Instrukcja obsługi Ozito MFS-4000
Ozito
szlifierka
MFS-4000
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito MFS-4000 (6 stron) w kategorii szlifierka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
MULTI
FUNCTION
SHARPENER
65W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 25W (S1);
65W (S2:8min)
No Load Speed: 7,000/min
Wheel Diameter: 49mm (2”)
Sharpening Capacity Drill bit: 3 - 10mm
Blade: 6 - 51mm
Weight: 1.32kg
MFS-4000
STANDARD EQUIPMENT
Multi Function
Sharpener
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example:
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0321
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Bench Mounting Holes
2 On/OSwitch
3 Guide Rails
4 Sharpening Wheel
5 Module Locking Clip
MULTI FUNCTION SHARPENER SIDE VIEW
6 Protective Guard
7 Adjustable Angle Knob
8 Narrow Tool Guide
9 Magnets
10 Knife Sharpening Slot
11 Scissor Sharpening Slot
12 “V” Guide
13 Drill Bit Clamp Assembly
KNOW YOUR PRODUCT
1. CHANGING MODULES
SETUP & PREPARATION
KNIFE & SCISSOR MODULE
CHISEL & BLADE MODULE DRILL BIT MODULE
CAUTION: ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING
ANY OF THE FOLLOWING OPERATIONS.
It is recommended that the Multi Function Sharpener be bolted to a
secure bench prior to operating.
Removing a Module
Installing a Module
1 Press and hold down the
module locking clip.
1 Align the module with the
guide rails on the front of
the unit.
3 Ensure locking clip is
secure by trying to raise the
module.
Note: Approximately 3mm
movement is normal
3mm
2 Slide the module
upwards to remove.
2 Slide the module
down over the
sharpening wheel
until it clicks into
place.
2. CHISEL AND BLADE SHARPENER 3.
SHARPENING KNIVES
OPERATION
CAUTION: THE TOOL IS RECOMMENDED FOR THE
USE WITH A RESIDUAL CURRENT DEVICE WITH A
RATED CURRENT OF 30mA OR LESS.
1 Install the chisel and blade
sharpener module.
3 Loosen the adjustable
angle knob and adjust the
angle to match the existing
bevelled angle on the tool.
5 Slide the blade rest back
and forth across the
sharpening wheel with light
steady pressure.
Note: When sharpening narrow chisels or blades, place the narrow
tool guide onto the blade rest to act as a spacer and sharpen
as above.
2 Position the chisel or blade
on the blade rest. The
magnets will hold the blade
in position.
4 Turn on the sharpener by
pressingtheon/oswitchto
the on position “I”.
6 Gradually lower the blade
down the blade rest until
the tool is sharpened.
0
I I
I
1 Install the knife and scissor
sharpener module.
2 Lower the handle end of the
knife into the sharpening
slot.
4 Insert the second side of
the blade into the opposite
sharpening slot and repeat
step 3.
2 Switch the sharpener on by
pressingtheon/oswitch
into the on position “I”.
3 Once the blade touches
the sharpening wheel, draw
the blade lightly across
the grinding wheel until
completely removed.
5 Repeat sharpening each
side until a clean, sharp
edge is achieved.
0
I I
I
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | szlifierka |
| Model: | MFS-4000 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito MFS-4000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje szlifierka Ozito
28 Września 2024
18 Września 2024
16 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024
12 Września 2024
11 Września 2024
20 Sierpnia 2024
9 Sierpnia 2024
Instrukcje szlifierka
- szlifierka AEG
- szlifierka Worx
- szlifierka Gorenje
- szlifierka Kawasaki
- szlifierka Milwaukee
- szlifierka SilverCrest
- szlifierka Bosch
- szlifierka Yato
- szlifierka Parkside
- szlifierka Global
- szlifierka Toolcraft
- szlifierka Festool
- szlifierka Bavaria By Einhell
- szlifierka SW-Stahl
- szlifierka Stanley
- szlifierka Mirka
- szlifierka Black & Decker
- szlifierka Scheppach
- szlifierka Proxxon
- szlifierka Adler
- szlifierka Hazet
- szlifierka RIKON
- szlifierka DeWalt
- szlifierka Einhell
- szlifierka Genesis
- szlifierka Hyundai
- szlifierka Silverline
- szlifierka Husqvarna
- szlifierka ECG
- szlifierka Makita
- szlifierka RYOBI
- szlifierka Chicago Pneumatic
- szlifierka Flex
- szlifierka GO/ON
- szlifierka DEDRA
- szlifierka Baumr-AG
- szlifierka Hilti
- szlifierka Rodcraft
- szlifierka Trotec
- szlifierka Dremel
- szlifierka Handwerk
- szlifierka Meec Tools
- szlifierka Güde
- szlifierka Arendo
- szlifierka Bavaria
- szlifierka Florabest
- szlifierka Solo
- szlifierka DURO PRO
- szlifierka McKenzie
- szlifierka Westfalia
- szlifierka Fein
- szlifierka Ferm
- szlifierka Hitachi
- szlifierka Craftsman
- szlifierka Fieldmann
- szlifierka Ridgid
- szlifierka PowerPlus
- szlifierka Alpha Tools
- szlifierka Vonroc
- szlifierka Powerfix
- szlifierka HiKOKI
- szlifierka Workzone
- szlifierka Proviel
- szlifierka Porter-Cable
- szlifierka Metabo
- szlifierka Cotech
- szlifierka Skil
- szlifierka Maestro
- szlifierka Cocraft
- szlifierka ABB
- szlifierka Aquapur
- szlifierka Toolland
- szlifierka Tryton
- szlifierka Profitec
- szlifierka United Office
- szlifierka Maktec
- szlifierka Steren
- szlifierka Bort
- szlifierka Tanaka
- szlifierka Yamato
- szlifierka Malmbergs
- szlifierka Power Craft
- szlifierka Bunn
- szlifierka Eibenstock
- szlifierka Gamma
- szlifierka Kress
- szlifierka Dolmar
- szlifierka Duro
- szlifierka Pattfield
- szlifierka Defort
- szlifierka Max
- szlifierka Truper
- szlifierka Bruder Mannesmann
- szlifierka Meister Craft
- szlifierka Batavia
- szlifierka Holzmann
- szlifierka Graphite
- szlifierka Black Decker
- szlifierka Stomer
- szlifierka Dolmar(Makita)
- szlifierka Sthor
- szlifierka Ergofix
- szlifierka Neo
- szlifierka Victoria Arduino
- szlifierka Felisatti
- szlifierka ATI-ZDL
- szlifierka Cleco
- szlifierka Gude Pro
- szlifierka Einhell Bavaria
- szlifierka Gladiator
Najnowsze instrukcje dla szlifierka
13 Stycznia 2025
12 Stycznia 2025
11 Stycznia 2025
5 Stycznia 2025
3 Stycznia 2025
31 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025
29 Grudnia 2024