Instrukcja obsługi Ozito DBS-095
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito DBS-095 (6 stron) w kategorii Sander. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
DRILL BIT
SHARPENER
95W
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 220-240V ~ 50Hz
Input Power: 95W
No Load Speed: 1,350/min
Working Capacity: 3mm-12mm
(1/8”-15/32”)
Weight: 1kg
WHAT’S IN THE BOX
Drill Bit Sharpener
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: carbon brushes.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0418
DBS-095
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 On/oSwitch
2 Drill Bit Template Guide
3 Grinding Stone Adjustment Dial
DRILL BIT SHARPENER
KNOW YOUR PRODUCT
1. ADJUSTING THE GRINDING STONE
3. Turn the drill bit
sharpener on.
1. Lower the grinding
stone as far as possible
by turning the grinding
stone adjustment knob
anticlockwise.
2. Insert the drill bit into
the same sized template
guide hole.
SETUP & PREPARATION
The tool is recommended for use with a residual current
device with a rated residual current of 30mA or less.
4. Raise the grinding
stone by turning
the grinding stone
adjustment knob
clockwise until it can
be heard touching
the drill bit.
NOTE: RAISING THE GRINDING STONE WILL
PRODUCE AN AGGRESSIVE GRIND AND ROUGH
EDGE. LOWERING THE GRINDING STONE WILL
PRODUCE A FINER GROUND EDGE.
2. CONTROLS 3. SHARPENING PROCEDURE
1. To turn on, press the on/
oswitchintothe“I”
position.
Turn the grinding stone
adjustment dial anti-clockwise
to lower the grinding stone.
2. Toturno,presstheon/
oswitchintothe“O”
position.
Turn the grinding stone
adjustment dial clockwise to
raise the grinding stone.
OPERATION
Turning on/o
Grinding Stone Adjustment Dial
1. Ensure the drill bit that
requires sharpening is
in the smallest template
guideitts.
2. Turn the drill bit sharpener
on.
3. Press down slightly
on the drill bit while
rotating the bit back
and forth between your
ngers.
4. Turn the drill bit sharpener
o,removethedrillbitand
examine the cutting edge
is sharp.
5. Rotate the drill bit 180º
and reinsert into the drill
bit sharpener.
180°
6. Repeat steps 2-5. Ensure that both sides of the drill bit are
sharpened for the same amount of time, using the same
amount of pressure.
Specyfikacje produktu
| Marka: | Ozito |
| Kategoria: | Sander |
| Model: | DBS-095 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ozito DBS-095, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Sander Ozito
4 Października 2024
3 Października 2024
3 Października 2024
18 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024
14 Września 2024
Instrukcje Sander
- Sander AEG
- Sander Worx
- Sander Milwaukee
- Sander Bosch
- Sander Parkside
- Sander Global
- Sander Toolcraft
- Sander Festool
- Sander Bavaria By Einhell
- Sander Stanley
- Sander Black & Decker
- Sander Scheppach
- Sander Proxxon
- Sander Ribimex
- Sander Hazet
- Sander RIKON
- Sander DeWalt
- Sander Einhell
- Sander Hyundai
- Sander Silverline
- Sander Makita
- Sander RYOBI
- Sander Flex
- Sander DEDRA
- Sander Biltema
- Sander Hilti
- Sander Trotec
- Sander Dremel
- Sander Handwerk
- Sander Meec Tools
- Sander Güde
- Sander Arendo
- Sander Bavaria
- Sander Gastroback
- Sander DURO PRO
- Sander McKenzie
- Sander Westfalia
- Sander Ergotools Pattfield
- Sander Fein
- Sander Ferm
- Sander Hitachi
- Sander Herkules
- Sander Craftsman
- Sander Matrix
- Sander Fieldmann
- Sander Ridgid
- Sander PowerPlus
- Sander Alpha Tools
- Sander Vonroc
- Sander HiKOKI
- Sander Workzone
- Sander Porter-Cable
- Sander Metabo
- Sander Skil
- Sander Cocraft
- Sander Kinzo
- Sander Far Tools
- Sander Tryton
- Sander Tacklife
- Sander Maktec
- Sander Bort
- Sander Power Craft
- Sander Topcraft
- Sander Gamma
- Sander Kress
- Sander Duro
- Sander Varo
- Sander Max
- Sander Truper
- Sander Bruder Mannesmann
- Sander Meister Craft
- Sander Probuilder
- Sander Rupes
- Sander Batavia
- Sander Protool
- Sander Holzmann
- Sander Black Decker
- Sander Stomer
- Sander Elu
- Sander King Craft
- Sander Powertec
- Sander Toolson
- Sander Toledo
- Sander FIXIT
- Sander Einhell Bavaria
- Sander THUN
- Sander Pevec
- Sander TAURUS Titanium
- Sander Stalco
Najnowsze instrukcje dla Sander
14 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024