Instrukcja obsługi Ozito PXHDIS-240

Ozito Niet gecategoriseerd PXHDIS-240

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXHDIS-240 (8 stron) w kategorii Niet gecategoriseerd. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

SPECIFICATIONS

Input: 18V (DC) or 230-240V (AC)

No Load Speed: 16,000/min

Max Pressure: 160PSI (11Bar)

Flow Rate: 10L/min @ 30PSI

Weight: 2.2kg

HYBRID

INFLATOR /

DEFLATOR

INSTRUCTION MANUAL

ozito.com.au

WHAT’S IN THE BOX

Hybrid Inﬂator /

Deﬂator

High Volume Air Hose

3 x Inﬂation Adapters

Battery & Charger

sold separately

PXHDIS-240

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

0517

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts, for example: crevice tool.

MODE

The purchased battery will be shipped in a low charge condition, and requires charging

prior to use. Allow several cycles of charging and discharging (through use of the tool)

for the battery to reach its optimum performance / runtime.

1 Connect the charger into a mains power outlet.

4 The charger LED will illuminate

red signifying that the battery is

charging.

3 With the charger sitting on a at

surface, align the raised ribs on

the battery with the recess in the

charger and slide onto the charger

ensuring a rm connection.

2 The charger LED will ash green

showing power is being supplied

to the charger.

5 The charger LED will illuminate

green once the battery is fully

charged.

Charging your lithium ion battery - Fast Charger

Charger LED Indicator

LED Indicator Situation

GREEN (Flashing) Stand By (no battery pack is inserted)

RED (Flashing) Battery is charging (low charge)

RED (Illuminated) Battery is charging (mid charge)

GREEN (Illuminated) Battery is fully charged

BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin

automatically when battery reaches correct charging

temperature).

BOTH (Flashing) Defective battery. Never charge a defective battery

pack!

Remove battery pack from charger.

1. BATTERY & CHARGING (sold separately)

KNOW YOUR PRODUCT SETUP & PREPARATION

HYBRID INFLATOR / DEFLATOR

ACCESSORIES

1 2 3 4

9 10 11

5 6 7 8

1 Adapter Compartment

2 Power Mode Switch

3 Pressure Selection Buttons

4 Battery Seating

5 Operation Mode Switch

6 Carry Handle

7 Power Cord Compartment

8 High Volume Air Hose

9 Presta Adapter

10 General Purpose Adapter

11 Ball Adapter

CAUTION: THE CHARGER FOR THIS PRODUCT

SHOULD BE PROTECTED BY A RESIDUAL CURRENT

DEVICE (RATED AT 30mA OR LESS).

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to the

online manual.

BATTERY & CHARGER (sold separately)

This tool is compatible with all batteries and chargers from the Ozito

Power X Change Range.

2. CONNECTING TO POWER

Battery Charge Indicator

The purchased battery is equipped with a

battery charge indicator to show the state of

the battery charge.

Press the charge indicator button and look to

see which LED lights.

Battery requires

immediate charging

Low state of charge, requires charging soon.

Mid state of charge

Full state of charge.

Note: The battery needs to be removed from the tool to check the state of charge.

1 Connect the charger into a mains power outlet.

4 The charger LED will illuminate red signifying that the battery is charging.

3 With the battery sitting on a at

surface, align the raised ribs on the

battery with the recess in the charger

and slide onto the battery ensuring a

rm connection.

2 The charger LED will ash green

showing power is being supplied

to the charger.

5 When removing the charger from the

battery, rst press the battery release

tab, then slide the charger from its

position.

Charging your lithium ion battery - Eco Charger

Charger LED Indicator

LED Indicator Situation

GREEN (Flashing) Stand By (no battery pack is inserted)

RED (Illuminated) Battery is charging (low charge)

GREEN (Illuminated) Battery is fully charged

RED (Flashing) Battery or Charger fault

RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from

charger and store at room temperature 20ºC. Insert

battery again when at correct charging temperature). If

this happens again, the battery is defective and needs

to be replaced. Connecting to a 240V (AC) Outlet

Inserting & Removing the Battery (not included)

2 To switch the unit on, press the

power mode switch into the DC

position.

3 To remove, press and hold the

battery release tab and pull

the battery away from the

tool.

2 To switch the unit on, press the

power mode switch into the

AC position.

1 Align the ribs of the battery

with the recess at the front

of the unit and push in until it

clicks into place.

1 Remove the power cord from

the compartment at the base

of the inator and connect to a

240V outlet.

MODE

WARNING! THE 240V POWER SUPPLY SHOULD BE

PROTECTED BY A RESIDUAL CURRENT DEVICE (RATED

AT 30MA OR LESS).

WARNING! BEFORE CONNECTING TO A POWER

SUPPLY, ENSURE THE OPERATING MODE SWITCH IS IN

THE OFF POSITION “0”.

Specyfikacje produktu

Marka:	Ozito
Kategoria:	Niet gecategoriseerd
Model:	PXHDIS-240
Kolor produktu:	Biały
Liczba źródeł światła:	2 szt.
Rodzaj żarówki:	Halogen
Wysokość produktu:	830 mm
Szerokość produktu:	898 mm
Waga produktu:	28000 g
W zestawie pilot zdalnego sterowania:	Tak
Poziom hałasu:	72 dB
Lampy:	20 W
Model:	Naścienny
Maksymalna moc ekstrakcji:	640 m³/h
Rodzaj ekstrakcji:	Kanałowy
Rodzaj filtra tłuszczu:	Stal nierdzewna
Zdjemowalny filtr:	Tak
Wysokość (min):	1015 mm
Wysokość (max.):	705 mm
Ilość silników:	1
Minimalna odległość od płyty gazowej:	650 mm
Minimalna odległość od płyty elektrycznej:	450 mm
Średnica przyłącza odprowadzającego dym:	150 mm
Lokalizacja wydechu:	Górne
Wbudowana wydajność:	Tak