Instrukcja obsługi Optoma X319USTir

Optoma projektor wideo X319USTir

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Optoma X319USTir (42 stron) w kategorii projektor wideo. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/42

1English

Table of Contents ............................1

Usage Notice ...................................2

Safety Information ...............................2

Precautions .........................................3

Eye Safety Warnings ...........................5

Product Features ................................5

Introduction ......................................6

Package Overview ..............................6

Product Overview ................................7

Main Unit .............................................. 7

Control Panel ....................................... 8

Input/Output Connections .................... 9

Remote Control .................................. 10

Installation .....................................11

Connecting to the Projector ..............11

Connecting a Computer/Notebook .... 11

Connecting a Video source ................ 12

Connect to 3D Video Devices ...........13

Using the 3D glasses ........................15

Powering On/Off the Projector ..........16

Powering On the Projector ................. 16

Powering Off the Projector ................. 17

Warning Indicator ............................... 18

Adjusting the Projected Image ..........19

Adjusting the Projector’s Height ........ 19

Adjusting the Projector’s Focus.......... 20

Adjusting Projection Image Size ........ 20

User Controls.................................23

Control Panel & Remote Control .......23

Control Panel .....................................23

Remote Control .................................. 24

On-screen Display Menus .................27

How to operate .................................. 27

Menu Tree ..........................................28

IMAGE ............................................... 35

IMAGE | Advanced ............................38

DISPLAY ............................................ 43

DISPLAY | 3D ...................................48

SETUP ............................................... 50

SETUP | Audio Settings ..................... 53

SETUP | Security ...............................55

SETUP | Network ............................... 57

SETUP | Network|LAN Settings .........58

SETUP | Network|Control Settings .... 60

SETUP | Signal (RGB) .......................70

SETUP | Signal (Video) ..................... 72

SETUP | Advanced ............................73

OPTIONS ........................................... 75

OPTIONS | Lamp Settings .................79

OPTIONS | Advanced ........................ 81

OPTIONS | Remote Settings ............. 83

OPTIONS | Filter Settings ..................84

Appendices ....................................85

Troubleshooting .................................85

Image Problems ................................. 85

Other Problems .................................. 87

Remote Control Problems .................87

LED Lighting Messages ..................... 88

On Screen Messages ........................89

Replacing the Lamp ..........................90

Installing and Cleaning the

Dust Filter .........................................92

Compatibility Modes .........................93

RS232 Commands and

Protocol Function List .......................95

RS232 Pin Assignments .................... 95

RS232 Protocol Function List ............96

Ceiling Mount Installation ................104

Optoma Global Offices ...................105

Regulation & Safety Notices ...........107

FCC Notice ......................................107

Declaration of Conformity for

EU countries .................................... 108

English

The lightning flash with arrow head within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous volt-

age” within the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance (servic-

ing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian Inter-

ference-Causing Equipment Regulations.

Important Safety Instruction

1. Do not block any ventilation openings. To ensure reliable operation of the

projector and to protect from over heating, it is recommended to install the

projector in a location that does not block ventilation. As an example, do

not place the projector on a crowded coffee table, sofa, bed, etc. Do not

put the projector in an enclosure such as a book case or a cabinet that

restricts air flow.

2. Do not use the projector near water or moisture. To reduce the risk of fire

and/or electric shock, do not expose the projector to rain or moisture.

3. Do not install near heat sources such as radiators, heaters, stoves or any

other apparatus such as amplifiers that emits heat.

4. Clean only with dry cloth.

5. Only use attachments/accessories specified by the manufacturer.

6. Do not use the unit if it has been physically damaged or abused. Physical

damage/abuse would be (but not limited to):

Unit has been dropped. -

Power supply cord or plug has been damaged. -

Liquid has been spilled on to the projector. -

Projector has been exposed to rain or moisture. -

Something has fallen in the projector or something is loose inside. -

Do not attempt to service the unit yourself. Opening or removing covers

may expose you to dangerous voltages or other hazards. Please call

Optoma before you send the unit for repair.

7. Do not let objects or liquids enter the projector. They may touch danger-

ous voltage points and short out parts that could result in fire or electric

shock.

8. See projector enclosure for safety related markings.

9. The unit should only be repaired by appropriate service personnel.

Safety Information

3English

Please follow all warnings, precautions and mainte-

nance as recommended in this user’s guide.

When the lamp



reaches the end

of its life, the

projector will not

turn back on until

the lamp module

has been replaced.

To replace the

lamp, follow the

procedures listed

under “Replacing

the Lamp” section

on pages 90-91.

Warning- Do not look into the projector’s lens when the

lamp is on. The bright light may hurt your eyes.

Warning- To reduce the risk of fire or electric shock, do

not expose this projector to rain or moisture.

Warning- Please do not open or disassemble the projec-

tor as this may cause electric shock.

Warning- When replacing the lamp, please allow the unit

to cool down. Follow instructions as described

on pages 90-91.

Warning- This projector will detect the life of the lamp

itself. Please be sure to change the lamp when

it shows warning messages.

Warning- Reset the “Lamp Reset” function from the on-

screen display “Options|Lamp Settings” menu

after replacing the lamp module (refer to page

79).

Warning- When switching the projector off, please ensure

the cooling cycle has been completed before

disconnecting power. Allow 90 seconds for the

projector to cool down.

Warning- When the lamp is approaching to the end of its

life time, the message “Lamp life exceeded.”

will show on the screen. Please contact your

local reseller or service center to change the

lamp as soon as possible.

Precautions

Specyfikacje produktu

Marka:	Optoma
Kategoria:	projektor wideo
Model:	X319USTir
Kolor produktu:	Szary
Typ produktu:	Projektor ultrakrótkiego rzutu
Źródło zasilania:	Prąd przemienny
Wbudowany wyświetlacz:	Nie
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	99 mm
Szerokość produktu:	385 mm
Głębokość produktu:	310 mm
Waga produktu:	4570 g
W zestawie pilot zdalnego sterowania:	Tak
Podręcznik użytkownika:	Tak
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Poziom hałasu:	26 dB
Wbudowane głośniki:	Tak
Moc wyjściowa (RMS):	16 W
Wyjścia słuchawkowe:	1
Obsługiwany typ USB:	USB Typu-A
Obsługiwane systemy operacyjne Mac:	Tak
Ilość portów Ethernet LAN (RJ-45):	1
Umieszczenie:	Komputer stacjonarny
Zakres temperatur (eksploatacja):	5 - 40 °C
Zakres wilgotności względnej:	0 - 85 %
Współczynnik kontrastu (typowy):	18000:1
Natywne proporcje obrazu:	4:3
Wi-Fi:	Nie
Skrócona instrukcja obsługi:	Tak
Przewody:	AC, VGA
Pobór mocy w trybie czuwania:	0.5 W
Liczba portów USB 2.0:	1
Przewodowa sieć LAN:	Tak
Zintegrowany czytnik kart:	Nie
Kompatybilność 3D:	Tak
Pobór mocy:	235 W
Ilość lamp:	1 lamp(y)
Ilość portów HDMI:	2
Mikrofon:	Tak
Port RS-232:	1
Baterie w zestawie:	Tak
Kensington Lock:	Tak
Typ gniazda zamka kabla:	Kensington
Liczba portów VGA (D-Sub):	3
Wyście mocy ac:	Tak
Ilość wbudowanych glosników:	1
Dopuszczalna wysokość podczas eksploatacji (n.p.m.):	0 - 3000 m
Długość ogniskowa:	- mm
Zasięg skanowania w poziomie:	15.3 - 91.1 kHz
Zasięg skanowania (długość):	24 - 85 Hz
Obsługiwane rozdzielczości grafiki:	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1360 x 768 (WXGA), 1600 x 1200 (UXGA)
Złożone wejście wideo:	1
Obsługiwane tryby wideo:	480i, 480p, 720p, 1080i, 1080p
OSD:	Tak
Port DVI:	Nie
Obsługiwane proporcje obrazu:	16:9
Rodzaj złącza HDMI:	Pełnorozmiarowy
Pełny HD:	Nie
System formatu sygnału analogowego:	NTSC, NTSC 3.58, NTSC 4.43, NTSC M, PAL, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, SECAM, SECAM B, SECAM D, SECAM G, SECAM K, SECAM K1, SECAM L
Interfejs SCSI:	RS-232
Jasność projektora:	3200 ANSI lumenów
Technologia projekcji:	DLP
Naturalna rozdzielczość projektora:	XGA (1024x768)
Korekcja Keystone'a, poziom:	-20 - 20 °
Jednorodność:	85 %
Odległość projekcji:	0.47 - 0.68 m
Kompatybilność rozmiaru ekranu:	70 - 100 "
Rodzaj źródła światła:	Lampa
Moc lampy:	190 W
Żywotność źródła światła:	4500 h
Żywotność źródła światła (tryb ekonomiczny):	7000 h
Stosunek padania:	0.33:1
Współczynnik zbliżenia:	Stały
Przesunięcie:	117 %
Ilość kolorów:	1.073 billionów kolorów
Rozmiar matrycy:	0.55 "
Pobór mocy (tryb ekonomiczny):	200 W
Obsługiwane formaty 3D:	Frame packing, Side by side