Instrukcja obsługi Ozito PDS-2000
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PDS-2000 (6 stron) w kategorii Sander. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
PORTABLE
DRYWALL
SANDER
225MM (9”)
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 230-240V ~ 50Hz
Power: 1200W
No Load Speed: 1,500-2,300/min
Sandpaper Diameter: 225mm
Dust Port: 35mm
Weight: 2.75kg
WHAT’S IN THE BOX
Drywall Sander
Dust Hose & Bag
Shoulder Belt
Side Handle
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
Hex Key
Sand Paper x 8
PDS-2000
0816
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will be replaced in
accordance with the terms of this warranty. Warranty excludes
consumable parts, for example: carbon brushes, dust bag, backing
pads, etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Variable Speed Dial
2 Lock-On Button
3 On/Off Trigger
4 Sure Grip Handle
5 Side Handle
6 Hook & Loop Sanding Base
7 Vacuum Speed Control
8 Dust Extraction Port
KNOW YOUR PRODUCT
5 6 7
1 2 3 4
8
1. SANDING SHEET FITMENT
9 Dust Hose
10 Dust Bag
11 Shoulder Belt
12 Sand Paper x 8
13 Hex Key
ACCESSORIES
PORTABLE DRYWALL SANDER
SETUP & PREPARATION
119 10 12 13
CAUTION: ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING
ANY OF THE FOLLOWING OPERATIONS.
2 Once the holes are aligned,
press the sanding sheet
rmly onto the hook and
loop sanding pad.
3 To remove the sanding
sheet simply peel the sheet
off the pad.
1 Align the holes on the sheet with the holes on the sanding pad.
The holes on the bottom of the sanding pad allow dust to be
removed from the work piece through the dust hose and into the
dust bag.
3. SIDE HANDLE & SHOULDER BELT
2. DUST BAG
The dust hose and dust bag allow for dust to be captured for easy
clean up and should be tted to help maintain a clean and health
working environment.
The supplied shoulder belt can be attached to the tool to help carry
some of the weight of the tool.
The dust bag has a handle to allow you to carry the dust bag with
you while you operate the tool around the room.
Fitting the Dust Bag and Hose
Sander Shoulder Belt
Dust Bag Carry Handle
Attaching the Side Handle
Emptying the Dust Bag
1 Push the end of the dust
hose onto the dust port at
the back of the tool.
1 Attach the clips at the end
of the belt to the hooks on
the front of the sander.
1 Position the dust bag over a
bin and slide the plastic clip
at the base of the dust bag
sideways.
2 To remove the dust
bag and hose, pull
the end of the hose
off the tools dust port.
2 Place the belt over
your shoulder.
2 Once emptied, slide
the plastic clip back
onto the base of the
dust bag to seal the
bag.
The dust bag should be
emptied when the bag
is half full, to maintain
optimal dust extraction.
1 Place the carry
handle over your
shoulder.
1 Attach the side
handle by rotating
clockwise into 1 of
the 2 holes either
side of the tool.
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | Sander |
| Model: | PDS-2000 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito PDS-2000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Sander Ozito
4 Października 2024
3 Października 2024
3 Października 2024
18 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024
14 Września 2024
Instrukcje Sander
- Sander AEG
- Sander Worx
- Sander Milwaukee
- Sander Bosch
- Sander Parkside
- Sander Global
- Sander Toolcraft
- Sander Festool
- Sander Bavaria By Einhell
- Sander Stanley
- Sander Black & Decker
- Sander Scheppach
- Sander Proxxon
- Sander Ribimex
- Sander Hazet
- Sander RIKON
- Sander DeWalt
- Sander Einhell
- Sander Hyundai
- Sander Silverline
- Sander Makita
- Sander RYOBI
- Sander Flex
- Sander DEDRA
- Sander Biltema
- Sander Hilti
- Sander Trotec
- Sander Dremel
- Sander Handwerk
- Sander Meec Tools
- Sander Güde
- Sander Arendo
- Sander Bavaria
- Sander Mafell
- Sander Gastroback
- Sander DURO PRO
- Sander McKenzie
- Sander Westfalia
- Sander Ergotools Pattfield
- Sander Fein
- Sander Ferm
- Sander Hitachi
- Sander Herkules
- Sander Craftsman
- Sander Matrix
- Sander Fieldmann
- Sander Ridgid
- Sander PowerPlus
- Sander Alpha Tools
- Sander Vonroc
- Sander HiKOKI
- Sander Workzone
- Sander Porter-Cable
- Sander Metabo
- Sander Skil
- Sander Cocraft
- Sander Kinzo
- Sander Far Tools
- Sander Tryton
- Sander Tacklife
- Sander Maktec
- Sander Bort
- Sander Power Craft
- Sander Topcraft
- Sander Gamma
- Sander Kress
- Sander Duro
- Sander Varo
- Sander Max
- Sander Truper
- Sander Bruder Mannesmann
- Sander Meister Craft
- Sander Probuilder
- Sander Rupes
- Sander Batavia
- Sander Protool
- Sander Holzmann
- Sander Black Decker
- Sander Stomer
- Sander Elu
- Sander Wagner SprayTech
- Sander King Craft
- Sander Powertec
- Sander Toolson
- Sander Toledo
- Sander FIXIT
- Sander Einhell Bavaria
- Sander THUN
- Sander Prowork
- Sander Pevec
- Sander TAURUS Titanium
- Sander Stalco
Najnowsze instrukcje dla Sander
15 Stycznia 2025
11 Stycznia 2025
1 Stycznia 2025
27 Grudnia 2024
27 Grudnia 2024
27 Grudnia 2024
27 Grudnia 2024
27 Grudnia 2024
26 Grudnia 2024
26 Grudnia 2024