Instrukcja obsługi Ozito MSK-001
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito MSK-001 (6 stron) w kategorii Sander. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
MULTI
SANDER
200W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 200W
No Load Speed: 7,000-12,000/min
Paper Fitment: Hook & Loop
Paper Size: 145x100mm (Triangular)
125mm (Circular)
183x92mm (1/3 Sheet)
Weight: 1.38kg
MSK-001
STANDARD EQUIPMENT
Multi Sander
3 x Sanding Paper
Dust Canister
3 x Sanding Base
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: carbon
brushes, dust bags, backing pads and sanding sheets.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0519
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
1. CHANGING SANDING BASES
6 Random Orbital Sanding Base
7 Random Orbital Sanding
Paper x 1 (120Grit)
8 Sheet Sanding Base
9 Sheet Sanding Paper x 1
(60Grit)
10 Detail Sanding Base
11 Detail Sanding Paper x 1
(80Grit)
ACCESSORIES
1 Variable Speed Dial
2 Hook & Loop Sanding Pad
3 On/OSwitch
4 Sure Grip Handle
5 Dust Canister
MULTI SANDER
SETUP & PREPARATION
WARNING: ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING
ANY OF THE FOLLOWING OPERATIONS..
WARNING: ENSURE THAT THE SCREWS ARE NOT
TIGHTENED WITH EXCESSIVE FORCE. DO NOT
USE A POWER DRILL FOR THIS OPERATION.
1 2 3 4 5
6 7 8 109 11
TheMultiSandercomeswith3sandingbasesthatcanbettedto
the tool, including:
• Circular random orbital sanding base (125mm)
• Triangular detail sanding base (145x100mm)
• Rectangular 1/3 sheet sanding base (183x91mm)
Note:Beforeremovingorttingthesandingbases,anysandpaper
must be removed so that you can access the mounting screws.
Removing Sanding Bases
Fitting Sanding Bases
1 Remove the 4 screws from the
base of the sanding pad by
rotating anti-clockwise.
1 Place the sanding base onto
the tool, aligning the mounting
holes and the aligning pins.
Note: The circular sanding base
does not require aligning pins.
2 Pull the sanding base
and aligning pins away
from the tool to remove.
Note: The base aligning
pins can sometimes get
stuck in the base of the tool.
2 Tighten the 4 screws into
the base of the sanding
pad with a screwdriver to
secure in place.
2. DUST CANISTER2. FITTING SANDING PAPER
1 Align the holes on the sanding sheet with the holes on the
sanding pad and then press onto the pad.
3 To empty, lift the lid of the dust
canister over a bin and then
empty.
Note: Ensure the lid is secured
tightly back onto the container
after emptying.
2 Push the dust canister
hard onto the dust
extraction port.
Note: You should hear a
clickoncettedcorrectly.
4 Push the dust canister
hard onto the dust
extraction port until it
clicks into place.
2 Replace the sanding sheet when it is worn.
3 Replace hook &
loop backing pad
when worn (see
maintenance section).
InstallingHook and Loop Paper Fitment
Emptying
1/3 Sheet Sanding Clamp System
1 Empty dust canister when it
becomes 1/3 full for optimum
dust extraction.
1 Ensure that the lid is pressed
tightly onto the container.
Note: You should hear a click
oncettedcorrectly.
1 Unhook one of the clamp
springs and insert the front of
the sand paper, ensuring the
holes in the paper align with
the holes in the pad.
The rectangular sheet sanding pad also features a clamping system
toallowfortting1/3sheetsandingpaperthatdoesnothavehook
andlooptment.
1/3 Full
a
b
2 Position over a bin and
press the release tab at
the top of the lid. Then
pull the dust canister
away from the extraction
port.
2 Lock the clamp spring
and repeat for the 2nd
spring, ensuring the
paper is pulled tightly.
a
b
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | Sander |
| Model: | MSK-001 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito MSK-001, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Sander Ozito
4 Października 2024
3 Października 2024
3 Października 2024
18 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024
14 Września 2024
Instrukcje Sander
- Sander AEG
- Sander Worx
- Sander Milwaukee
- Sander Bosch
- Sander Parkside
- Sander Global
- Sander Toolcraft
- Sander Festool
- Sander Bavaria By Einhell
- Sander Stanley
- Sander Black & Decker
- Sander Scheppach
- Sander Proxxon
- Sander Ribimex
- Sander Hazet
- Sander RIKON
- Sander DeWalt
- Sander Einhell
- Sander Hyundai
- Sander Silverline
- Sander Makita
- Sander RYOBI
- Sander Flex
- Sander DEDRA
- Sander Biltema
- Sander Hilti
- Sander Trotec
- Sander Dremel
- Sander Handwerk
- Sander Meec Tools
- Sander Güde
- Sander Arendo
- Sander Bavaria
- Sander Mafell
- Sander Gastroback
- Sander DURO PRO
- Sander McKenzie
- Sander Westfalia
- Sander Ergotools Pattfield
- Sander Fein
- Sander Ferm
- Sander Hitachi
- Sander Herkules
- Sander Craftsman
- Sander Matrix
- Sander Fieldmann
- Sander Ridgid
- Sander PowerPlus
- Sander Alpha Tools
- Sander Vonroc
- Sander HiKOKI
- Sander Workzone
- Sander Porter-Cable
- Sander Metabo
- Sander Skil
- Sander Cocraft
- Sander Kinzo
- Sander Far Tools
- Sander Tryton
- Sander Tacklife
- Sander Maktec
- Sander Bort
- Sander Power Craft
- Sander Topcraft
- Sander Gamma
- Sander Kress
- Sander Duro
- Sander Varo
- Sander Max
- Sander Truper
- Sander Bruder Mannesmann
- Sander Meister Craft
- Sander Probuilder
- Sander Rupes
- Sander Batavia
- Sander Protool
- Sander Holzmann
- Sander Black Decker
- Sander Stomer
- Sander Elu
- Sander Wagner SprayTech
- Sander King Craft
- Sander Powertec
- Sander Toolson
- Sander Toledo
- Sander FIXIT
- Sander Einhell Bavaria
- Sander THUN
- Sander Prowork
- Sander Pevec
- Sander TAURUS Titanium
- Sander Stalco
Najnowsze instrukcje dla Sander
15 Stycznia 2025
11 Stycznia 2025
1 Stycznia 2025
27 Grudnia 2024
27 Grudnia 2024
27 Grudnia 2024
27 Grudnia 2024
27 Grudnia 2024
26 Grudnia 2024
26 Grudnia 2024