Instrukcja obsługi Ozito PXMFTS-018

Ozito Niesklasyfikowane PXMFTS-018

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXMFTS-018 (14 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
STANDARD EQUIPMENT
WOOD METAL
PXMFTS-018
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V DC
No Load Speed: 11,000 - 20,000/min
Orbit Angle: 3.2°
Sanding Pad Size: 90 x 90 x 90mm
Sandpaper Size: 93 x 93 x 93mm
Fitment Type: Starlock Style
Weight: 1.18kg
ozito.com.au
0921
Cordless Multi Function Tool
Wood Plunge Blade, Metal
Plunge Blade, Scraper &
Accessory Adaptor
Sanding Pad, 3 x 60grit, 3 x
80grit & 3 x 120grit Sandpaper
MULTI
FUNCTION TOOL
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
WOOD METAL
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button and then slide the battery
out.
Vibration Absorption
To absorb the vibrations which arise
on the rechargeable battery, there
is some play between the battery
and the tool’s battery seating. This
is normal and has no effect on the
performance of the equipment or
the rechargeable battery.
Note: Wear protective gloves to
keep the vibrations to a minimum.
1. Accessory Locking Lever
2. On/Off Switch
3. Variable Speed Dial
4. Battery Seating
5. Accessory Drive Spindle
6. Sure Grip Handle
7. Sanding Pad
8. Sanding Paper
(3 x 60grit, 3 x 80grit, 3 x 120grit)
9. Wood Plunge Blade
10. Metal Plunge Blade
11. Scraper
12. Accessory Adaptor
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
CORDLESS MULTI FUNCTION TOOL
ACCESSORIES
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
SETUP & PREPARATION
ab
1 2 3 4
65
7 9 10 11 128
Turning On & Off
1. To start the tool press the on/
off switch forward into the on
position.
2. To stop the tool press the on/
off switch backward into the off
position.
WARNING! AFTER USE, HOLD THE TOOL AWAY
FROM YOUR BODY UNTIL THE SPINDLE STOPS
COMPLETELY.
Note: Hold the tool by the sure
grip handle. Your non-dominant
hand can also be used to steady
the tool on the by holding over the
accessory locking handle.
Variable Speed Control
1. To increase the speed of the tool, rotate
the variable speed dial to a higher
number.
2. To decrease the speed of the tool, rotate
the variable speed dial to a lower number.
2. ATTACHING ACCESSORIES 3. CONTROLS
OPERATION
Attaching Accessories
1. Rotate the accessory locking lever anti-
clockwise to open spindle tment.
2. Place the desired accessory
onto the accessory drive spindle
ensuring the holes in the
accessory align with the notches
on the tool.
3. When using other non-Ozito multi function tool
compatible accessories, the accessory adapter
may need to be tted to secure correctly.
4. Rotate the accessory locking
lever clockwise to secure the
accessory.
Note: Pull on the accessory to
check if it is secured correctly.
WARNING! KEEP FINGERS CLEAR OF SPINDLE
WHEN SECURING THE ACCESSORY TO AVOID
PINCHING.
Removing Accessories
1. To remove the accessory rotate
the locking lever anti-clockwise
and then remove from the
spindle.
10° - 15°
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! THIS PRODUCT IS NOT RECOMMENDED
FOR SANDING DRYWALL OR PLASTER DUE TO
THE ULTRA-FINE SANDING PARTICLES PRODUCED.
DRYWALL SANDERS IN CONJUNCTION WITH DUST
EXTRACTION ARE RECOMMENDED FOR DRYWALL
AND PLASTER SANDING APPLICATIONS.
WARNING! ALWAYS WEAR GLOVES WHEN
HANDLING THE CUTTING ACCESSORY AS IT IS VERY
SHARP.

Specyfikacje produktu

Marka: Ozito
Kategoria: Niesklasyfikowane
Model: PXMFTS-018

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXMFTS-018, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Ozito

Ozito

Ozito PXBSPS-180 Instrukcja

6 Października 2024
Ozito

Ozito SSH-240 Instrukcja

6 Października 2024
Ozito

Ozito PXPPS-1820 Instrukcja

4 Października 2024
Ozito

Ozito PXNGS-218 Instrukcja

4 Października 2024
Ozito

Ozito PSR-5732U Instrukcja

3 Października 2024
Ozito

Ozito PXCLMLTC-418U Instrukcja

3 Października 2024
Ozito

Ozito PXDDK-301U Instrukcja

3 Października 2024
Ozito

Ozito WPHGK-2000U Instrukcja

3 Października 2024
Ozito

Ozito PXDDGK-600U Instrukcja

3 Października 2024
Ozito

Ozito PXCBLLTC-418U Instrukcja

3 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024