Instrukcja obsługi OKI Microline 420N

OKI Printer Microline 420N

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla OKI Microline 420N (97 stron) w kategorii Printer. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/97
User’s
Guide
59348301
2
ML 420/421 User’s Guide
P/N 59348301, Revision 1.2
February, 2006
Every effort has been made to ensure that the information in
this document is complete, accurate, and up-to-date. Oki Data
assumes no responsibility for the results of errors beyond its
control. Oki Data also cannot guarantee that changes in
software and equipment made by other manufacturers and
referred to in this guide will not affect the applicability of the
information in it. Mention of software products manufactured
by other companies does not necessarily constitute
endorsement by Oki Data.
Copyright 2002, 200 by Oki Data. All rights reserved.7
Written and produced by the Oki Data Training and
Publications Department.
Web Site: http://www.okiprintingsolutions.com.
Trademark Information
OKI and MICROLINE are registered
trademarks of Oki Electric Industry
Company, Ltd.
Epson is a registered trademark of Epson America, Inc.
IBM is a registered trademark of International Business Machines
Corp.
Microsoft and Windows are either registered trademarks or
trademarks of Microsoft Corporation in the United States and
other countries.
3
Safety
Your Oki printer has been carefully designed to give you years
of safe, reliable performance. As with all electrical equipment,
there are a few basic precautions you should take to avoid
hurting yourself or damaging the printer:
Carefully read all setup and operating instructions. Be sure
to save all documents for future reference.
Read and follow all warning and instruction labels on the
printer itself.
Place your printer on a firm, solid surface. If you put in on
something unsteady, it might fall and be damaged.
Avoid overheating the printer. Do not place it on a soft
surface, such as a rug, sofa, or bed. The vents may be
blocked, causing the printer to overheat.
The printer must be installed near a power outlet which will
remain easily accessible.
Be certain that your power source matches the rating listed
on the back of the printer. If you aren’t sure, check with your
dealer or with your local power company.
Your printer has a grounded, 3-prong plug as a safety feature.
It will only fit into a grounded outlet. If you can not plug it
in, chances are that you have an older, non-grounded outlet.
Contact an electrician to have it replaced with a grounded
outlet. Do not use an adapter to defeat the grounding.
To avoid damaging the power cord, do not put anything on it
or place it where it will be walked on. If the cord becomes
damaged or frayed, replace it immediately.
If you’re using an extension cord or power strip with the
printer, make sure that the total of the amperes required by all
the equipment on the extension is less than the extensions
rating. Generally, the total ratings of all equipment plugged
into any one power line should not exceed 15 amperes. Don’t
exceed this unless you know that the power line your
equipment is plugged into has a rating above 15 amperes.

Specyfikacje produktu

Marka: OKI
Kategoria: Printer
Model: Microline 420N

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z OKI Microline 420N, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Printer OKI

OKI

OKI C800 series Instrukcja

15 Września 2024
OKI

OKI C910dn Instrukcja

15 Września 2024
OKI

OKI Microline 420N Instrukcja

15 Września 2024
OKI

OKI C710N Instrukcja

13 Września 2024
OKI

OKI B930dtn Instrukcja

7 Września 2024
OKI

OKI C510 Instrukcja

6 Września 2024
OKI

OKI C911 Instrukcja

5 Września 2024
OKI

OKI ES9410DMe Instrukcja

4 Września 2024
OKI

OKI B4250 Instrukcja

30 Sierpnia 2024
OKI

OKI B4200 Instrukcja

29 Sierpnia 2024

Instrukcje Printer

Najnowsze instrukcje dla Printer

TSC

TSC DA210 Instrukcja

20 Września 2024
TSC

TSC MX240P Instrukcja

19 Września 2024
Sharp

Sharp MX-M202D Instrukcja

19 Września 2024
Dell

Dell 944 All In One Instrukcja

19 Września 2024
TSC

TSC Alpha-2R Instrukcja

18 Września 2024
Roland

Roland GX-24 Instrukcja

16 Września 2024