Instrukcja obsługi Ozito PX5PAK-005

Ozito szlifierka PX5PAK-005

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PX5PAK-005 (34 stron) w kategorii szlifierka. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/34

SPECIFICATIONS

Voltage: 18V

No Load Speed: 8500/min

Disc Diameter: 115mm (41/2”)

Spindle: M14

Charge Time: 40mins (2.0Ah)

80mins (4.0Ah)

Weight: 1.8kg

CORDLESS

ANGLE GRINDER

INSTRUCTION MANUAL

ozito.com.au

PX5PAK-005

Cordless Drill Driver

& Impact Driver

Cordless Angle Grinder

Cordless Circular Saw

& LED Torch

2.0Ah, 4.0Ah Battery & Fast

Charger

WHAT’S IN THE BOX

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU

MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS

WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL

NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER

SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE

WARRANTY POLICY OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benets provided under this warranty are in addition to other rights and

remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to

a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality and the failure

does not amount to a major failure.

Generally you will be responsible for all costs associated with a claim under this

warranty, however, where you have suffered any additional direct loss as a result of

a defective product you may be able to claim such expenses by contacting our

customer service helpline above.

0317

WARNING

The following actions will result in the warranty being

void.

• If the tool has been operated on a supply voltage other than that specied

on the tool.

• If the tool shows signs of damage or defects caused by or resulting from

abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction manual.

• If the tool is disassembled or tampered with in any way.

5 YEAR REPLACEMENT WARRANTY

Your Product is guaranteed for a period of 60 months from the original date of

purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it

will be replaced in accordance with the terms of this warranty. Lithium Ion

batteries and chargers are covered by a 36 month

warranty and are excluded from the warranty extension. Warranty excludes

consumable parts.

KNOW YOUR PRODUCT SETUP & PREPARATION

1. ASSEMBLY

CORDLESS ANGLE GRINDER (PXAGS-500)

1 2 3 4 5 6

1 Spindle Lock

2 Guard Locking Lever

3 Side Handle

4 Lock On Slide Switch

5 Sure Grip Handle

6 Battery Seating

7 Pin Wrech

Inserting & Removing the Battery

1 Align the ribs of the battery with

the recess at the back of the

angle grinder & push in until it

clicks into place.

2 To remove, press and hold the

battery release tab and then

slide out.

1 Loosen the safety guard locking

lever to allow it to spin.

1 To t, screw the side handle

clockwise into 1 of 3 handle

positions.

2 Rotate the guard into the desired

position & secure in place with

the locking lever.

2 To remove, screw the handle

anti-clockwise.

Fitting and Removing the Side Handle

Adjusting the Safety Guard

WARNING! ENSURE THE TOOL IS SWITCHED OFF AND

THE BATTERY IS REMOVED BEFORE PERFORMING ANY

OF THE FOLLOWING TASKS.

WARNING! DO NOT OPERATE THE ANGLE GRINDER

WITHOUT THE SAFETY GUARD FITTED AS POSSIBLE

INJURIES COULD OCCUR.

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to the

online manual.

8 2.0Ah Battery

9 4.0Ah Battery

10 Fast Charger

BATTERY & CHARGER

8 9 10

CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD

BE PROTECTED BY A RESIDUAL CURRENT DEVICE

(RATED AT 30MA OR LESS).

1 Connect the charger into a mains power outlet.

4 The charger LED will illuminate

red signifying that the battery is

charging.

3 With the charger sitting on a at

surface, align the raised ribs on

the battery with the recess in the

charger and slide onto the charger

ensuring a rm connection.

2 The charger LED will ash green

showing power is being supplied

to the charger.

5 The charger LED will illuminate

green once the battery is fully

charged.

Charging your lithium ion battery - Fast Charger

Charger LED Indicator

LED Indicator Situation

GREEN (Flashing) Stand By (no battery pack is inserted)

RED (Flashing) Battery is charging (low charge)

RED (Illuminated) Battery is charging (mid charge)

GREEN (Illuminated) Battery is fully charged

BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin

automatically when battery reaches correct charging

temperature).

BOTH (Flashing) Defective battery. Never charge a defective battery

pack!

Remove battery pack from charger.

3. BATTERY & CHARGING2. REPLACING A GRINDING DISC

2 Using the pin wrech loosen

the ange by rotating it anti

-clockwise.

4 Screw the ange back onto the spindle and tighten using the pin wrech

while holding the spindle lock down.

1 Depress and hold the

spindle lock to prevent

the spindle spinning.

3 Remove the ange and

replace the grinding disc

on the spindle.

Specyfikacje produktu

Marka:	Ozito
Kategoria:	szlifierka
Model:	PX5PAK-005
Kolor produktu:	Biały
Wbudowany wyłącznik:	Tak
Szerokość opakowania:	845 mm
Wysokość opakowania:	544 mm
Głębokość opakowania:	156 mm
Bluetooth:	Nie
Wbudowane głośniki:	Tak
Ilość głośników:	2
Moc wyjściowa (RMS):	20 W
Wyjścia słuchawkowe:	1
Typ HD:	Full HD
Długość przekątnej ekranu:	32 "
Klasa efektywności energetycznej (stara):	B
Rozdzielczość:	1920 x 1080 px
Współczynnik kontrastu (typowy):	6000:1
Natywne proporcje obrazu:	16:9
Wi-Fi:	Nie
Obsługiwane formaty audio:	MP3
Obsługiwane formaty plików wideo:	MPEG4,XVID
Pobór mocy w trybie czuwania:	1 W
Liczba portów USB 2.0:	1
Przewodowa sieć LAN:	Nie
Zintegrowany czytnik kart:	Nie
Kompatybilność 3D:	Nie
Pobór mocy:	57 W
Waga wraz z opakowaniem:	15100 g
Ilość portów HDMI:	3
Roczne zużycie energii:	83 kWh
Kąt widzenia (poziomy):	176 °
Kąt widzenia (pionowy):	176 °
Czas odpowiedzi (typowy):	5 ms
Standard VESA:	Tak
Interfejs do montażu panelu:	200 x 100 mm
Wersja HDMI:	1.3
Szerokość urządzenia (z podstawą):	795 mm
Głębokość urządzenia (z podstawą):	180 mm
Wysokość urządzenia (z podstawą):	534 mm
Szerokość (bez podstawy):	795 mm
Głębokość (bez podstawy):	50 mm
Wysokość (bez podstawy):	500 mm
Waga (bez podstawy):	12700 g
Jasność:	450 cd/m²
System dźwięku:	A2 Nicam
Obsługa typów dysków:	CD,CD-R,CD-RW,DVD,DVD+R,DVD+RW,DVD-R,DVD-RW
Długość przekątnej ekranu (cm):	82 cm
Wejście PC (D-Sub):	Tak
Funkcje dotyczące telegazety:	Tak
Odtwarzacz DVD:	Tak
System formatu sygnału cyfrowego:	DVB-C,DVB-T
Port DVI:	Nie
Liczba złącz scart:	1
Wspólny interfejs:	Tak
Moduł CI+:	Tak
Telewizja internetowa:	Nie
Format kompresji zdjęć:	JPG
Liczba złącz rf:	1
Nagrywanie USB:	Tak
Dołączony odtwarzacz/nagrywarka DVD:	Odtwarzacz DVD
Wyjście cyfrowe audio:	1