Instrukcja obsługi Ozito PXHVIS-018

Ozito Niet gecategoriseerd PXHVIS-018

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXHVIS-018 (6 stron) w kategorii Niet gecategoriseerd. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
STANDARD EQUIPMENT
PXHVIS-018
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Power: 60W
Max. Flow Rate: 460L/min
Weight: 0.34kg
ozito.com.au
0820
Cordless High Volume Inator
2 x Ination Adaptors
CORDLESS
HIGH VOLUME
AIR INFLATOR
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button and then slide the battery
out.
1. Ination Port
2. LED Worklight
3. On/Off Trigger
4. Deation Port
5. Sure Grip Handle
6. Lanyard
7. Battery Seating
8. Ination Adaptors
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
CORDLESS HIGH VOLUME AIR INFLATOR
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
SETUP & PREPARATION
a.
b.
1 42 3
7 6
5
8
Attaching The Inflation Adaptors
A concentrator nozzle and narrow nozzle adaptor have been provided to suit
a variety of inatables.
1. Align the slot on the adaptor with
the tab on the ination port of
the tool.
2. Push the adaptor onto the ination port.
3. Turn the adaptor anti-clockwise
to lock it in place.
4. The narrow nozzle can then be pushed
onto the adaptor if it is required.
Removing The Inflation Adaptor
1. Twist the ination adaptor
clockwise to unlock it and then
pull it off the tool.
2. FITTING THE ADAPTORS 3. CONTROLS
OPERATION
a.
b.
Turning The Tool On/Off
1. Press the on/off trigger once to
start the tool.
Note: The tool will automatically
lock-on and continue inating even
if you let go of the trigger.
2. Press the on/off trigger again to stop the tool.
LED Worklight
The worklight automatically lights up when
the tool is started to help you see in low
light conditions (such as during camping).
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.

Specyfikacje produktu

Marka: Ozito
Kategoria: Niet gecategoriseerd
Model: PXHVIS-018

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXHVIS-018, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niet gecategoriseerd Ozito

Ozito

Ozito PXJBS-0182 Instrukcja

14 Września 2024
Ozito

Ozito PXCTS-0182U Instrukcja

13 Września 2024
Ozito

Ozito PXHVIS-018 Instrukcja

13 Września 2024
Ozito

Ozito PXBC-004U Instrukcja

10 Września 2024
Ozito

Ozito PXBLTS-018 Instrukcja

10 Września 2024
Ozito

Ozito GGK-030 Instrukcja

5 Września 2024
Ozito

Ozito RSH-100 Instrukcja

3 Września 2024
Ozito

Ozito AAHR-090 Instrukcja

30 Sierpnia 2024
Ozito

Ozito OJS-800 Instrukcja

27 Sierpnia 2024
Ozito

Ozito PXBVK-4182 Instrukcja

26 Sierpnia 2024

Instrukcje Niet gecategoriseerd

Najnowsze instrukcje dla Niet gecategoriseerd

Microchip

Microchip MCP6L2 Instrukcja

20 Września 2024
Samsung

Samsung HG32EJ690WE Instrukcja

20 Września 2024
Samsung

Samsung AR18JQSDBWK Instrukcja

20 Września 2024
Crestron

Crestron TPMC-4SMD-W-S Instrukcja

20 Września 2024
Digi

Digi WVA-J200 Instrukcja

20 Września 2024
HQ Power

HQ Power VDL50MB2 Instrukcja

20 Września 2024
Toolit

Toolit DBT 300 Instrukcja

20 Września 2024
Microchip

Microchip PIC32MX550F256H Instrukcja

20 Września 2024
Crestron

Crestron USB-EXT-DM-LOCAL Instrukcja

20 Września 2024
Aputure

Aputure LS 600X Pro Instrukcja

20 Września 2024