Instrukcja obsługi OKI B710
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla OKI B710 (51 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/51
B700 Series
B710
B720
B730
Preface > 2
P
REFACE
Every effort has been made to ensure that the information in this document is complete,
accurate, and up-to-date. The manufacturer assumes no responsibility for the results of
errors beyond its control. The manufacturer also cannot guarantee that changes in software
and equipment made by other manufacturers and referred to in this guide will not affect
the applicability of the information in it. Mention of software products manufactured by
other companies does not necessarily constitute endorsement by the manufacturer.
While all reasonable efforts have been made to make this document as accurate and helpful
as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or
completeness of the information contained herein.
The most up-to-date drivers and manuals are available from:
http://www.okiprintingsolutions.com
07108901 Iss.01, Copyright © 2010 Oki Europe Ltd. All rights reserved.
Oki is a registered trademark of Oki Electric Industry Company, Ltd.
Oki Printing Solutions is a trademark of Oki Data Corporation.
Energy Star is a trademark of the United States Environmental Protection Agency.
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
Apple, Macintosh, Mac and Mac OS are trademarks of Apple Inc.
Other product names and brand names are registered trademarks or trademarks of their
proprietors.
As an Energy Star Program Participant, the manufacturer has determined that
this product meets the Energy Star guidelines for energy efficiency.
B720n and B730n achieve Energy Star energy savings; product fully qualifies
when packaged (or used) with a duplex unit.
This product complies with the requirements of the Council Directives 2004/
108/EC (EMC), 2006/95/EC (LVD) and 2009/125/EC (EuP), as amended where
applicable, on the approximation of the laws of the member states relating to
Electromagnetic Compatibility, Low Voltage and Energy Using Products.
The following cables were used to evaluate this product to achieve EMC directive
2004/108/EC compliance and configurations other than this may affect that compliance.
B710n ✔B720n ✘B730n ✘
B710dn ✔B720dn ✔B730dn ✔
CABLE TYPE LENGTH
(METRE)
CORE SHIELD
Power 2.0 ✘ ✘
USB 3.0 ✔ ✘
Serial 3.0 ✔ ✘
Parallel 3.0 ✔ ✘
LAN 3.0 ✔ ✘
Emergency first aid > 3
E
MERGENCY
FIRST
AID
Take care with toner powder:
If swallowed, give small amounts of cold water and seek medical
attention. DO NOT attempt to induce vomiting.
If inhaled, move the person to an open area for fresh air. Seek medical
attention.
If it gets into the eyes, flush with large amounts of water for at least
15 minutes keeping eyelids open. Seek medical attention.
Spillages should be treated with cold water and soap to help reduce
risk of staining skin or clothing.
M
ANUFACTURER
/I
MPORTER
TO
THE
EU/
AUTHORISED
REPRESENTATIVE
Oki Europe Limited (trading as Oki Printing Solutions)
Blays House
Wick Road
Egham
Surrey, TW20 0HJ
United Kingdom
For all sales, support and general enquiries contact your local distributor.
E
NVIRONMENTAL
INFORMATION
Contents > 4
C
ONTENTS
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Emergency first aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Manufacturer/Importer to the EU/authorised representative . . . . . . . . .3
Environmental information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Notes, cautions and warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Documentation suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
On-line usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Printing Pages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Main Components and Their Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Standard Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
With Optional Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Internal View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Switching On and Off the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Switching On the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Switching Off the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Power Save Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Exiting the Power Save Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Cancelling/Checking Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Cancelling Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Checking Status of Print Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Displaying Optional Accessory Configuration and Paper Tray Settings . . . . .14
USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
About this Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Control Panel Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Print Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Menu Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Navigating the Control Panel Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Changing the Display and Reporting Language . . . . . . . . . . . . . . . . . . . . .17
Printing the menu map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
How to change password - Administrator . . . . . . . . . . . . . . . . . . . . . . . . .17
Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Printing options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Printing From the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Useful Print Features In Properties Dialog Box . . . . . . . . . . . . . . . . . . .18
Setting media types. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Envelopes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Loading and printing on Envelopes . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Transparencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Loading and Printing on Transparencies . . . . . . . . . . . . . . . . . . . . . . . .20
Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Loading and printing on labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Printing on Custom Size Paper/Long Paper . . . . . . . . . . . . . . . . . . . . . . . .22
Loading Custom Size Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Setting Custom Paper Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Printing on Custom Size Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Contents > 5
Special Printing Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Print Confidential Document - Secure Print . . . . . . . . . . . . . . . . . . . . . .24
Stored Job . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Proof Print - Print After Checking Printing Result . . . . . . . . . . . . . . . . . .24
Print at a Specified Time - Timed Job . . . . . . . . . . . . . . . . . . . . . . . . . .25
Direct Printing of PDF Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Printing via Electronic Mail - E-mail Printing . . . . . . . . . . . . . . . . . . . . .25
Barcode Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Printing files from a USB flash drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Cassette trays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
When Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Inside Cover A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Inside Paper Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Inside Cover B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Inside Cover C (Duplex Unit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Inside Cover D (Offset Catch Trays) . . . . . . . . . . . . . . . . . . . . . . . . . .33
When Problems Occur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
When the Print Quality is Poor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Network Related Troubles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Using TCP/IP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Daily Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Drum/Toner Cartridge Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Caution on Handling the Drum/Toner Cartridge. . . . . . . . . . . . . . . . . . .39
Replacing the Drum/Toner Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . .39
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Cleaning the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Cleaning the Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Cleaning the Interior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Cleaning the feed rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
When Moving the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Oki contact details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Notes, cautions and warnings > 6
N
OTES
,
CAUTIONS
AND
WARNINGS
For the protection of your product, and in order to ensure that you benefit from its full
functionality, this model has been designed to operate only with genuine original toner
cartridges. Any other toner cartridge may not operate at all, even if it is described as
“compatible”, and if it does work, your product's performance and print quality may be
degraded.
Use of non-genuine products may invalidate your warranty.
Specifications subject to change without notice. All trademarks acknowledged.
NOTE
A note provides additional information to supplement the main text.
CAUTION!
A caution provides additional information which, if ignored, may
result in equipment malfunction or damage.
WARNING!
A warning provides additional information which, if ignored, may
result in a risk of personal injury.
About this guide > 8
P
RINTING
P
AGES
The whole manual, Individual pages, or sections may be printed. The procedure is:
1. From the toolbar, select File > Print (or press the Ctrl + P keys).
2. Choose which pages you wish to print:
(a) All pages, (1), for the entire manual.
(b) Current page, (2), for the page at which you are looking.
(c) Pages from and to, (3), for the range of pages you specify by entering their
page numbers.
(d) Click OK.
Basic Operations > 9
B
ASIC
O
PERATIONS
M
AIN
C
OMPONENTS
AND
T
HEIR
F
UNCTIONS
S
TANDARD
C
ONFIGURATION
NO. NAME DESCRIPTION
1. Centre output
tray
Print jobs are output here with the printed side
facing down.
2. Control panel Consists of the essential operation buttons,
indicators and display.
3. Ventilation
hole
Releases heat to prevent the interior of the
printer from heating up. Do not block.
4. Paper meter A meter to check the amount of remaining
paper. Attached to the 550 tray.
5. Tray 1 Sets the 150 tray.
6. Tray 2 Sets the 550 tray.
7. Power switch Switches the power of the printer on and off.
Pressing the switch to the <|> position switches
it on and pressing it to the <0> position
switches it off.
8. Paper
extension
Raise this when printing on paper larger than
Letter/A4 size.
9. Host USB port For connecting the USB Flash Drive.
10. Power cord
cable
connector
For connecting the power cord cable.
11. Parallel
connector
For connecting the parallel cable.
12. Network
connector
For connecting the network cable when
connecting this printer to the network for use.
13. USB connector For connecting the USB cable.
10
11
12
13
14
15
3
3
3
12
3
4567
8
9
Basic Operations > 10
W
ITH
O
PTIONAL
A
CCESSORIES
14. Serial
connector
For connecting the serial cable.
15. Duplex unit
connector
For connecting the optional duplex unit.
NO. NAME DESCRIPTION
1. Offset catch
tray (optional)
Allows you to stagger the output position for
each print job (offset output).
2. Cover D
(optional)
Open this when paper is jammed inside the
offset catch tray.
3. Rear tray
(optional)
Use this tray if you want to reduce curling of
paper when printing heavyweight paper. Print
jobs are output here with the printed side
facing up.
4. Duplex unit
(Cover C)
Enables 2 sided printing. When paper is
jammed inside the duplex unit, it is described
as cover C.
5. Rear output
tray lever
When the rear tray has been installed, the
paper output location can be switched between
it and the centre output tray. Raise the lever to
output to the rear tray and lower the lever to
output to the centre output tray.
6. A4 universal
tray (optional
Tray3 and
Tray4)
Can install up to two levels of an Letter/A4
universal tray (550) to this printer.
7. Right
detachable
cover
Remove this when installing optional
accessories such as hard disk, compact flash
and additional DDR memory module.
NO. NAME DESCRIPTION
12
3
4
56
7
Basic Operations > 11
I
NTERNAL
V
IEW
NO. NAME DESCRIPTION
1. Paper
extension
Raise this when printing on paper larger than A4
size.
2. Drum/toner
cartridge
Contains the toner and the photosensitive
drum.
3. Cover A Open this when replacing the drum/toner
cartridge and removing jammed paper.
4. Fuser unit Fixes the toner on the paper. Do not touch this
when using the printer as it is hot.
5. Transfer roll
cartridge
Transfers the toner image on the surface of the
photosensitive drum to the paper.
6. Cover B Open this when removing jammed paper.
1 2 3 4
56
Basic Operations > 12
S
WITCHING
O
N
AND
O
FF
THE
P
OWER
S
WITCHING
O
N
THE
P
OWER
1. Press the power switch of the printer to the <|> position.
2. When the power is switched on, various screens will be displayed on the control
panel. Check that this display changes to Ready To Print.
S
WITCHING
O
FF
THE
P
OWER
1. By checking the display on the control panel, confirm that the printer is not
processing any data. Ready To Print Power Save or must be displayed.
2. Press the power switch to the <O> position to switch the power off.
NOTE
If error message is displayed, refer to the Message List in the Reference Guide
for guidance on how to fix it.
NOTE
>Do not switch off the printer power when printing is in progress. It may
lead to a paper jam.
>Once the power is switched off, print data remaining in this printer or
information saved in the memory of this printer will be deleted.
Basic Operations > 13
P
OWER
S
AVE
M
ODE
This printer is equipped with a Power Save mode to reduce power consumption when it is
left idle. The default idle time from last print activity until the printer enters Power Save
mode is 5 minutes. This time can be adjusted by the operator to any of the following: 5,
15, 30, 60 or 120 minutes.
When no print data is received within 5 minutes (default) since the last page is printed, the
printer will enter Power Save mode. An informative message is displayed on the control
panel indicating Power Save Mode. Consumption of power during Power Save mode is 10
Watts or less, and the time required to exit from Power Save mode to a print-ready status
is about 10 seconds.
E
XITING
THE
P
OWER
S
AVE
M
ODE
The printer automatically exits from Power Save mode once it receives data from the
computer or if any key on the control panel is pressed.
C
ANCELLING
/C
HECKING
P
RINTING
C
ANCELLING
P
RINTING
To cancel printing, you can either cancel the print job at this printer or at the computer.
Cancelling a Print Job at the Printer
Press the CANCEL button then press the ON LINE button on the control panel. However,
pages being printed at the moment will continue to be printed.
Cancelling Print Jobs at the Computer
Double-click the printer icon at the bottom right of the taskbar in Windows.
From the displayed window, right click the document name that you wish to delete and click
the DELETE key.
C
HECKING
S
TATUS
OF
P
RINT
D
ATA
Checking in Windows
Double-click the printer icon on the task bar at the bottom right of the screen.
From the displayed window, check the column, Status.
Basic Operations > 14
D
ISPLAYING
O
PTIONAL
A
CCESSORY
C
ONFIGURATION
AND
P
APER
T
RAY
S
ETTINGS
When using this printer as a network printer and with SNMP protocol enabled, you can
display on the printer driver, the optional accessory configuration and settings configured
at the control panel such as paper type or size. These settings are displayed on the Options
tab. This section explains the procedure using Windows XP as an example.
1. From the Start menu, click Printers and Faxes and then display the properties of
the printer to be used.
2. Select this printer, right click and select Properties.
3. Click the Device Options tab.
4. Click Get Information from Printer.
5. Click OK.
6. The contents of the Device Options tab will be updated based on the data obtained
from the printer.
USB F
LASH
D
RIVE
You can print PDF files up to PDF version 1.6 directly from a standard USB flash drive
without any connection to a host computer. See “Printing files from a USB flash drive” on
page 25.
NOTE
>When using USB or Parallel connection to this printer, this feature cannot
be used. You have to manually set the items on the printer driver.
>The rear tray information cannot be obtained. You have to manually set
the item.
>For paper size and paper type settings, you must configure them at the
control panel beforehand. Even if you change the settings here, they will
not be reflected on the printer itself.
>When using this feature, you have to activate the SNMP port (default:
Enable) on the printer using the control panel.
>Only users with administrator’s rights can change the settings. Users
without administrator’s rights can only check the contents.
NOTE
The properties of the printer can be displayed on the printer driver.
Control Panel > 15
C
ONTROL
P
ANEL
A
BOUT
THIS
C
HAPTER
This chapter introduces the control panel and its functions, and also demonstrates how to
navigate through the control panel menus and submenus that allow you to view and change
the printer settings.
C
ONTROL
P
ANEL
F
EATURES
The control panel is located on the front of the printer and contains the display (LCD),
indicators and push buttons that allow you to view and change the printer settings.
NO. NAME DESCRIPTION
1. Host USB port For printing PDF and other files from a USB
flash drive.
2. READY indicator When the light is on, the printer is ready to
receive data from the computer.
3. ATTENTION
indicator
When the light is on, there is a malfunction
in the printer. Operator intervention is
required.
4. LCD Displays the setting items, machine status,
and messages.
5. BACK button Press to move back a step in the Menu
structure.
6. MENU up button Press to enter Menu screen.
Press to move to menu operation.Once in
the menu operation, repeatedly pressing
the menu button moves down the menu
list.
7. MENU down
button
Press to enter Menu screen.
Press these to move to the required menu,
item and candidate value on the display.
8. ENTER button Press to select the currently displayed menu
setting. When you are changing the
candidate values, pressing the ENTER
button runs the currently displayed activity
or saves the currently displayed candidate.
#
#
#
##
9
9
9
99
6
6
6
66
3
3
3
33
1
1
1
11
4
4
4
44
7
7
7
77
*
*
*
** 0
0
0
00
8
8
8
88
5
5
5
55
2
2
2
22
WXYZTUVPQRS
MNOJKLGHI
DEFABC
At
tention
Ready
Menu
Back Enter
On Line
Cancel
Help
12
3
4 5 689
10 11
12
7
Control Panel > 16
D
ISPLAY
There are two types of screens shown: Print screen (for displaying printer status) and Menu
screen (for setting configuration).
P
RINT
S
CREEN
The Print screen appears when the machine is printing or waiting for data. The following
contents are shown on the screen.
>Current printer status— e.g. Ready To Print, Printing, etc.
>Port receiving data— Which printer port is currently receiving print data, e.g. USB,
Net, etc.
>Emulation— Which page description language emulation is currently in use, e.g. PCL,
PS, etc.
>Toner status bar — How much toner is remaining.
M
ENU
S
CREEN
Screen for configuring settings related to the printer. This screen appears when you press
the MENU buttons. The first of a list of menu appears, and further depressions of the up
button or down button cycles through the available printers menus.
N
AVIGATING
THE
C
ONTROL
P
ANEL
M
ENUS
To navigate the control panel menus, do the following:
1. Press the MENU button to enter the Menu.
2. Use the up and down buttons on the control panel to scroll through the menus.
When the item you want to change is displayed, press ENTER to view the submenus
for that item.
3. downUse the up and buttons to scroll through the submenu items. When the item
you want to change is displayed, press ENTER to display the setting.
4. Use the up and down buttons to move up and down through the available settings
for the submenu item. When the item you want to change is displayed, press ENTER
9. ON LINE button Press to enter the off-line status. When in
the off-line status, the machine cannot
receive data or process printing. Press
again to exit the off-line status and enter
the on-line status (where the machine can
receive data from the computer).
10. CANCEL button Press to cancel printing.
Press to exit Menu Mode.
11. HELP button When an error occurs, a message is
displayed on the LCD to press the Help
button for more information on available
Help screens.
12. Keypad Use to enter numbers, upper-case/lower-
case letters and symbols in the Entry Line.
NOTE
The message displayed differs according to the options installed and setting
status.
NO. NAME DESCRIPTION
Control Panel > 17
to select the setting. An asterisk (*) will appear next to the setting indicating that
this setting is currently in effect.
5. Do one of the following:
>Press the BACK button to move up to the list of menus;
or...
>Press ON LINE or CANCEL to exit from the menu system.
C
HANGING
THE
D
ISPLAY
AND
R
EPORTING
L
ANGUAGE
The default language for display messages and printed reports is English. You can change
this to a different language as follows.
1. Press the MENU button on the control panel to enter the Menu.
2. Press the down button scroll to Menus and press the ENTER button to select.
3. Press the down button to Sys Config Menu and press the ENTER button to select.
4. Press the down button to scroll to the Language submenu and press the ENTER
button.
5. Press the down button to scroll to the language you want and press the ENTER
button. An asterisk (*) appears next to the selected language.
6. Do one of the following:
>Press the BACK button to move up to the list of menus;
or...
>Press ON LINE or CANCEL button to exit from the menu system.
P
RINTING
THE
MENU
MAP
To print a menu map from the control panel on your printer:
1. Press the MENU button on the control panel.
2. Press the down button to scroll to Information Menu and press the ENTER button.
3. Press the down button to scroll to Print Menu Map and press the ENTER button.
4. Press the ENTER button to execute the printing of the Menu map.
H
OW
TO
CHANGE
PASSWORD
- A
DMINISTRATOR
You can set each category in the user menu and also restrict access to change these
settings. The administrator settings are password protected. Refer to the Reference Guide
for details on how to change the administrator password.
Printing > 18
P
RINTING
P
RINTING
OPTIONS
This printer offers three ways to modify the printing options:
>Control Panel
>Printer Driver
>Embedded Web Server
The printing options on the printer driver can be accessed through the application you are
using or through the Printer and Faxes Menu (on Windows). The Embedded Web Server
(EWS) contains access to all printer features and presents them as HTML pages. EWS can
be accessed from any remote station via HTTP access.
Refer to the Reference Guide for details on how to access the EWS.
P
RINTING
F
ROM
THE
C
OMPUTER
This section explains the basic flow when printing from application software in a Windows®
environment.The procedure may differ according to the computer or system configuration
used.
This section explains printing with the PCL driver as an example.
1. From the File menu of the application software, select Print.
2. Select this printer as the printer to be used to start printing. To use the various print
features of this printer, display the printer properties dialog box to set the necessary
items.
For details on each item and how to set them, refer to the Online Help for the printer
driver.
U
SEFUL
P
RINT
F
EATURES
I
N
P
ROPERTIES
D
IALOG
B
OX
>The following selections are available in the Setup tab: Paper Size, Media Type,
Paper Source, Paper Destination Paper Feed Options*, Finishing Mode**, and 2-
sided Printing.
*Paper Feed Options include: Auto Resize, Covers, Auto Tray Change, Media Check,
and Skip Blank Pages, Tray 1 Settings, and Media Type.
NOTE
>If there is a conflict between the settings in the Control Panel, Printing
Preferences or Embedded Web Server and printer settings set via your
application, the application settings supersede any other setting.
>The EWS facility is only available when the printer is connected to the
network.
NOTE
Do not switch off the power to the printer when printing is in progress. It may
lead to a paper jam.
NOTE
If the paper tray information is not correct, change the settings on the Setup
tab of the printer driver before continuing. For details on how to change the
settings, refer to the Online Help for the printer driver.
Printing > 19
**Finishing Mode includes: Standard, 2-up, 4-up, 6-up, 8-up, 9-up, 16-up,
PosterPrint, and Booklet.
S
ETTING
MEDIA
TYPES
The printer can accommodate a variety of special media. Each media type requires special
handling. The most convenient way to set the media is using the Printer Properties in your
computer. You can also set the media via the control panel or using the Embedded Web
Server (EWS).
E
NVELOPES
Envelopes can be printed from all trays. For details on the envelopes that can be used, refer
to the Reference Guide. The procedure to print on envelopes is as follows.
L
OADING
AND
PRINTING
ON
E
NVELOPES
Take note of the following points when loading an envelope:
>Use envelopes specifically made for laser printers.
>The reverse side of the envelope cannot be printed on.
>Do not load more than 15 envelopes in Tray 1 or more than 80 envelopes in Trays
2, 3 and 4.
>Close the flaps of the envelopes and load them with the address side facing up
and the flap side down as shown below.
NOTE
You can set the print features in the properties dialog box from the printer icon
by selecting Printers and Faxes (or Settings) > Printers depending on the OS).
See the Reference Guide for detailed information on features in the Printer
Driver.
CAUTION!
The heat from the fuser can melt some adhesives and possibly
damage your printer.
Printing > 20
1. Load the envelopes in the portrait orientation so that the flaps are turned to the right
side.
2. Slide the length guide and right width guide to the size of the loaded envelopes.
3. On the control panel, change the paper type to Envelope.
4. On the control panel, change the paper size of the tray to match the type of
envelope loaded.
5. From the File menu, select Print.
6. Select this printer from the drop down list and click Properties.
7. Select the loaded paper tray from Source or click the Media Type and then select
Envelope.
8. Click OK.
9. Click Print in the Print dialog box to start printing.
T
RANSPARENCIES
You can print on transparencies from any tray.
L
OADING
AND
P
RINTING
ON
T
RANSPARENCIES
The way to load transparencies in the paper tray is the same as the way to load standard
size paper. For details refer to “Loading Paper” on page 27. However before loading
transparencies consider the following points:
>Remove all other media before loading transparencies into the tray.
>Do not load transparencies above the fill line; this may cause the printer to jam.
>Handle transparencies by the edges to avoid fingerprints and creases that can
cause poor print quality.
>Do not use transparencies with the stripes side down.
>Do not print duplex on transparencies.
>Only use transparencies that are designed to withstand heat required for laser
printing.
NOTE
>Place C5 envelopes short-edge feed in the tray.
NOTE
>You will have to switch off Auto Sense to change settings.
>You can also change the settings using the EWS.
Printing > 21
>Transparencies with white frames or full-colour transparencies cannot be used.
1. Fan the transparencies to ensure that all sheets are separated.
2. Insert them with the short-edge feed.
3. Slide the length guide and right width guide to the size of the loaded transparencies.
4. On the control panel, change the paper type to Transparency.
5. From the File menu, select Print.
6. Select this printer as the printer to be used and click Properties.
7. Click the Media Type drop down box and click on Transparencies.
8. From the Source drop down select the loaded paper tray.
9. Click the Paper Size drop down and select the size of the original document.
10. Click OK.
11. Click Print in the Print dialog box to start printing.
L
ABELS
You can print labels from any tray.
L
OADING
AND
PRINTING
ON
LABELS
Before loading the labels in the tray, consider the following points:
>Use labels specifically made for laser printers.
>Print only on one side of the sheet of labels.
>Do not load more than 100 labels sheets in Tray 1 or more than 290 in Tray 2, 3
and 4.
>Do not load labels above the fill line; this may cause the printer to jam.
1. Insert the label sheets short-edge feed and face up.
2. Slide the length guide and right width guide to the size of the loaded label sheets.
3. On the control panel, change the paper type to Labels.
4. From the File menu, select Print.
5. Select this printer as the printer to be used and click Properties.
6. Click the Media Type drop down box and click on Labels.
NOTE
Printing transparencies continuously may lead to the output transparencies
sticking to each other. As a guide, remove the transparencies from the output
tray after about 20 sheets and then fan them to lower their temperatures.
NOTE
>You must set Auto-sense to Off before setting the paper type.
>You can also change the settings using the EWS.
NOTE
>You must set Auto-sense to Off before setting the paper type.
>You can also change the settings using the EWS.
Printing > 22
7. From the Source drop down select the loaded paper tray.
8. Click the Paper Size drop down and select the size of the original document.
9. Click OK.
10. Click Print in the Print dialog box to start printing.
P
RINTING
ON
C
USTOM
S
IZE
P
APER
/L
ONG
P
APER
This section explains how to print on custom size paper such as long paper.
The paper sizes that can be set on this printer are as follows:
a. Paper that extends beyond 356 mm (14 in.), the print quality on that part of the paper cannot be
guaranteed.
L
OADING
C
USTOM
S
IZE
P
APER
The way to load custom size paper with the long edge shorter than 356 mm in trays 1 to 4
is the same as loading standard size paper. For details, refer to “Loading Paper” on
page 27.
To load long paper in Tray1, follow the procedure below:
1. Pull the paper tray out to its maximum.
NOTE
>The custom paper size has to be set on the control panel and the printer
driver, refer to “Setting Custom Paper Sizes” on page 23.
>You must set Auto-sense to Off before setting the paper type.
>To load long-size paper with the long edge exceeding 356mm, load the
paper with the edge protruding from the tray.
TRAY LONG EDGE SHORT EDGE
Tray 1 215.9 - 1219.2mm (8.5 - 48in)a76.2 - 127mm (3 - 5in)
Tray 2, 3 and 4 215.9 - 355.6mm (8.5 - 14in)a98.4 - 148mm (3.875 - 5.83in)
NOTE
Pull the extendable part out to its maximum. For details on the procedure to
extend the paper tray, refer to “Loading Paper” on page 27.
Printing > 23
2. Load the paper with the side to be printed facing up. Curl up the back end of the
paper so that it will not fall from the tray.
3. Push the paper tray completely into the printer.
S
ETTING
C
USTOM
P
APER
S
IZES
Before printing, set the custom size on the printer driver.
You have to configure the settings on the control panel too when loading custom size paper
in Trays 1 to 4 for printing. For details on setting the control panel, refer to Setting Custom
Paper Sizes in the Reference Guide.
On the printer driver, set the custom size in the Paper Size dialog box. This section
explains the procedure using Windows XP as an example.
1. From the File menu, click Print.
2. Select Properties then select the Setup tab.
3. Select Option as needed: Source, Media Type, etc.
4. You may select a previously stored custom size from the list or you may add an
additional custom size.
5. To add a new custom size:
(a) Select Paper Feed Options.
(b) Click Custom Size.
(c) In the Name Field, Type a name for your custom size.
(d) Click on the Unit of measure radio button for the units you would like to use
(mm for millimetres or inch for inches.)
(e) In the Width field, enter the width of the custom size paper.
(f) In the Length field, enter the length of the custom size paper.
(g) Click Add to store the new custom size.
CAUTION!
When setting the paper size on the printer driver and the control
panel, specify the size of the actual paper used. Setting the wrong
size for printing will cause jam detection. This is especially true if
you configure a bigger size when using a narrow width paper.
NOTE
Only users with administrator’s rights can change the settings. Users without
the rights can only check the contents.
Printing > 24
(h) Click OK to close the Dialog Box.
P
RINTING
ON
C
USTOM
S
IZE
P
APER
The procedure to print on custom size paper is as follows.
1. From the File menu, select Print.
2. Select this printer as the printer to be used and click Preferences.
3. Click the Setup tab.
4. Select the appropriate tray from Source.
5. From Paper Size, select the size of the original document.
6. From Media Types, select the registered custom size, and then click OK.
7. Click Print in the Print dialog box to start printing.
S
PECIAL
P
RINTING
F
EATURES
Detailed instructions on how to use these features are contained in the Reference Guide.
P
RINT
C
ONFIDENTIAL
D
OCUMENT
- S
ECURE
P
RINT
Secure Print is a feature that allows you to attach a password to a print job on the
computer, send it to the printer for temporary storage, and then print the job from the
printer control panel. When the printing of a Secure Print job is complete, the job is
automatically deleted.
S
TORED
J
OB
A stored job is the same as a secure print job except that it is not deleted from the storage
device after it is printed unless you specifically ask for this at the printer control panel. By
storing frequently-used data in the printer, you can print the job from the printer control
panel, without sending it from the computer again and again.
P
ROOF
P
RINT
- P
RINT
A
FTER
C
HECKING
P
RINTING
R
ESULT
Proof Print is a feature that allows you to store the print data of multiple copies in the hard
disk or compact flash, print out only the first set to check the print result and if satisfactory,
print the remaining copies from the control panel.
NOTE
>You may use the Modify selection to change a previously stored custom
size.
>You may use the Delete Selection to delete a previously stored custom
size.
NOTE
The way to display the printer properties dialog box differs according to the
application software. Refer to the manual of your respective application
software.
NOTE
>Use of some of these features requires the optional hard disk or compact
flash installed in the printer.
>The hard disk may be damaged and erase important data saved in the
hard disk. We recommend you back up your data.
Printing > 25
P
RINT
AT
A
S
PECIFIED
T
IME
- T
IMED
J
OB
The delayed print feature allows you to store the data in the printer beforehand and then
print it out automatically at the specified time.
D
IRECT
P
RINTING
OF
PDF F
ILES
You can send a PDF file directly to the printer for printing without using the printer driver.
As the print data is sent directly to the printer, the printing process is simpler than printing
with the printer driver and it is done at a faster speed.
P
RINTING
VIA
E
LECTRONIC
M
AIL
- E-
MAIL
P
RINTING
When the optional hard disk or compact flash has been installed and the printer is
connected to a network, enabling it to receive e-mails via TCP/IP communication, e-mails
can be sent from the computer to this printer.
Printing of e-mail contents and TIFF or PDF attachments can be done from this printer.
This feature may need to be enabled via the webpage under Networking/Receive Settings.
B
ARCODE
P
RINTING
This printer uses standard PCL font selection commands to enable printing of algorithm
generated bar codes.
Benefits:
>Any size barcode generation
>Automatically generates checksums
>Automatically adds stop and start characters
Intelligent barcoding
Unlike some barcode solutions, which merely add fonts to a PC or printer, this printer
actually extends the PCL5 language. Barcode formatting, error detection and checksum
calculation are performed by the printer, reducing the load on the host and the network.
Barcodes can be printed in almost any size or rotation, bar width and height. Caption text
can be embedded in the bars or printed above or below the bars in a variety of fonts and
sizes.
See the Reference Guide for detailed use information on all the above printing features.
P
RINTING
FILES
FROM
A
USB
FLASH
DRIVE
The Host USB connector on the control panel can be used to connect a USB Flash Drive.
You can print directly from the USB FLash drive. The files stored in the Flash Drive must be
of the following formats:
>Supported PDF (upto v1.6)
>PCL5, PCL6, FX80 or PostScript
>Generic Text (e.g. .txt file)
NOTE
You may not be able to print some PDF files directly by the printer due to the
way they were created. When this happens, open the PDF files and use the
printer driver to print them.
Printing > 26
The size of the PDF files is limited to the space available in the standard User Flash memory
unless a Compact Flash or Hard Disk Option is installed. The PDF file can be placed in the
root directory or sub-directory in the USB Flash Drive.
To print a PDF file:
1. Press the ON LINE button to return the printer to online status.
2. Plug the USB Flash Drive into the Host USB Connector on the control panel.
A brief beep tone is made by the printer on recognising the USB Flash Drive.
The USB Drive menu is displayed.
3. In the submenus, Print option is selected by default. Press the ENTER button.
A list of files stored in the USB Flash Drive is displayed.
4. Use the up and down buttons to select the file you want to print and press ENTER.
5. At the No. of Copies prompt, using the keypad enter the number of copies and
press ENTER.
The file is now printed.
Once the printing is complete, the printer is returned to Ready To Print status. You can
now remove the USB Flash Drive.
To cancel a print job:
1. Press CANCEL on the control panel.
The message On Line to accept is displayed.
2. Press the ON LINE button.
Printing is cancelled and the printer is returned to status.Ready To Print
NOTE
If the printer is in Power Save Mode when plugging in the USB Flash Drive the
printer will not recognise it.
NOTE
If files are placed in a directory, DIR is displayed after the name. Press ENTER
to enter the directory.
NOTE
The default value of number of copies is set to 1.
Loading Paper > 27
L
OADING
P
APER
C
ASSETTE
TRAYS
a.Standard sizes that can be automatically detected.
b.Requires the paper size to be set on the control panel.
1. Place the paper tray on a flat surface and remove the lid (if installed).
2. If the base plate of the paper tray is raised, push it down.
3. When loading paper longer than A4 size, slide the left and right lock tabs in the
paper tray outwards to unlock them.
SIZE DIMENSIONS WEIGHT LOADING
CAPACITY
Tray 1 A5, B5, A4, Executive, Letter.
Legal13, Legal 14 a
64 - 216 g/m2150 sheets @ 75 g/m2
Statement
A6, Envelopes: COM-9, COM-10,
Monarch, DL, C5 b
Tray 2
and
Optional
Trays 3
and 4
Same as Tray 1
64 - 216 g/m2550 sheets @ 75 g/m2
Loading Paper > 28
4. Hold the grip of the paper tray and pull its extendable part to the front until it
reaches its maximum.
5. Squeeze the length guide and slide it to the desired paper size (1). Squeeze the
right width guide and slide it to the desired paper size (2).
6. Load the paper with the side to be printed facing up and with all four corners
aligned.
7. Close the lid of the paper tray and push the tray completely into the printer.
8. Depending on the types and sizes of the loaded paper, you need to configure
settings on the control panel. Change the paper type when non-plain paper such as
recycled paper, heavyweight paper or transparencies are loaded. Configure the
paper size when custom size paper is loaded.
CAUTION!
>Do not place paper over the right width guide.
>Do not load paper exceeding the maximum fill line or the
maximum capacity allowed.
>Align the right width guide with the paper width correctly. If the
right width guide is not in place, the paper will not be properly
fed and this may cause paper jams.
>The lid of the tray must be firmly closed. If not, the paper might
become misaligned.
NOTE
You can use Tray1 to manually feed paper. Change the settings in the Printer
Driver to Manual Feed. Feed one sheet a time, and press Enter each time a
sheet is fed to start printing.
Menu settings > 29
M
ENU
SETTINGS
The printer menu allows you to view and change the printer’s internal settings. The settings
are grouped into categories or “menus” such as Information Menu or Print Menu.
Some of these settings are similar to those found in your printer driver or application
software. The settings that you can change using this software act as the printer’s defaults.
These can be overridden by the settings in your printer driver or application. For example,
if you have set the number of copies in the Printer Menu settings to one, this will be
overridden if you select three copies of your document in the printer driver.
Refer to the Reference Guide for details on the Menu settings.
Troubleshooting > 30
T
ROUBLESHOOTING
W
HEN
P
APER
J
AMS
Following the message on the control panel, open the cover (covers are identified as
illustrated) and remove the jammed paper. If paper is torn, check for any remaining torn
pieces of paper.
I
NSIDE
C
OVER
A
When the optional offset catch tray is installed, fold the tray first before opening cover A.
Open Cover A when a message to remove the drum/toner cartridge is displayed.
1. Open cover A (1), and holding the drum/toner cartridge by the grip, remove it from
the printer (1).
2. Turn the roll as shown and remove any jammed paper inside (2).
CAUTION!
When removing jammed paper, make sure that no pieces of torn
paper are left in the machine. If a sheet of paper is wrapped around
the heat roller, or when clearing a jammed paper that is difficult or
impossible to see, do not try to remove it by yourself. Doing so can
cause injuries or burns. Switch off the machine immediately, and
contact your dealer or service.
A
A
A
AA
B
B
B
BB
C
C
C
CC
D
D
D
DD
Specyfikacje produktu
| Marka: | OKI |
| Kategoria: | drukarka |
| Model: | B710 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z OKI B710, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje drukarka OKI
15 Października 2024
13 Października 2024
12 Października 2024
24 Września 2024
23 Września 2024
20 Września 2024
20 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024
Instrukcje drukarka
- drukarka Sony
- drukarka Samsung
- drukarka LG
- drukarka Xiaomi
- drukarka Sharp
- drukarka Huawei
- drukarka Lenovo
- drukarka Epson
- drukarka Fujitsu
- drukarka Roland
- drukarka Panasonic
- drukarka StarTech.com
- drukarka Canon
- drukarka Fujifilm
- drukarka MSI
- drukarka Toshiba
- drukarka D-Link
- drukarka Citizen
- drukarka HP
- drukarka Brother
- drukarka Honeywell
- drukarka Kodak
- drukarka Testo
- drukarka Primera
- drukarka Xerox
- drukarka Godex
- drukarka Olivetti
- drukarka Zebra
- drukarka Dell
- drukarka Digitus
- drukarka AgfaPhoto
- drukarka Kyocera
- drukarka Ricoh
- drukarka Seiko
- drukarka Renkforce
- drukarka Thomson
- drukarka AVM
- drukarka Velleman
- drukarka Dymo
- drukarka Panduit
- drukarka Olympus
- drukarka Mitsubishi
- drukarka Intermec
- drukarka NEC
- drukarka Polaroid
- drukarka Konica Minolta
- drukarka Bixolon
- drukarka Pantum
- drukarka Olympia
- drukarka Datamax O'Neil
- drukarka DNP
- drukarka Equip
- drukarka ZKTeco
- drukarka TSC
- drukarka HiTi
- drukarka Microboards
- drukarka Triumph-Adler
- drukarka Fargo
- drukarka Entrust
- drukarka Kern
- drukarka Brady
- drukarka Tomy
- drukarka Lexmark
- drukarka Sagem
- drukarka Nilox
- drukarka Argox
- drukarka Royal Sovereign
- drukarka Minolta
- drukarka Oce
- drukarka Paxar
- drukarka IDP
- drukarka Metapace
- drukarka Ultimaker
- drukarka Ibm
- drukarka CSL
- drukarka Toshiba TEC
- drukarka Frama
- drukarka Builder
- drukarka Kogan
- drukarka Star Micronics
- drukarka Posiflex
- drukarka Dascom
- drukarka GG Image
- drukarka Vupoint Solutions
- drukarka Elite Screens
- drukarka DTRONIC
- drukarka Phoenix Contact
- drukarka Videology
- drukarka Epson 7620
- drukarka Star
- drukarka EC Line
- drukarka Colop
- drukarka Approx
- drukarka Fichero
- drukarka Raspberry Pi
- drukarka Unitech
- drukarka Middle Atlantic
- drukarka Evolis
- drukarka Tally Dascom
- drukarka Custom
- drukarka Nisca
- drukarka Sawgrass
- drukarka Mutoh
Najnowsze instrukcje dla drukarka
4 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025