

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panasonic NA1PK5PN, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Panasonic

Panasonic

Panasonic VL-DM200BX Instrukcja

31 Sierpnia 2024
Panasonic

Panasonic FV-SCGPW1 Instrukcja

31 Sierpnia 2024
Panasonic

Panasonic VL-SDM200BX Instrukcja

31 Sierpnia 2024
Panasonic

Panasonic VL-SW251CX Instrukcja

31 Sierpnia 2024
Panasonic

Panasonic VL-SDM100BX Instrukcja

31 Sierpnia 2024
Panasonic

Panasonic NA-F75S7 Instrukcja

31 Sierpnia 2024
Panasonic

Panasonic DMW-LVF1E Instrukcja

31 Sierpnia 2024
Panasonic

Panasonic F-60DHN Instrukcja

31 Sierpnia 2024
Panasonic

Panasonic NC-EH40P Instrukcja

31 Sierpnia 2024
Panasonic

Panasonic NA-F65B7 Instrukcja

31 Sierpnia 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024