Instrukcja obsługi Ozito FSR-3000
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito FSR-3000 (6 stron) w kategorii Sander. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
FILE
SANDER
260W
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 230-240V ~ 50Hz
Power: 260W
Belt Speed: 330-550m/min
Belt Size: 13 x 457mm
IP Rating: IP20
Weight: 1.15kg
FSR-3000
WHAT’S IN THE BOX
File Sander
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Warranty excludes consumable
parts, for example: sanding belt, carbon brushes etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
1016
2 x Sanding Belts
Dust Extraction
Adaptor
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Front Belt Roller
2 Rotating File Arm
3 Sure Grip Rear Handle
4 Variable Speed Dial
5 On/Off Switch
6 Rotating Arm Screw
7 Belt Tensioning Button
FILE SANDER
KNOW YOUR PRODUCT
1. SANDING BELT
SETUP & PREPARATION
8 Sanding Belt x 2 9 Dust Extraction Adaptor
ACCESSORIES
WARNING: ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING STEPS.
CAUTION: THE ARROWS ON THE BELT MUST BE
ALIGNED WITH THE MARKINGS ON THE FILE SANDER.
INCORRECT FITMENT COULD CAUSE THE BELT TO
BREAK. BELTS ARE NOT COVERED BY THE WARRANTY.
2 Make sure that the rotation
direction indicated by the
arrows on the belt and the
tool match.
1 Push the front belt
roller towards the
body of the tool, until it
clicks into place.
5 Press the belt
tensioning button
to secure the belt in
position
4 Place the other end of the
sanding belt onto the front
belt roller, making sure
that the belt is central on
both rollers.
3 Place one side of the
sanding belt down
between the rear
guide roller and the
housing.
Fitting the Sanding Belt
1 2 3 4
5
8 9
6 7
2. SANDING BELT & DUST EXTRACTION 3. ROTATING FILE ARM
2 Press the dust adaptor onto
the rotating le arm so that
the tabs on the adaptor clip
over the arm.
1 Push the front belt
roller towards the
body of the tool, until it
clicks into place.
2 Remove the sanding
belt from the rollers
1 Align the dust
extraction adaptor with
the belt tensioning
button.
The dust extraction adaptor allows you to connect a vacuum hose to
remove dust and debris from the working surface as you operate.
Note: Before attaching the dust extraction adaptor, you must rst t the
sanding belt.
3 Attach a dust hose onto the end of the dust extraction adaptor.
a
b
Removing the Sanding Belt
Fitting the Dust Extraction Adaptor
2 Adjust the angle of the rotating le arm to the desired position.
1 Screw the rotating arm
screw anti-clockwise
to allow the arm to
rotate
3 Secure in place by
rotating the rotating
arm screw clockwise.
Adjusting the File Arm Angle
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | Sander |
| Model: | FSR-3000 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito FSR-3000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Sander Ozito
4 Października 2024
3 Października 2024
3 Października 2024
18 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024
14 Września 2024
Instrukcje Sander
- Sander AEG
- Sander Worx
- Sander Milwaukee
- Sander Bosch
- Sander Parkside
- Sander Global
- Sander Toolcraft
- Sander Festool
- Sander Bavaria By Einhell
- Sander Stanley
- Sander Black & Decker
- Sander Scheppach
- Sander Proxxon
- Sander Ribimex
- Sander Hazet
- Sander RIKON
- Sander DeWalt
- Sander Einhell
- Sander Hyundai
- Sander Silverline
- Sander Makita
- Sander RYOBI
- Sander Flex
- Sander Biltema
- Sander Hilti
- Sander Trotec
- Sander Dremel
- Sander Handwerk
- Sander Meec Tools
- Sander Güde
- Sander Arendo
- Sander Bavaria
- Sander Gastroback
- Sander DURO PRO
- Sander McKenzie
- Sander Westfalia
- Sander Ergotools Pattfield
- Sander Fein
- Sander Ferm
- Sander Hitachi
- Sander Herkules
- Sander Craftsman
- Sander Matrix
- Sander Fieldmann
- Sander Ridgid
- Sander PowerPlus
- Sander Alpha Tools
- Sander Vonroc
- Sander HiKOKI
- Sander Workzone
- Sander Porter-Cable
- Sander Metabo
- Sander Skil
- Sander Kinzo
- Sander Far Tools
- Sander Tryton
- Sander Tacklife
- Sander Maktec
- Sander Bort
- Sander Power Craft
- Sander Topcraft
- Sander Gamma
- Sander Duro
- Sander Varo
- Sander Max
- Sander Truper
- Sander Bruder Mannesmann
- Sander Meister Craft
- Sander Rupes
- Sander Batavia
- Sander Protool
- Sander Holzmann
- Sander Black Decker
- Sander Stomer
- Sander Elu
- Sander King Craft
- Sander Powertec
- Sander Toolson
- Sander Toledo
- Sander FIXIT
- Sander Einhell Bavaria
- Sander THUN
- Sander Pevec
- Sander TAURUS Titanium
- Sander Stalco
Najnowsze instrukcje dla Sander
14 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024