Instrukcja obsługi Olympus X-450

Olympus Aparat cyfrowy X-450

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Olympus X-450 (2 stron) w kategorii Aparat cyfrowy. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

2Holding the lock button, slide the

battery compartment/card cover in

the direction of , and then lift it in

the direction of .

3Insert the batteries, making sure that

they are correctly oriented as shown

in the illustration.

4Holding the batteries down with the

battery compartment/card cover,

close the cover in the direction of

and slide it in the direction of .

b.Attaching the strap

Lock button

Battery compartment/card cover

b.Setting the Date and Time

Set the date and time before using the camera for

the first time.

The information will be recorded with each picture.

1Display the menu.

2Select .

3Display the screen.

4Select the date format.

• The following steps show the procedure

used when Y-M-D is selected.

5Move to the year field.

6Set the year.

7Repeat Steps 5 and 6 until all date/time fields

have been set.

• Time is entered using the 24-hour format.

8Press to set the date and time.

9Press to exit the menu.

Arrow pad ( )

OK button ( )

Menu button ( )

Before you begin using your Olympus Digital camera…

a. Loading the batteries

1Make sure the camera is turned off.

• The monitor is off.

• The green lamp and the orange lamp

on the camera are off.

• The lens is not extended.

Orange lamp

Green lampMonitor

Printed in China

UNPACKING THE BOX CONTENTS

Gather your digital camera and the parts as shown in the illustration. If any accompanying item is missing or damaged, contact

the store where you purchased the camera.

TURNING ON THE CAMERA

Turn the camera on and check the monitor indications.

a. Turning the Camera On (Shooting mode)

Set the mode dial to and press the power

switch.

• The camera turns on in the shooting mode.

• The lens extends and the monitor turns on.

• To turn the camera off, press the power switch.

Power switch

Shooting button ( )

Mode dial

To maximize battery life, the monitor turns off and the

camera enters sleep mode after approximately 30

seconds of non-use.To reactivate the camera, press

the shutter button or .

TIPS

The following items are also included in the Digital camera package: video cable, warranty card, registration card (not provided in

some areas), and safety precautions booklet.

Digital camera Strap AA (R6) alkaline

batteries (2)

USB cable Basic manual Reference Manual

CD-ROM

OLYMPUS Master CD-ROM/

Installation guide

DIGITAL CAMERA

APPAREIL PHOTO NUM

ÉRIQUE

DIGITALKAMERA

CÁMARA DIGITAL

D-535 ZOOM

C-370 ZOOM

X-450

BASIC MANUAL

MANUEL DE BASE

EINFACHE ANLEITUNG

MANUAL BÁSICO

ENGLISH..........2

FRANÇAIS .....40

DEUTSCH ......78

ESPAÑOL ....116

Thank you for purchacing an Olympus digital camera.

c. Camera Diagram and Controls

Now take a moment to familiarize yourself with the key areas of camera controls by reviewing the

illustrations.

Monitor Indications in Shooting Mode Monitor Indications in Playback Mode

Depending on the camera settings, not all indicators will be displayed.

VIDEO OUT jack

Self-timer lamp

USB connector

DC-IN jack

Shutter button Flash

Strap eyelet

OPEN

PUSH

Monitor

Arrow pad ( )

OK button ( )

Power switch

Battery compartment/

card cover

Tripod socket

Mode dial

Flash mode button ( )

Card slot

Battery compartment

Zoom button

Shooting button ( )

Orange lamp

Green lamp

Playback button ( )

Menu button ( )

Exposure compensation

button ( )

Macro mode button ( )

Lock button

Reset button ( )

Self-timer button ( )

Erase button ( )

Battery check

Green lamp

Flash standby

Flash mode

Current memory

Shooting mode

Self-timer

Record mode Number of storable

still pictures

AF target mark

Resolution

Print reservation,

Number of prints

Resolution

Battery check

Exposure

compensation

Date and time

Number of frames

Record mode

Protect

Macro mode

Exposure compensation

Current memory

File number

TIPS

QuickStart Guide

D-535 ZOOM / C-370 ZOOM / X-450

Two Corporate Center Drive, PO Box 9058, Melville,

NY 11747-9058, U.S.A.

http://www.olympusamerica.com/support

Wendenstrasse 14-18,

20097 Hamburg, Germany

http://www.olympus-europa.com

http://www.olympus.com/

VT905001

START HERE

It is strongly recommended that you follow these step-by-step

numbered instructions to set up and quickly begin using your

new Digital camera.

PREPARING THE

CAMERA FOR USE

2Press to select the flash

mode, and press .

3When the shutter button is pressed halfway, the mark lights or

blinks.

lights: The flash is ready to fire when the shutter button is fully

depressed.

blinks: The flash is charging. Wait until the mark changes from

brinking status to steady.

Not all flash modes are available depending on the shooting mode

selected. Refer to the Reference Manual for more information.

Icon Flash Mode Description

indication Auto flash The camera automatically decides if the flash is

needed.

Red-eye Reduction

Flash

Reduces incidence of red eyes by emitting pre-

flashes.

Fill-in Flash The flash always fires with every picture.

Flash Off The flash does not fire regardless of the light

conditions.

TIPS

b.Erasing Pictures

Deletes only the picture currently

displayed in the monitor.

Once erased, pictures cannot

be restored. Check each

picture before erasing to avoid

accidentally erasing pictures

you want to keep.

1Display the picture you want to

erase.

2 Press .

3Select [YES], and press .

• The picture will be erased.

The “all-frame erase” function erases all frames stored in the camera. Refer

to the Reference Manual for more information.

Erase button ( )

Arrow pad

( )

OK button ( )

Note

TIPS

CONNECTING THE CAMERA TO A COMPUTER

Olympus makes it simple to connect your camera to a

computer and download pictures.

Olympus recommends using the optional AC adapter to ensure a

consistent power supply when downloading images

a. Installing OLYMPUS Master

1Insert the CD-ROM into the CD-

ROM drive.

• The OLYMPUS Master installation

screen is displayed.

2Click the [OLYMPUS Master] button.

• Installation starts.

• Follow the on-screen instructions

to complete the installation.

For more information on operating environment and installation

procedure of OLYMPUS Master, refer to the Reference Manual.

b.Connecting to a computer

Make sure that the camera is turned off before

connecting it to your computer.

1Make sure the camera is turned off.

• The monitor is off.

• The green lamp and the orange lamp on the camera are off.

• The lens is not extended.

2Plug the USB cable provided with the camera into the USB port

on your computer.

TIPS

Note

Connector cover

USB connectorUSB cableUSB port

Look for this mark.

TAKING PICTURES

Let’s press the shutter button and take a picture – it’s easy.

a. Taking a Picture

1Position the AF target mark on the subject while looking at the

monitor and decide on composition.

Icons representing camera settings appear on the monitor, telling

you important information such as the flash and record modes,

battery life and the number of frames remaining.

2Press the shutter button gently (halfway) to adjust the focus.

• The focus is properly set when the green lamp lights.

• The # indicator lights steadily when the flash is ready to fire.

3Press the shutter button completely to take the picture.

b.Zooming

Use the zoom button to zoom in closer to the subject or zoom

out for a wide-angle shot.

c. Flash Modes

This digital camera features multiple flash modes. Choose

the mode best suited to the shooting conditions and the kind

of picture you want.

1Press .

Green lamp

(Lights when the subject is in

focus)

Flash standby

(Lights when taking pictures

with flash)

AF target mark

(Indicates the area on which

the camera is focused)

Shutter button

Zoom button

TIPS

Press toward T to choose

telephoto shooting and

make the subject bigger.

Press toward W to zoom

out and get everything

into the picture.

Press

Flash mode button ( )

VIEWING AND ERASING

PICTURES

With a digital camera, you can easily view the photos you

want - and delete the ones you don’t.

a. Viewing Pictures

1With the camera in the shooting

mode, press .

• Playback mode is set.

• The last picture taken appears in

the monitor.

Arrow pad

( )

Playback button ( )

2Use the arrow pad to playback other pictures.

• To return to the shooting mode,

press .

Jumps to the picture 10 frames back.

Displays the previous

picture.

Displays the next

picture.

Jumps to the picture 10 frames ahead.

Shooting button ( )

3Plug the other end of the USB cable into the USB connector on

your camera.

•

The camera starts communicating with the PC and the selection

screen for the USB connector is displayed on the camera’s monitor.

4Select [PC], and press .

• When the camera is recognized

by the PC, a new icon appears

on the desktop.

About the functions and

detailed instructions on

how to use them...

See “BASIC MANUAL” to find out the capabilities of

your camera.

Insert the CD-ROM provided with the camera to your PC,

and refer to “REFERENCE MANUAL” on the CD-ROM for

more information.

• Take pictures using the optimal settings according to the

shooting conditions.

• Record movies.

• Increase the maximum number of pictures to take with an

optional xD-Picture Card inserted.

• Play back pictures on your TV using the video cable provided with the camera.

• Use the direct print function, connecting the camera and PictBridge-compatible

printer with the USB cable provided with the camera.

DIGITAL CAMERA

APPAREIL PHOTO NUM

ÉRIQUE

DIGITALKAMERA

CÁMARA DIGITAL

D-535 ZOOM

C-370 ZOOM

X-450

BASIC MANUAL

MANUEL DE BASE

EINFACHE ANLEITUNG

MANUAL BÁSICO

ENGLISH..........2

FRANÇAIS .....40

DEUTSCH ......78

ESPAÑOL ....116

For advanced users

To enjoy the images

on your PC...

Insert the Olympus Master CD-ROM

provided with the camera to your PC, and

enjoy pictures with the OLYMPUS Master

software.

• Play back still pictures and movies.

• Perform the editing such as rotating and trimming of images.

• Manage images using the calendar function.

• Print images easily.

• Make online user registration of camera (confirm that your PC is

connected to Internet beforehand).

Technical Support (USA)

1-888-553-4448 (Toll-free)

8:00 AM - 10:00 PM ET

Monday - Friday

European Technical Customer

Support

00800 - 67 10 83 00 (Toll-free)

+49 180 5 - 67 10 83 or

+49 40 - 237 73 899 (Charged)

9:00 AM - 6:00 PM MET

Monday - Friday

Specyfikacje produktu

Marka:	Olympus
Kategoria:	Aparat cyfrowy
Model:	X-450

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Olympus X-450, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Aparat cyfrowy Olympus

Olympus X-725 Instrukcja

4 Lipca 2024

Olympus Ferrari Digital Model 2004 Instrukcja

4 Lipca 2024

Olympus Camedia C-360 Instrukcja

4 Lipca 2024

Olympus VG-180 Instrukcja

4 Lipca 2024

Olympus Camedia C-740 Ultra ZOOM Instrukcja

4 Lipca 2024

Olympus x 30 Instrukcja

4 Lipca 2024

Olympus Camedia X 350 Instrukcja

4 Lipca 2024

Olympus x 760 Instrukcja

4 Lipca 2024

Olympus VG-120 Instrukcja

4 Lipca 2024

Olympus Stylus 1000 Quick Start Guide Instrukcja

4 Lipca 2024

Instrukcje Aparat cyfrowy

Najnowsze instrukcje dla Aparat cyfrowy

Oregon Scientific atc 2 k Instrukcja

28 Września 2024

Oregon Scientific ATC3K Action Camera Instrukcja

28 Września 2024

Oregon Scientific atc 3000 atc3k action kamera Instrukcja

28 Września 2024

Oregon Scientific atc 2000 action kamera Instrukcja

28 Września 2024

Oregon Scientific ATCMini action camera Instrukcja

28 Września 2024

Oregon Scientific ATC-2000 Instrukcja

28 Września 2024

General Electric A1030 Instrukcja

28 Września 2024

General Electric E1030 Instrukcja

28 Września 2024

General Electric E1040 Instrukcja

28 Września 2024

General Electric E1050 Instrukcja

28 Września 2024