Instrukcja obsługi Omron RS8

Omron Monitor ciśnienia krwi RS8

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Omron RS8 (2 stron) w kategorii Monitor ciśnienia krwi. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Introduction

Thank you for purchasing the OMRON RS8 Wrist Blood Pressure

Monitor.

The OMRON RS8 is a compact and easy to use blood pressure

monitor, operating on the oscillometric principle. It measures your

blood pressure and pulse rate simply and quickly. For comfortable

controlled inflation without the need of pressure pre-setting or

re-inflation the device uses its advanced “IntelliSense” technology.

Intended Use

This product is designed to measure the blood pressure and pulse

rate of people within the range of the designated wrist cuff, following

the instructions in this instruction manual.

It is mainly designed for general household use. Please read the

Important Safety Information in this instruction manual before using

the unit.

Please read this instruction manual thoroughly before using the

unit.

Please keep for future reference.

For specific information about your own blood pressure,

CONSULT YOUR DOCTOR.

Important Safety Information

Consult your doctor prior to using in pregnancy or if diagnosed with

arrhythmia or arteriosclerosis.

Please read this section carefully before using the unit.

Warning:

• Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

(General Usage)

• Always consult your doctor. Self-diagnosis of measurement results

and self-treatment are dangerous.

• People with severe blood flow problems, or blood disorders, should

consult a doctor before using the unit, as cuff inflation can cause

internal bleeding.

(Battery Usage)

• If battery fluid should get in your eyes, immediately rinse with

plenty of clean water. Consult a doctor immediately.

Caution:

• Indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury to the user or patient or

damage to the equipment or other property.

(General Usage)

• Do not leave the unit unattended with infants or persons who

cannot express their consent.

• Do not use the unit for any purpose other than measuring blood

pressure.

• Do not use a mobile phone or other devices that emit

electromagnetic fields, near the unit. This may result in incorrect

operation of the unit.

• Do not disassemble the unit or wrist cuff.

• Do not operate the unit in a moving vehicle (car, airplane).

(Battery Usage)

• If battery fluid should get on your skin or clothing, immediately rinse

with plenty of clean water.

• Use only two “AAA” alkaline (LR03) batteries with this unit. Do not

use other types of batteries.

• Do not insert the batteries with their polarities incorrectly aligned.

• Replace old batteries with new ones immediately. Replace both

batteries at the same time.

• Remove the batteries if the unit will not be used for three months or

more.

• Do not use new and used batteries together.

General Precautions

• Do not apply strong shocks and vibrations to or drop the unit.

• Do not take measurements after bathing, drinking alcohol or

caffeine, smoking, exercising or eating.

• Do not inflate the wrist cuff when it is not wrapped around your

wrist.

• Read and follow the “Important information regarding Electro

Magnetic Compatibility (EMC)” in the Technical Data Section.

• Read and follow the “Correct Disposal of This Product” in the

Technical Data Section when disposing of the device and any used

accessories or optional parts.

1. Overview

Main unit:

A. Wrist cuff

B. Battery compartment

C. Display

D. User ID selection switch

E. Weekly average ( ) button

F. Memory ( ) button

G. Transfer area

H. START/STOP button

I. Date/Time setting ( ) button

J. Date/Time setting ( ) button

Display:

A. Memory symbol

B. Systolic blood pressure

C. Diastolic blood pressure

D. Battery low symbol

E. Heartbeat symbol (Flashes during measurement)

F. Irregular heartbeat symbol

G. Average value symbol

H. Date/Time display

I. Morning average symbol

J. Evening average symbol

K. Blood pressure trend graph

L. Blood pressure level indicator

M. Positioning indicator

N. Positioning symbol

O. Cuff wrapping guide

P. User ID symbol (A or B)

Q. OK symbol

R. Transfer indicator

S. Deflation symbol

T. Pulse display and Memory number

U. Movement error symbol

2. Preparation

2.1 Installing/Replacing the Batteries

1. Remove the battery cover.

2. Insert two 1.5 V “AAA”

alkaline (LR03) batteries

as indicated in the battery

compartment and then

replace the battery cover.

Notes:

• If the battery low symbol ( ) appears on the display, turn off

the unit then replace both batteries at the same time.

• The measurement values continue to be stored in memory

even after the batteries are replaced.

Disposal of used batteries should be carried out in accordance

with the national regulations for the disposal of batteries.

2.2 Setting the Date and Time

1. Press the button.

2. Set the monitor to the correct date and time

before taking a measurement for the first time.

3. Press the START/STOP button to store the setting.

Notes:

• If the batteries have been removed, the date and time setting

will need to be reset.

• If the date and time are not set, “-:--” appears during or after

measurement.

3. Using the Unit

3.1 Applying the Wrist Cuff

Do not apply over clothing.

1. Put your arm through the

cuff loop.

Your palm should face upward.

2. Wrap the wrist cuff around

your wrist.

Wrap the wrist cuff securely

around the wrist for taking

accurate measurements.

Make sure that the wrist cuff

does not cover the protruding

part of the wrist bone (ulna) on

the outside of the wrist.

Notes:

• You can take a measurement on

either your left or right wrist.

• If the wrist cuff comes off,

assemble as shown in the figure.

3.2 How to Sit Correctly

To take a measurement, you need

to be relaxed and comfortably

seated, under comfortable room

temperature. No bathing, drinking

alcohol or caffeine, smoking,

exercising or eating 30 minutes

before taking a measurement.

• Sit on a chair with your feet flat on the

floor.

• Sit upright with your back straight.

• The cuff should be at the same level

as your heart.

• Relax your wrist and hand. Do not bend your wrist back, clench

your fist, or bend your wrist forward.

3.3 Taking a Reading

Notes:

• To cancel a measurement, press the START/STOP button at

any time during measurement.

• Remain still while taking a measurement.

1. Select your User ID.

2. Press the START/STOP button.

All the symbols appear on the display.

While your position is improper, the Positioning symbol and the

Positioning indicator flash, when you are in proper position the

Positioning symbol lights on the display.

After the Positioning symbol lights for more than 2 seconds,

the wrist cuff will start to inflate automatically.

Cuff Wrapping Guide

The Cuff Wrapping Guide is a unique feature that

indicates if the cuff is not wrapped tightly enough

around the wrist. Even when the is displayed, a

blood pressure reading will be taken.

Note: This reading is reliable due to the incorrect NOT

wrapping of the cuff. Please wrap the cuff again, taking

care to wrap it correctly and take the measurement

again. When the is displayed, the cuff is correctly

wrapped tightly enough on the wrist and the reading is

accurate and reliable.

3. Undo the wrist cuff and remove the unit.

Press the START/STOP button to turn off the monitor.

The monitor automatically stores the measurement in its memory.

It will automatically turn off after two minutes.

Important:

• Recent research suggests that the

following values can be used as a

guide to high blood pressure for

measurements taken at home.

This criteria is for home blood pressure measurement.

• Your blood pressure monitor includes an

irregular heartbeat feature. Irregular

heartbeats can influence the results of the

measurement. The irregular heartbeat

algorithm automatically determines if the

measurement is usable or needs to be

repeated. If the measurement results are

affected by irregular heartbeats but the result

is valid, the result is shown together with the

irregular heartbeat symbol ( ).

If the irregular heartbeats cause the measurement to be

invalid, no result is shown. If the irregular heartbeat symbol

( ) is shown after you have taken a measurement, repeat

the measurement. If the irregular heartbeat symbol ( ) is

shown frequently, please make your doctor aware of it.

• If you move during measurement, the

movement error symbol ( ) will appear on the

display. Keep still and repeat the measurement.

Notes:

• Wait 2 - 3 minutes before taking another

blood pressure measurement. Waiting

between readings allows the arteries to

return to the condition prior to taking the

blood pressure measurement.

• The blood pressure can differ between the right arm and the

left arm, and therefore also the measured blood pressure

values can be different. OMRON recommends to always use

the same arm for measurement. If the values between the

two arms differ substantially, please check with your

physician which arm to use for your measurement.

Warning:

Self-diagnosis of measured results and treatment are

dangerous. Please follow the instructions of your doctor.

3.4 Setting the Positioning Sensor

1. Press and hold the

button to reset the

Positioning sensor.

The Positioning sensor

is set “on” as default.

2. Press the START/STOP button to store the setting.

3.5 Using the Memory Function

The monitor automatically stores the result up to 100 sets for

each user (A and B).

It can also calculate an average reading based on the

measurements from the last three readings taken within 10

minutes. If there are only two readings in memory for that

period, the average will be based on two readings. If there is

one reading in memory for that period, the average will be

based on one reading.

Notes:

• If the memory is full, the monitor will delete the oldest

readings.

• When viewing the reading taken without setting the date and

time, “-:--” is displayed instead of the date and time.

To View the Average Value

1. Select your User ID.

2. Press the button.

Note: If there are no measurements

results stored in the memory, the

screen to the right is displayed.

Wrist Blood

Pressure Monitor

Model RS8

Instruction Manual

IM-HEM-6310F-E-EN-02-07/2013

1883294-6B

J I

G I

U T

Year

Month

Day

Hour

Minute

1) Push the button to change.

• Hold down to advance the digit rapidly.

2) Push the button to confirm.

• Next setting appears.

The monitor is in

proper position.

The monitor is higher

than the heart.

The monitor is lower

than the heart.

Systolic Blood Pressure Above 135 mmHg

Diastolic Blood Pressure Above 85 mmHg

Cuff Wrapping Guide

START INFLATE DEFLATE COMPLETE

Alternating date/time display

To View the Readings Stored in Memory

1. Press the button, while the average value is

displayed.

The Memory number

appears for a second

before the pulse rate is

displayed. The newest

set is numbered “1”.

2. Press the button repeatedly to view the

readings stored in memory.

To View the Weekly Averages

This unit calculates and displays weekly averages for the

measurements taken in the morning and evening within 8

weeks for each user.

Note: The week begins Sunday at 2:00.

1. Select your User ID.

2. Press the button once.

The morning average for the current

week “THIS WEEK” appears on the

display.

3. Press the button again.

The evening average for the current

week “THIS WEEK” appears on the

display.

4. Continue to press the button to display the

previous weeks.

The unit displays “-1 WEEK” for the previous week to

“-7 WEEK” for the oldest set of averages.

5. Press the START/STOP button to turn off the

monitor.

Morning Weekly Average

This is the average for the measurements taken during the

morning (4:00 - 11:59) between Sunday and Saturday. An

average for each day is calculated for up to three

measurements taken within 10 minutes of the first

measurement of the morning.

Evening Weekly Average

This is the average for the measurements taken during the

evening (19:00 - 1:59) between Sunday and Saturday. An

average for each day is calculated for up to three

measurements taken within 10 minutes of the last

measurement of the evening.

The Blood Pressure Trend Graph

This unit also displays the Blood Pressure Trend Graph which

shows the weekly averages for the Systolic Blood Pressure

(SYS) taken in the morning and evening within 8 weeks for

each user. The graph is displayed 4 weeks averages so that

you can see the continuous blood pressure change.

To Delete All the Values Stored in Memory

The values stored in the memory are deleted by

User ID.

When the memory symbol ( ) appears, first press

the button. Then while holding it down, press the

START/STOP button simultaneously for about 2 - 3

seconds.

Note: You cannot partially delete the stored readings.

All values for the user you select will be deleted.

4. Troubleshooting and Maintenance

4.1 The Icons and Error Messages

Note: The irregular heartbeat symbol ( ) and the movement error

symbol ( ) may also be displayed with error messages.

4.2 Troubleshooting

4.3 Transferring the Data to the Online

Solution

To begin using the software for the first time, please

visit www.omron-healthcare.com for the initial set-up

instructions.

4.4 Maintenance

To protect your unit from damage, please observe the

following:

• Do not subject the main unit and the cuff to

extreme temperatures, humidity, moisture or

direct sunlight.

• Do not disassemble the unit.

• Do not subject the unit to strong shocks or

vibrations (for example, dropping the unit on the

floor).

• Do not use volatile liquids to clean the main unit.

• Do not wash the cuff or immerse it in water.

• Do not use petrol, thinners or similar solvents to

clean the cuff.

• Do not carry out repairs of any kind yourself. If a

defect occurs, consult your OMRON retail outlet

or distributor as mentioned on the packaging.

• The unit should be cleaned with a soft, dry cloth.

• Use a soft, moistened cloth and neutral soap to

clean the cuff.

• Keep the unit in its storage case when not in

use.

• Fold the cuff into the storage case.

Do not store the unit in the following situations:

• If the unit is wet.

• Locations exposed to extreme temperatures,

humidity, direct sunlight, dust or corrosive

vapours.

• Locations exposed to vibrations, shocks or

where it will be at an angle.

Calibration and Service

• The accuracy of this blood pressure monitor has

been carefully tested and is designed for a long

service life.

• It is generally recommended to have the unit

inspected every two years to ensure correct

functioning and accuracy. Please consult your

authorised OMRON dealer or the OMRON

Customer Service at the address given on the

packaging or attached literature.

5. Technical Data

Note: Subject to technical modification without prior notice.

• This device fulfils the provisions of EC directive 93/42/EEC

(Medical Device Directive).

• This blood pressure monitor is designed according to the European

Standard EN1060, Non-invasive sphygmomanometers Part 1:

General Requirements and Part 3: Supplementary requirements

for electromechanical blood pressure measuring systems.

• This OMRON product is produced under the strict quality system of

OMRON HEALTHCARE Co. Ltd., Japan. The Core component for

OMRON blood pressure monitors, which is the Pressure Sensor, is

produced in Japan.

Made in China

Alternating

date/time

display

This week

Morning average

Note: If there are not enough

measurements taken in a week

to calculate the average the

display will appear as

illustrated.

This week

Evening average

Last week

Morning average

Last week

Evening average

7 weeks ago

Evening average

7 weeks ago

Morning average

First measurement of

the morning

Within 10 minutes

11:59

4:00

Measurements of the morning

Up to 3 measurements

Morning Blood Pressure

Measurement

Sunday Monday Tuesday Wednesday Thursday Friday Saturday

Measurements of the evening

Last measurement of

the evening

Within 10 minutes

1:59

19:00

Up to 3 measurements

Evening Blood Pressure

Measurement

Sunday Monday Tuesday Wednesday Thursday Friday Saturday

Error Display Cause Remedy

Irregular heartbeats

are detected.

Remove the wrist cuff. Wait

2 - 3 minutes and then take

another measurement.

Repeat the steps in section

3.3. If this error continues to

appear, contact your doctor.

Movement during

measurement.

Carefully read and repeat the

steps in section 3.3.

Blink The batteries are

low.

You should replace them with

new ones ahead of time.

Refer to section 2.1.

Lit The batteries are

exhausted.

You should replace them with

new ones at once.

Refer to section 2.1.

Wrist cuff not

applied correctly.

Apply the wrist cuff correctly.

Refer to section 3.1.

Movement during

measurement.

Repeat Measurement while

remaining still and refraining

from talking during the

measurement.

Refer to section 3.3.

Wrist cuff not

applied correctly, or

movement during

measurement.

Apply the wrist cuff correctly

and repeat measurement

while remaining still and

refraining from taking during

the measurement.

Refer to section 3.1 and 3.3.

Arm position

changed during

measurement.

Remain still until the

measurement is complete.

Refer to section 3.3.

Device error. Contact your OMRON retail

outlet or distributor.

Note:It flashes to show

which week

average value is

displayed.

Systolic blood

pressure

above169 mmHg

152 - 168 mmHg

136 - 151 mmHg

119 - 135 mmHg

118 mmHg or less

3 weeks ago

7 weeks ago

2 weeks ago

6 weeks ago

Last week

5 weeks ago

This week

4 weeks ago

This week - 3 weeks ago

This week

morning SYS average

118 mmHg

This week

evening SYS average

140 mmHg

4 weeks ago - 7 weeks ago

7 weeks ago

morning SYS average

112 mmHg

7 weeks ago

evening SYS average

138 mmHg

First Second

Problem Cause Remedy

The reading is

extremely low

(or high).

The wrist cuff is not

at heart level.

Measure while in the

correct posture.

Refer to section 3.2.

The cuff is not

wrapped snugly

around the wrist.

Wrap the cuff correctly.

Refer to section 3.1.

The arms and

shoulders are

tense.

Relax and try taking the

measurement again.

Refer to section 3.3.

Movement or

talking during

measurement.

Remain still and do not

talk during Measurement.

Refer to section 3.3.

Wrist cuff pressure

does not rise.

Air is leaking from

the wrist cuff.

Consult your OMRON

retail outlet or distributor.

Wrist cuff deflates

too soon.

The wrist cuff is

loose.

Apply the cuff correctly so

that it is firmly wrapped

around the wrist. Refer to

section 3.1.

The blood pressure is different

each time. The reading is

extremely low (or high).

Blood pressure readings

constantly vary with time

of day and how relaxed

you are. Take several

deep breaths and try to

remain relaxed before

taking a measurement.

The unit loses

power during

measurement. The batteries are

exhausted.

Replace the batteries with

new ones.

Refer to section 2.1.

Nothing happens

when you press

the buttons.

The batteries have

been inserted

incorrectly.

Insert the batteries with

the correct (+/-) polarity.

Refer to section 2.1.

Specyfikacje produktu

Marka:	Omron
Kategoria:	Monitor ciśnienia krwi
Model:	RS8

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Omron RS8, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Monitor ciśnienia krwi Omron

Omron RS1 Instrukcja

4 Października 2024

Omron X2 Smart+ HEM-7146T2-ESL Instrukcja

3 Października 2024

Omron M1 Compact Instrukcja

1 Października 2024

Omron BP6350 Instrukcja

1 Października 2024

Omron CD-CS9 Instrukcja

1 Października 2024

Omron M 400 - HEM-7131 Instrukcja

26 Września 2024

Omron M 400 IT - HEM-7131U Instrukcja

26 Września 2024

Omron M24-7 ABPM Instrukcja

26 Września 2024

Omron HEM-4500 Solar Instrukcja

25 Września 2024

Omron 705CP-2 Instrukcja

25 Września 2024

Instrukcje Monitor ciśnienia krwi

Najnowsze instrukcje dla Monitor ciśnienia krwi

Medel Palm Self Instrukcja

9 Października 2024

Medel Dualstetho PRO Instrukcja

9 Października 2024

Medel Stetho Self Instrukcja

9 Października 2024

Medel Sense Instrukcja

9 Października 2024

Medel Soft TMB-1581-S Instrukcja

8 Października 2024

Mx Onda MX-CP2396 Instrukcja

7 Października 2024

Scala SC 6750A Instrukcja

4 Października 2024

Cresta BPM701 Instrukcja

4 Października 2024

Sanitas SBC 23 Instrukcja

4 Października 2024

Rossmax X3 BT Instrukcja

3 Października 2024