Instrukcja obsługi Ozito ZLRTS-012

Ozito Narzędzie wielofunkcyjne ZLRTS-012

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito ZLRTS-012 (8 stron) w kategorii Narzędzie wielofunkcyjne. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
ROTARY
TOOL
12V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input Voltage: 12V
No Load Speed: 10,000 - 22,000/min
Collet Chuck Size: ø 2.3 / 3.2mm
Flexible Shaft Length: 1.0m
Tool Weight: 0.45kg
ZLRTS-012
STANDARD EQUIPMENT
Cordless Rotary Tool
Flexible Shaft
Accessories x 84
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries and chargers
are covered by a 12 month warranty. Warranty excludes
consumable parts, for example: accessories, carbon brushes etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0620
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Collet Nut
2 Shaft Collar
3 Spindle Lock Button
4 On/O󰀨Button
5 Variable Speed Controls
6 Battery Seating
CORDLESS ROTARY TOOL
KNOW YOUR PRODUCT
1. CHANGING ACCESSORIES
7 Flexible Shaft
8 Locking Collet
9 Spindle Lock
10 Fitting Collar
11 Rotary Accessories x 81
12 Spanner
ACCESSORIES
BATTERY & CHARGER
SETUP & PREPARATION
1 2 3 4 5 6
7 8 9 10 1211
WARNING! ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING ANY
OF THE FOLLOWING OPERATIONS.
1 Press and hold the spindle
lock button.
2 Unscrew the collet nut and
remove completely.
3 Insert the collet into the
spindle and then cover
with the collet nut.
4 Lightly tighten the collet nut so
that it stays in place.
5 Insert shaft of accessory
into the collet.
Note: The supplied collet will
t3.2mmbitswhen
fully open. When fully
tightened it can reduce
to hold 2.3mm bits.
6 Tighten collet nut using spindle
lock and spanner.
This tool is compatible with all batteries and chargers from the
Ozito Home-12volt range.
2. CHANGING ACCESSORIES CONT. 3. FLEXIBLE SHAFT
Locating a cutting/sanding disc
Locating a sanding drum
2 Fitthebreangeeitherside
of the cutting disc, then insert
the screw.
1 Loosen the screw on the top
of the sanding drum holder.
3 Tighten the cutting disc onto
the cutting disc holder.
2 Slide the sanding drum onto
the sanding drum holder.
1 Remove the screw from
the end of the disc holder.
Note: Do not over-tighten the screw as it could result in damage to the
cutting disc.
3 Tighten the screw until
the sanding drum sleeve
is secured.
1 Remove the shaft collar.
6 Insert the spindle lock key into
the hole on the handle.
2 Loosen the collet nut.
7 Loosen collet nut then insert
shank of accessory into collet.
3 Raise the handle end of
theexibleshaft&shake
gently until the inner
exibleshaftprotrudes
fromthettingcollaror
use a pair of pliers.
5 Screwtheexibleshaft
ttingcollarontothe
rotary tool.
8 Tightencolletnutandcheckallttingstoensuretheyaresecurely
fastened.
4 Inserttheinnerexibleshaftintothecolletthentightenthecollet
nut.
a
b
ab

Specyfikacje produktu

Marka: Ozito
Kategoria: Narzędzie wielofunkcyjne
Model: ZLRTS-012

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito ZLRTS-012, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Narzędzie wielofunkcyjne Ozito

Ozito

Ozito PXPPHTK-258 Instrukcja

8 Października 2024
Ozito

Ozito PXGMTK-2536 Instrukcja

7 Października 2024
Ozito

Ozito PXMFTK-200 Instrukcja

15 Września 2024
Ozito

Ozito MFR-2200U Instrukcja

13 Września 2024
Ozito

Ozito PXCPPHTC-418U Instrukcja

6 Września 2024
Ozito

Ozito MFR-2200 Instrukcja

4 Września 2024
Ozito

Ozito PXMFTS-100 Instrukcja

4 Września 2024
Ozito

Ozito LRTK-036 Instrukcja

1 Września 2024
Ozito

Ozito RTR-040 Instrukcja

30 Sierpnia 2024
Ozito

Ozito RTR-4100 Instrukcja

17 Sierpnia 2024

Instrukcje Narzędzie wielofunkcyjne

Najnowsze instrukcje dla Narzędzie wielofunkcyjne

Black & Decker

Black & Decker MT18 Instrukcja

11 Stycznia 2025
Vonroc

Vonroc OT505DC Instrukcja

9 Stycznia 2025
Workzone

Workzone WZMS 10,8 Li Instrukcja

31 Grudnia 2025
Einhell

Einhell TE-MG 18/1 Li Instrukcja

30 Grudnia 2025
EGO

EGO MRC2306E Instrukcja

28 Grudnia 2024
Powerblade

Powerblade PC4MT5 Instrukcja

10 Grudnia 2024
EGO

EGO PH1420E Instrukcja

8 Grudnia 2024
Parkside

Parkside PAMFW 20-Li A1 Instrukcja

15 Października 2024
Güde

Güde GGF 620 Instrukcja

14 Października 2024
Makita

Makita DTM52Z Instrukcja

9 Października 2024