Instrukcja obsługi Ozito PXROS-125U

Ozito Sander PXROS-125U

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXROS-125U (3 stron) w kategorii Sander. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

SPECIFICATIONS

Input: 18V

No Load Speed: 7,000-11,000/min

Oscillatory Circuit: Ø2mm

Sanding Pad Size: 125mm

Grinding / Sanding Area: Ø125mm

Paper Fitment: Hook & Loop

Weight: 1.2kg

RANDOM

ORBITAL SANDER

ORIGINAL INSTRUCTIONS

PXROS-125U

Art.-No.: 30.002.85 I.-No.: 11017

ozito-diy.co.uk

WARRANTY

OZITO UK Champion’s Business Park, Unit 10, 1st Floor, Arrowe Brook Road, Upton, Wirral, Merseyside, CH49 0AB

All of our products undergo strict quality checks to ensure that they reach you in perfect

condition. In the unlikely event that your device develops a fault, please contact our service

department at the address shown on this guarantee card. You can also contact us by

telephone using the customer service number shown. Please note the following terms under

which guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the manufacturer

mentioned below promises to buyers of its new products in addition to their statutory

guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or manufacturing faults on

a product which you have bought from the manufacturer mentioned below are limited to

either the rectication of said defects on the product or the replacement of the product,

whichever we prefer.

Please note that our devices are not designed for use in commercial, trade or professional

applications. A guarantee contract will not be created if the device has been used by

commercial, trade or industrial business or has been exposed to similar stresses during the

guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly instructions or due to

incorrect installation, a failure to follow the operating instructions (for example connecting

it to an incorrect mains voltage or current type) or a failure to follow the maintenance and

safety instructions or by exposing the device to abnormal environmental conditions or by

lack of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example overloading the

device or the use or unapproved tools or accessories), ingress of foreign bodies into the

device (such as sand, stones or dust, transport damage), the use of force or damage caused

by external forces (for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural wear or tear or by

normal use of the device.

4. Your Product is guaranteed for a period of 60 months from the original date of purchase

and is intended for DIY (Do It Yourself) use only. Lithium Ion batteries and chargers are

covered by a 12 month warranty. Warranty excludes consumable parts. Guarantee claims

should be submitted before the end of the guarantee period within two weeks of the defect

being noticed. No guarantee claims will be accepted after the end of the guarantee period.

The original guarantee period remains applicable to the device even if repairs are carried

out or parts are replaced. In such cases, the work performed or parts tted will not result

in an extension of the guarantee period, and no new guarantee will become active for the

work performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO

THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT.

Please refer to the restrictions of this warranty concerning wearing parts, consumables and

missing parts as set out in the service information in these operating instructions.

CUSTOMER SERVICE HELPLINE

GB: 0151 294 4488

IRL: 1850 882711

Ozito-diy.co.uk

STANDARD EQUIPMENT

Random Orbital

Sander

Sandpaper x 1

Dust Bag

MAINTENANCE TROUBLESHOOTING

• Keep ventilation slots of the sander clean at all times to ensure efcient operation.

• After each use, blow air through the tool housing to ensure it is free from all dust, dirt, etc. Build

up of dust, dirt particles may cause the tool to overheat and shorten the life of the tool.

• If the housing of the sander requires cleaning, do not use solvents but a moist soft cloth or soft

brush only.

• Never let any liquid get inside the tool, never immerse any part of the tool into liquid.

• No lubrication is necessary as the tool has sealed bearings.

• When not in use, the sander should be stored in a dry, frost free location not within the reach of

children.

WARNING! ALWAYS ENSURE THE TOOL HAS

COMPLETELY STOPPED AND THE BATTERY IS

REMOVED PRIOR TO ANY MAINTENANCE.

Battery protection system

The tool is equipped with the battery protection system, which helps to ensure a long service

life.

The output power automatically cuts off during operation when the tool and/or battery are

placed under the following situations:

• When the tool is overloaded:

If this occurs, release the trigger switch and remove causes of overload, then pull the

switch trigger again to restart.

• When the remaining battery capacity becomes low:

Recharge the battery pack.

Note: The battery protection system does not in any way damage the tool.

Note: The indicated capacity may be lower than the actual level during use or immediately

after using the tool.

LED lights do not illuminate on charger

Check the charging adaptor is securely plugged into the wall out let.

Check the battery is rmly connected to the charging cradle.

Check that the charging jack is securely connected to the charging cradle.

Sparking visible through the housing air vents

A small amount of sparking may be visible through the housing vents. This is normal

and does not indicate a problem.

Sandpaper Selection

Selecting the correct grit of sandpaper is an important step in achieving optimum results. Coarse

grit will remove the most material. Finer grit will produce a smoother nish. The condition of the

workpiece will determine the grit of the sandpaper to be used. The higher the grit number, the ner

the grade of sandpaper.

If the surface is rough, start with a coarse grit and sand until the surface is uniform. Medium grit

may then be used to remove scratches left by the coarser grit. Finer grit is then used to nish the

surface. Always continue sanding with each grade of sandpaper until the surface is uniform.

MATERIAL APPROPRIATE GRIT

Coarse Sanding Fine Sanding

Paintwork 180 400

Wood: Softwood 60 240

Hardwood 60 180

Veneer 240 320

Note: If intermediate sanding is required, choose a grit rating between coarse and ne. The above

table is intended as a guide only. To ensure a satisfactory result, a small, inconspicuous area should

rst be tested to ensure the grit of sandpaper chosen is suitable for the desired nish.

RANDOM ORBITAL SANDER SAFETY WARNINGS

0318

SOUND & VIBRATION

Sound and vibration values were measured in accordance with EN 60745.

Lpa sound pressure level: 74.3 dB

Kpa uncertainty: 3 dB

Lwa

sound power level: 85.3 dB

Kwa uncertainty: 3 dB

Wear ear-muffs.

The impact of noise can cause damage to hearing.

Total vibration values (vector sum of three directions) determined in accordance with EN 60745.

Vibration emission value a h = 5.33 m/s2

K uncertainty = 1.5 m/s 2

Keep the noise emissions and vibrations to a minimum.

• Only use appliances which are in perfect working order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever necessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

SERVICE INFORMATION

Please note that the following parts of this product are subject to normal or natural

wear and that the following parts are therefore also required for use as consumables.

* Not necessarily included in the scope of delivery!

Category Example

Wear parts* Grinding/sanding plate, Battery

Consumables* Grinding/sanding paper

Missing parts

DESCRIPTION OF SYMBOLS

Danger! Read the operating instructions to reduce the risk of inquiry.

Caution! Wear ear-muffs. The impact of noise can cause

damage to hearing.

Caution! Wear a breathing mask. Dust which is injurious to

health can be generated when working on wood and other materials. Never

use the device to work on any materials containing asbestos!

Caution! Wear safety goggles. Sparks generated during

working or splinters, chips and dust emitted by the device can cause

loss of sight.

WARNING!

• This tool may only be used for dry grinding/ sanding operations.

• Use of the tool on materials containing asbestos is prohibited.

• Keep your workplace clean and well illuminated.

• Make sure that the workpiece is sufciently secured so that it cannot slip.

• Keep children away.

• For your own sake, keep the machine clean at all times and check it for signs of damage each time

after using it.

• Make sure that the switch is set to OFF before you insert the plug into the power supply socket.

• Make sure of your footing, particularly when working on ladders and platforms.

• Harmful or toxic dust can be produced when working on wood or metal.

Touching or inhaling this dust can be harmful for the operator and other persons nearby.

• Hold the equipment by the insulated handles because the grinding/sanding belt may strike the

equipment’s own power cable. Damaging a live cable may make the metal parts of the equipment live

and cause an electric shock.

• Important! Wear safety goggles and a dust mask.

Children should be supervised to ensure that they do not play with the appliance.

Do not lose these safety instructions.

SPARE PARTS

Spare parts can be ordered from the Special Orders Desk at your local

Bunnings Warehouse or Homebase store.

For further information, or any parts visit

www.ozito-diy.co.uk or contact Ozito Customer Service:

Great Britain: 0151 294 4488

Ireland: 1850 882711

E-mail: info@ozito-diy.co.uk

For EU countries only

Never place any electric power tools in your household refuse.

To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and its

implementation in national laws, old electric power tools have to be separated from other waste and

disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to the manufacturer, the owner of the electrical

equipment must make sure that the equipment is properly disposed of if p1-he no longer wants to keep

the equipment. The old equipment can be returned to a suitable collection point that will dispose of

the equipment in accordance with the national recycling and waste disposal regulations. This does not

apply to any accessories or aids without electrical components supplied with the old equipment.

The reprinting or reproduction by any other means, in whole or in part, of documentation and papers

accompanying products is permitted only with the express consent of the iSC GmbH.

Subject to technical changes

GENERAL POWER TOOL SAFETY WARNINGS

DECLARATION OF CONFORMITY

Yang/Product-ManagementWeichselgartner/General-Manager

explains the following conformity according to EU directives and norms for

the following product

Cordless Random Orbital Sander PXROS-125U (Ozito)

2014/29/EU

2005/32/EC_2009/125/EC

2014/35/EU

2006/28/EC

X 2014/30/EU

2014/32/EU

2014/53/EC

2014/68/EU

90/396/EC_2009/142/EC

89/686/EC_96/58/EC

X 2011/65/EU

X 2006/42/EC

Annex IV

Noti ed Body:

Noti ed Body No.:

Reg. No.:

2000/14/EC_2005/88/EC

Annex V

Annex VI

Noise: measured LWA = dB (A); guaranteed LWA = dB (A)

P = KW; L/Ø = cm

Noti ed Body:

2012/46/EU

Emission No.:

Standard references: EN 62841-1; EN 62841-2-4; EN 55014-1; EN 55014-2

Landau/Isar, den 21.03.2018

First CE: 18 Archive-File/Record: NAPR018290

Art.-No.: 30.002.85 I.-No.: 11017 Alex KurzDocuments registrar:

Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar

ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar

DANGER! Read all safety regulations and instructions. Any errors made in following the safety

regulations and instructions may result in an electric shock, re and/or serious injury.

Keep all safety regulations and instructions in a safe place for future use. The term “electric tool” used

in the safety instructions refers to electric tools operated from the mains power supply (with a power cable) and to battery operated

electric tools (without a power cable).

1. Workplace safety

a) Keep your work area clean and well illuminated. Untidy or unlit work areas can result in accidents.

b) Do not operate the electric tool in an environment where there is a risk of explosions and

where there are inﬂammable liquids, gases or dust. Electric tools produce sparks which could set the dust or

vapours alight.

c) Keep the electric tool out of the reach of children and other persons. If there is a distraction, you may

lose control of the appliance.

2. Electrical safety

a) The connector plug from this electric tool must ﬁt into the socket. The plug should never be

altered in any way. Never use adapter plugs together with earthed electric tools. Unaltered plugs and

correct sockets reduce the risk of an electric shock.

b) Avoid bodily contact with earthed surfaces such as pipes, heating, ovens and fridges. The risk of

electric shock is increased if your body is earthed.

c) Keep the tool out of the rain and away from moisture. The ingress of water into an electric tool increases the

risk of an electric shock.

d) Do not use the cable to carry the electric tool, to hang it up or to pull it out of the socket.

Keep the cable away from heat, oil, sharp edges and moving parts of the appliance. Damaged or

entangled cables increase the risk of an electric shock.

e) If you are working outdoors with an electric tool, only use extension cables which are designed

speciﬁcally for this purpose. Using specially designed outdoor extension cables, the risk of electric shock is reduced.

f) If operation of the electric tool in a damp environment can not be avoided, use a earth-leakage

circuit-breaker. The earthleakage circuit-breaker reduces the risk of an electric shock.

3. Safety of persons

a) Be careful, watch what you are doing and use an electric tool sensibly. Do not use the tool if

you are tired or under the inﬂuence of drugs, alcohol or medication. A moment of inattention when using the

electric tool can result in serious injuries.

b) Wear personal protection equipment and always wear safety goggles. Wearing personal protection

(such as dust masks, non-slip safety shoes, safety helmet or ear protection, depending upon the type and use of the electric tool)

reduces the risk of injury.

c) up accidentally. Ensure that the electric tool is switched off Make sure that the appliance cannot start

before you connect it to the power supply and/or insert the battery, or pick up or carry the tool.

If your nger is on the switch whilst carrying the electric tool or if you connect the appliance to the mains when it is switched on, this

can lead to accidents.

d) Remove keys and wrenches before switching on the electric tool. A tool or key which comes into contact

with rotating parts of the appliance can lead to injuries.

e) Avoid abnormal working postures. Make sure you stand squarely and keep your balance at all

times. In this way, you can control the electric tool better in unexpected circumstances.

f) Wear suitable work clothes. Do not wear loose clothing or jewellery. Keep hair, clothes and

gloves away from moving parts. Loose clothing, jewellery or long hair can get trapped in moving parts.

g) If vacuuming devices and draining devices can be ﬁtted, make sure that these are correctly

attached and correctly used. The use of a dust extraction system can reduce the danger posed by dust.

4. Usage and treatment of the electric tool

a) Do not overload the appliance. Use the correct tool for your work. You will be able to work better and

more safely within the given performance boundaries.

b) Do not use an electric tool with a defective switch. An electric tool that cannot be switched on or off is

dangerous and must be repaired.

c) Pull the plug out of the socket and/or remove the battery before making any adjustments to

the appliance, changing accessories or put the appliance down. This safety measure prevents starting the

electric tool unintentionally.

d) Keep unused electric tools out of the reach of children. Do not allow people who are not

familiar with the appliance or who have not read these instructions to use the appliance. Electric

tools are dangerous if they are used by inexperienced people.

e) Clean your electric tool carefully. Check whether moving parts are functioning properly and not

jamming, whether parts are broken or damaged enough that the functioning of this electric tool

is affected. Have damaged parts repaired before using the appliance. Many accidents are caused by badly

maintained electric tools.

f) Keep your cutting tools sharp and clean. Carefully maintained cutting tools with sharp cutting edges will jam less

and are easier to control.

g) Make sure to use electric tools, accessories, attachments, etc. in accordance with these

instructions. Take the conditions in your work area and the job in hand into account. Using electric

tools for any purpose other than the one for which they are intended can lead to dangerous situations.

5. Using and handling the cordless tool

a) Only charge the batteries in chargers that are recommended by the manufacturer. A charger that

is designed for a certain type of battery may pose a  re risk if it is used with other types of battery.

b) Use only the correct batteries in the electric tools. The use of other batteries may result in injuries and a re

risk.

c) Keep unused batteries away from paper clips, coins, keys, nails, screws and other metallic

objects that could cause a short circuit between the contacts. A short circuit between the battery contacts

may cause burns or a  re.

d) In case of incorrect use, ﬂuid may escape from the battery. Avoid contact with it. If you touch

it by accident, rinse the affected area with water. If you get the ﬂuid in your eyes, also seek

medical advice. Leaking battery uid can cause skin irritation or burns.

6. Service

a) Have your electric tool repaired only by trained personnel using only genuine spare parts. This will

ensure that your electric tool remains safe to use.

Additional safety instructions We pay a great deal of attention to the design of every battery pack to ensure that we supply

you with batteries which feature maximum power density, durability and safety. The battery cells have a wide range of safety devices.

Each individual cell is initially formatted and its electrical characteristic curves are recorded. These data are then used exclusively

to be able to assemble the best possible battery packs. Despite all the safety precautions, caution must always

be exercised when handling batteries. The following points must be obeyed at all times to ensure

safe use. Safe use can only be guaranteed if undamaged cells are used. Incorrect handling can

cause cell damage.

Important: Analyses conrm that incorrect use and poor care are the main causes of the damage caused by high performance

batteries.

ELECTRICAL SAFETY

WARNING! When using mains-powered tools, basic safety precautions, including the

following, should always be followed to reduce risk of ﬁre, electric shock, personal injury

and material damage.

Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool.

Save these instructions and other documents supplied with this tool for future reference.

Before you connect the charger to the mains supply make sure that the data on the rating plate are identical to the mains data.

This tools charger is double insulated; therefore no earth wire is required.

If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.

Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for

added protection against injury resulting from a possible electrical insulation failure within the tool.

The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current

device reduces the risk of electric shock.

Double insulated

PXROS-125U

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to the

online manual.

BATTERY & CHARGER

This tool is compatible with all batteries and chargers from the Ozito

Power X Change Range.

4. CONTROLS

1 To start the sander press

the on/off switch into

the on position “I”.

Switching On and Off

Variable Speed Dial

2 To stop operation, press

the on/off switch into

the off position “0”.

2 To decrease the rotation speed

of the tool, rotate the dial to a

lower number.

1 To increase the rotation speed

of the tool, rotate the dial to a

higher number.

1 Position the sander over

a dust bin and remove

the dust bag.

The dust bag should be emptied when it becomes 1/3 full for optimum dust

extraction.

Emptying the Dust Bag

2 Empty the dust bag into a bin

and then ret the dust bag onto

the dust extraction adaptor.

3. BATTERY & DUST BAG

Inserting the Battery

Removing the Battery

1 Slide the grooves of the battery

into the recess at the back of the

tool, until it clicks into place.

1 Press and hold the battery

release tab.

2 Slide the battery out of the tool

to remove.

5. SANDING 6. SANDING TIPS

KNOW YOUR PRODUCT

2. ASSEMBLY

1. BEFORE USE

SETUP & PREPARATION

1 Align the opening of the dust bag

with the dust extraction adaptor

and push on.

1 Align the sandpaper with the pad and press on.

2 Replace the sandpaper once it is worn.

2 To remove, simply pull

the dust bag away from

the sander.

Attaching the Sandpaper

Fitting and Removing the Dust Bag

WARNING! ENSURE THE TOOL IS SWITCHED OFF AND

DISCONNECTED FROM THE POWER SUPPLY BEFORE

PERFORMING ANY OF THE FOLLOWING TASKS.

OPERATION

CORDLESS RANDOM ORBITAL SANDER

1 2 3 4 5 6

1 Dust Sealed On/Off Switch

2 Sure Grip Handle

3 Variable Speed Dial

4 Battery Seating

5 Hook & Loop Sanding Pad

6 Dust Bag

ACCESSORIES

7 Sandpaper (80grit)

Side to SideBackward/ Forward

1 Secure the material to be

sanding where possible.

3 Gradually lower the sander onto the workpiece with a slight forward

movement.

2 With a rm grip on the sander, switch the sander on.

4 For optimum results, use either of these strokes.

Never force the sander. The weight of the sander supplies adequate pressure,

allowing the sandpaper to do the work. Applying additional pressure will slow

the motor, rapidly wear the sandpaper, and greatly reduce the sander speed.

This will slow the removal rate and produce an inferior quality surface.

CAUTION: Excessive pressure will overload the motor, causing possible

damage to the sander by overheating the motor; or damage to the workpiece.

Be sure to check your workpiece often. The sander is capable of removing

material rapidly, especially with coarse paper.

The random orbital action of your sander allows you to sand with the grain, or

at any angle across it for most sanding jobs. In the nal stages a better nish

will be achieved by sanding with the grain.

Do not sand on one spot for too long. The sander’s rapid action may remove

too much material, creating an uneven surface.

CAUTION: DO NOT USE FOR SANDING PLASTER AS

THIS WILL VOID THE WARRANTY.

Items Supplied

Please check that the article is complete as specied in the scope of delivery. If parts

are missing, please contact our service center or the sales outlet where you made

your purchase at the latest within 5 working days after purchasing the product and

upon presentation of a valid bill of purchase. Also, refer to the warranty table in the

service information at the end of the operating instructions.

• Open the packaging and take out the equipment with care.

• Remove the packaging material and any packaging and/or transportation braces (if

available).

• Check to see if all items are supplied.

• Inspect the equipment and accessories for transport damage.

• If possible, please keep the packaging until the end of the guarantee period.

Danger!

The equipment and packaging material are not toys. Do not let

children play with plastic bags, foils or small parts. There is a

danger of swallowing or suffocating!

Proper Use

The equipment is designed for the grinding/san ding of wood, iron, plastic and similar

materials using the appropriate grinding/sanding paper. The machine is not suitable

for wet grinding/sanding.

The equipment is to be used only for its prescribed purpose. Any other use is deemed

to be a case of misuse. The user / operator and not the manufacturer will be liable

for any damage or injuries of any kind caused as a result of this.

Please note that our equipment has not been designed for use in commercial, trade

or industrial applications. Our warranty will be voided if the machine is used in

commercial, trade or industrial businesses or for equivalent purposes.

Caution!

Residual risks

Even if you use this electric power tool in accordance with

instructions, certain residual risks cannot be rules out.

The following hazards may arise in connection with the

equipment’s construction and layout:

1. Lung damage if no suitable protective dust mask is used.

2. Damage to hearing if no suitable ear protection is used.

3. Health damage caused by hand-arm vibrations if the equipment is used over a

prolonged period or is not properly guided and maintained.

Specyfikacje produktu

Marka:	Ozito
Kategoria:	Sander
Model:	PXROS-125U

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXROS-125U, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Sander Ozito

Ozito DSR-3000 Instrukcja

4 Października 2024

Ozito PXMSS-700U Instrukcja

3 Października 2024

Ozito ROS-4000 Instrukcja

3 Października 2024

Ozito TSS-3100U Instrukcja

18 Września 2024

Ozito HSS-5000U Instrukcja

16 Września 2024

Ozito QSS-1000U Instrukcja

16 Września 2024

Ozito ROS-2000U Instrukcja

15 Września 2024

Ozito ROS-4000U Instrukcja

15 Września 2024

Ozito DSR-2500U Instrukcja

14 Września 2024

Ozito MSK-001U Instrukcja

14 Września 2024

Instrukcje Sander

Najnowsze instrukcje dla Sander

Max 45505 Instrukcja

14 Października 2024

Gamma IB-350W Instrukcja

9 Października 2024

Gamma HPS-200W Instrukcja

9 Października 2024

Hazet 9032 MK Instrukcja

9 Października 2024

Arendo 307018 Instrukcja

9 Października 2024

Einhell TE-BF 18 Li Instrukcja

9 Października 2024

Skil 7280 DA Instrukcja

7 Października 2024

RIKON 50-1428 Instrukcja

7 Października 2024

Stalco ESS125 Instrukcja

7 Października 2024

Einhell E-VS 280 Instrukcja

7 Października 2024