Instrukcja obsługi Optoma W401

Optoma projektor wideo W401

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Optoma W401 (79 stron) w kategorii projektor wideo. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/79

1English

Table of Contents ............................1

Usage Notice ...................................2

Safety Information ...............................2

Precautions .........................................3

Eye Safety Warnings ..........................6

Product Features ................................6

Introduction ......................................7

Package Overview ..............................7

Product Overview ...............................8

Main Unit .............................................. 8

Control Panel ....................................... 9

Input/Output Connections .................. 10

Remote Control .................................. 11

Installation .....................................12

Connecting the Projector ..................12

Connect to Computer/Notebook ........ 12

Connect to Video Sources ................. 13

Connect to 3D Video Devices ...........14

Using the 3D glasses ........................16

Powering On/Off the Projector ..........17

Powering On the Projector ................. 17

Powering Off the Projector ................. 18

Warning Indicator ............................... 19

Adjusting the Projected Image ..........20

Adjusting the Projector’s Height ........20

Adjusting the Projector’s Zoom /

Focus ................................................. 21

Adjusting Projection Image Size ........21

User Controls ................................23

Control Panel & Remote Control ......23

Control Panel ..................................... 23

On-screen Display Menus ................29

How to operate .................................. 29

Menu Tree .......................................... 30

IMAGE ...............................................32

IMAGE | Advanced ............................ 34

IMAGE | Advanced | Signal .............. 36

DISPLAY ............................................37

DISPLAY | 3D ...................................42

SETUP ............................................... 43

SETUP | Audio Settings ..................... 45

SETUP | Security ............................... 46

SETUP | Advanced ............................ 47

SETUP | Network .............................. 48

SETUP | Network | LAN Settings .......49

SETUP | Network | Control Settings 52 .

OPTIONS ........................................... 53

OPTIONS | Lamp Settings ................. 55

OPTIONS | Advanced ........................ 56

OPTIONS | Filter Settings .................. 57

Appendices ....................................58

Troubleshooting ................................58

Image Problems ................................. 58

Other Problems .................................. 61

Remote Control Problems .................61

LED Lighting Messages ..................... 62

On Screen Messages ........................63

Replacing the Lamp ..........................65

Compatibility Modes .........................67

RS232 Commands and Protocol

Function List .....................................69

RS232 Pin Assignments .................... 69

RS232 Protocol Function List ............ 70

Ceiling Mount Installation ..................74

Optoma Global Ofces .....................75

Regulation & Safety Notices .............77

FCC Notice ........................................ 77

Declaration of Conformity for EU

countries ............................................78

Trademarks .......................................79

Table of Contents

English

Usage Notice

The lightning ash with arrow head within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous volt-

age” within the product’s enclosure that may be of sufcient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance (servic-

ing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Important Safety Instruction

1. Do not block any ventilation openings. To ensure reliable operation of the

projector and to protect from over heating, it is recommended to install the

projector in a location that does not block ventilation. As an example, do

not place the projector on a crowded coffee table, sofa, bed, etc. Do not

put the projector in an enclosure such as a book case or a cabinet that

restricts air ow.

2. Do not use the projector near water or moisture. To reduce the risk of re

and/or electric shock, do not expose the projector to rain or moisture.

3. Do not install near heat sources such as radiators, heaters, stoves or any

other apparatus such as ampliers that emits heat.

4. Clean only with dry cloth.

5. Only use attachments/accessories specied by the manufacturer.

6. Do not use the unit if it has been physically damaged or abused. Physical

damage/abuse would be (but not limited to):

Unit has been dropped. -

Power supply cord or plug has been damaged. -

Liquid has been spilled on to the projector. -

Projector has been exposed to rain or moisture. -

Something has fallen in the projector or something is loose inside. -

Do not attempt to service the unit yourself. Opening or removing covers

may expose you to dangerous voltages or other hazards. Please call

Optoma before you send the unit for repair.

7. Do not let objects or liquids enter the projector. They may touch danger-

ous voltage points and short out parts that could result in re or electric

shock.

8. See projector enclosure for safety related markings.

9. The unit should only be repaired by appropriate service personnel.

Safety Information

3English

Usage Notice

Please follow all warnings, precautions and mainte-

nance as recommended in this user’s guide.

When the lamp 

reaches the end

of its life, the pro-

jector will not turn

back on until the

lamp module has

been replaced. To

replace the lamp,

follow the proce-

dures listed under

“Replacing the

Lamp” section.

▀■ Warning- Do not look into the projector’s lens when the

lamp is on. The bright light may hurt your eyes.

▀■ Warning- To reduce the risk of re or electric shock, do

not expose this projector to rain or moisture.

▀■ Warning- Please do not open or disassemble the projec-

tor as this may cause electric shock.

▀■ Warning- When replacing the lamp, please allow the unit

to cool down.

▀■ Warning- This projector will detect the life of the lamp

itself. Please be sure to change the lamp when

it shows warning messages.

▀■ Warning- Reset the “Lamp Reset” function from the

on-screen display “OPTIONS | Lamp Settings”

menu after replacing the lamp module.

▀■ Warning- When switching the projector off, please ensure

the cooling cycle has been completed before

disconnecting power. Allow 90 seconds for the

projector to cool down.

▀■ Warning- Do not use lens cap when projector is in opera-

tion.

▀■ Warning- When the lamp is approaching to the end of

its life time, the message “Replacement sug-

gested” will show on the screen. Please contact

your local reseller or service center to change

the lamp as soon as possible.

▀■ Warning- Do not look into or point the laser pointer on

your remote control into your or someone’s

eyes. Laser pointer can cause permanent dam-

age to eyesight.

NOTE

Precautions

Specyfikacje produktu

Marka:	Optoma
Kategoria:	projektor wideo
Model:	W401
Kolor produktu:	Czarny
Źródło zasilania:	Prąd przemienny
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	97 mm
Szerokość produktu:	324 mm
Głębokość produktu:	234 mm
Waga produktu:	3230 g
W zestawie pilot zdalnego sterowania:	Tak
Podręcznik użytkownika:	Tak
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Bluetooth:	Nie
Poziom hałasu:	- dB
Wbudowane głośniki:	Tak
Moc wyjściowa (RMS):	16 W
Wyjścia słuchawkowe:	1
Zasięg obiektywu:	2.41 - 2.66
Ilość portów Ethernet LAN (RJ-45):	1
Zakres temperatur (eksploatacja):	5 - 40 °C
Współczynnik kontrastu (typowy):	15000:1
Natywne proporcje obrazu:	16:10
Możliwość przybliżenia:	Tak
Skrócona instrukcja obsługi:	Tak
Przewody:	USB, VGA
Pobór mocy w trybie czuwania:	0.5 W
Liczba portów USB 2.0:	1
Przewodowa sieć LAN:	Tak
Zintegrowany czytnik kart:	Nie
Kompatybilność 3D:	Tak
Pobór mocy:	335 W
Karta gwarancyjna:	Tak
Ilość lamp:	1 lamp(y)
Diody LED:	Tak
Ilość portów HDMI:	1
Port RS-232:	1
Baterie w zestawie:	Tak
Kensington Lock:	Tak
Typ gniazda zamka kabla:	Kensington
Liczba portów VGA (D-Sub):	3
Wersja HDMI:	1.4a
Ilość wbudowanych glosników:	2
Dopuszczalna wysokość podczas eksploatacji (n.p.m.):	0 - 3000 m
Długość ogniskowa:	18.2 - 21.8 mm
Zasięg skanowania w poziomie:	15.375 - 91.146 kHz
Zasięg skanowania (długość):	24 - 85 Hz
Obsługiwane rozdzielczości grafiki:	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Złożone wejście wideo:	1
Obsługiwane tryby wideo:	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
OSD:	Tak
Walizka:	Tak
Port DVI:	Tak
Obsługiwane proporcje obrazu:	4:3, 16:9, 16:10
Pełny HD:	Nie
Pilot zdalnego sterowania:	Podczerwień
System formatu sygnału analogowego:	NTSC 3.58, NTSC 4.43, NTSC M, PAL B, PAL D, PAL G, PAL H, PAL I, PAL M, PAL N, SECAM B, SECAM D, SECAM G, SECAM H, SECAM K, SECAM K1, SECAM L
Rodzaj ochrony hasłem:	Użytkownik
Dołączony odtwarzacz/nagrywarka DVD:	Nie zawiera
Typ gniazda cardbus pcmcia:	Nie
Interfejs SCSI:	RS-232
Jasność projektora:	4500 ANSI lumenów
Technologia projekcji:	DLP
Naturalna rozdzielczość projektora:	WXGA (1280x800)
Korekcja Keystone'a, poziom:	-40 - 40 °
Jednorodność:	80 %
Odległość projekcji:	1.2 - 10 m
Kompatybilność rozmiaru ekranu:	36.3 - 362 "
Rodzaj źródła światła:	Lampa
Moc lampy:	280 W
Żywotność źródła światła:	- h
Żywotność źródła światła (tryb ekonomiczny):	7000 h
Stosunek padania:	1.28 - 1.54:1
Współczynnik zbliżenia:	1.2:1
Rodzaj zoomu:	Ręczny
Przesunięcie:	112.5 %
Poziom hałasu (tryp ekonomiczn):	29 dB
Ilość kolorów:	1.073 billionów kolorów
Rozmiar matrycy:	0.65 "
Okulary 3D dostępne w zestawie:	Nie
Wyjście skanera postępowego:	Tak