Instrukcja obsługi Numark PT01 Touring turntable
Numark
Mengpaneel
PT01 Touring turntable
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Numark PT01 Touring turntable (28 stron) w kategorii Mengpaneel. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/28
User Guide
English ( 2 – 6 )
Guía del usuario
Español ( 7 – 11 )
Guide d'utilisation
Français ( 12 – 16 )
Guida per l'uso
Italiano ( 17 – 21 )
Benutzerhandbuch
Deutsch ( 22 – 26 )
Appendix
English ( 27 )
PT01 Touring
2
TOURING
ON
OFF
78
45
33
STOP
AUTO
ON
OFF
78
45
33
STOP
AUTO
TOURING
User Guide (English)
Introduction
Box Contents
Make sure that the items listed below are included in the box:
• PT01 Touring
• Felt Slipmat
• 45 RPM Adapter
• USB Cable
• Software Download Card
• User Guide
• Safety & Warranty Manual
Safety Information
• Not for use in rain or wet locations. Use only in dry locations.
• Play the turntable only on a level surface.
• The turntable cover must be open when playing records.
• Close the turntable cover when not playing records.
Support
For the latest information about this product (system requirements, compatibility information, etc.) and
product registration, visit numark.com.
Connection Diagram
Items not listed under the Box Contents are sold separately.
Use the included USB cable to connect PT01 Touring to (A) a 5V USB power adapter connected to a power
outlet or (B) your computer.
(A) (B)
Charge or
Power
Computer USB Power
Adapter (not
included)
3
Features
1. Platter – Place your record here.
2. 45 RPM Adapter Holder – Holds the
included 45 RPM adapter. When not
using the adapter, please place it in
this holder.
3. Tonearm – The fixed tonearm can be
raised and lowered by hand, or by
pressing the raise / lower lever.
4. Arm Clip – This specially designed arm
clip secures the tonearm while at rest
or when not in use. The arm clip has
been designed to remain in the up
position while unlocked.
5. Raise / Lower Lever – Raises and
lowers the tonearm.
6. 33 / 45 / 78 Switch – This switch
controls the RPM of the turntable platter.
Note: For best results when playing 78 RPM vinyl
records, use a 78 stylus (sold separately). Only use a
78 stylus with 78 RPM vinyl records.
7. Autostop switch – This switch turns autostop on or
off. When autostop is on, the platter will start spinning
when the tonearm is placed over the record and stop
spinning when the record has reached the end. (When
autostop is off, the platter will always spin regardless of
the position of the tonearm.)
Note: If your vinyl record stops before it reaches the
end of the music, turn Autostop to the off position for
this particular record. This is generally recommended
for 45 RPM records.
8. Volume/Power Knob – To power on PT01 Touring,
turn this knob clockwise until it clicks. When powered on, use
this knob to adjust the volume. To turn off PT01 Touring, turn
this knob counterclockwise until it clicks.
9. Headphone Output – Connect headphones here (sold
separately) to listen to your vinyl.
10. Battery Charging Indicator – The LED will illuminate when
charging the battery. The LED will turn off once the battery is
fully charged.
11. Power Indicator – This LED illuminates when the power is on and goes out when the battery power is
depleted.
12. Speaker – The record's audio will be played through this built-in speaker.
13. Aux Input – Connect a CD player, digital media player, or other audio source to this 1/8” stereo
auxiliary input.
14. RCA Output* – The audio from a playing vinyl record is sent to this line-level coaxial audio output. This
must not be connected to phono level devices.
15. USB Port – Use the included USB cable to connect your turntable to your computer. The USB
connection will send audio from the turntable to your computer. Please see the Using PT01 Touring
With Your Computer section of this manual for information. Also, use the included USB cable to
connect PT01 Touring to a USB power adapter connected to a power outlet or your computer.
IMPORTANT: Remove the plastic cartridge
cover (needle cover) before operating the
turntable.
*WARNING: The RCA outputs are LINE
level. Please only connect these to LINE
level inputs. You may damage your receiver
if you plug in a LINE level device into a
PHONO level input.
IMPORTANT: Place the included felt slipmat
on the platter; then place your record on the
felt slipmat to carefully hold your records.
RL
14
15
AUX
USB
OUT
1
12
12
10
11
9
8
5
6
7
4
3
2
13
TOURING
Specyfikacje produktu
Marka: | Numark |
Kategoria: | Mengpaneel |
Model: | PT01 Touring turntable |
Kolor produktu: | Czarny |
Moc wyjściowa (RMS): | 700, 500 W |
Pobór mocy w trybie czuwania: | 0.5 W |
Kanały wyjścia audio: | 5.1 kan. |
Wejście cyfrowe, optyczne audio: | 2 |
Cyfrowe koncentryczne wyjście audio w: | 2 |
Zakresy tunera: | AM,FM |
Kompatybilność 3D: | Tak |
Ilość portów HDMI: | 5 |
HDMI: | Tak |
System dźwięku: | Dolby Digital Pro LogicII |
Współczynnik zawartości harmonicznych: | 0.06 % |
Stosunek sygnału do szumu: | 98 dB |
Zasięg częstotliwości: | 30 - 40000 Hz |
Radio FM: | Tak |
Moc RMS głośnika niskotonowego: | 100 W |
Moc satelit rms: | 400 W |
Ciężar głośnika niskotonowego: | 6900 g |
Wymiary subwoofera (SxGxW): | 262 x 316 x 264 mm |
Impedancja subwoofera: | 6 Ω |
Typ centralnego głośnika: | 2-drożny |
Moc głośnika centralnego: | 100 W |
Impedancja głośnika centralnego: | 6 Ω |
Wymiary przedniego głośnika (SxGxW): | 90 x 123 x 120 mm |
Waga przedniego głośnika: | 510 g |
Wymiary głośnika centralnego (SxGxW): | 220 x 90 x 109 mm |
Ciężar głośnika centralnego: | 1000 g |
Wymiary odbiornika (S x G x W): | 151 x 315 x 435 mm |
Czułość głośnika satelitarnego: | 81 dB |
Wymiary głośnika surround (szerokość x wysokość x głębokość): | 90 x 123 x 120 mm |
Czułość głośnika centralnego: | 84 dB |
Waga głośnika surround: | 510 g |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Numark PT01 Touring turntable, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Mengpaneel Numark
30 Sierpnia 2024
22 Sierpnia 2024
21 Sierpnia 2024
9 Sierpnia 2024
9 Sierpnia 2024
9 Sierpnia 2024
9 Sierpnia 2024
9 Sierpnia 2024
8 Sierpnia 2024
6 Lipca 2024
Instrukcje Mengpaneel
- Mengpaneel Yamaha
- Mengpaneel Braun
- Mengpaneel Pioneer
- Mengpaneel Philips
- Mengpaneel Technics
- Mengpaneel JBL
- Mengpaneel Severin
- Mengpaneel Behringer
- Mengpaneel Allen & Heath
- Mengpaneel Black & Decker
- Mengpaneel Adler
- Mengpaneel Taurus
- Mengpaneel DAP-Audio
- Mengpaneel Denon
- Mengpaneel Kenwood
- Mengpaneel Bomann
- Mengpaneel Alesis
- Mengpaneel Auna
- Mengpaneel LD Systems
- Mengpaneel Fagor
- Mengpaneel Koenic
- Mengpaneel Korg
- Mengpaneel Wharfedale
- Mengpaneel Pyle
- Mengpaneel KitchenAid
- Mengpaneel Speco Technologies
- Mengpaneel Showtec
- Mengpaneel Samson
- Mengpaneel PreSonus
- Mengpaneel TriStar
- Mengpaneel Bogen
- Mengpaneel Alto
- Mengpaneel Peavey
- Mengpaneel ART
- Mengpaneel RCF
- Mengpaneel Bifinett
- Mengpaneel Soundcraft
- Mengpaneel Clatronic
- Mengpaneel Inventum
- Mengpaneel Ariete
- Mengpaneel DBX
- Mengpaneel Sunbeam
- Mengpaneel Omnitronic
- Mengpaneel Mackie
- Mengpaneel Dynacord
- Mengpaneel Atlas Sound
- Mengpaneel Power Dynamics
- Mengpaneel Alecto
- Mengpaneel Kalorik
- Mengpaneel TOA
- Mengpaneel Monacor
- Mengpaneel HQ Power
- Mengpaneel Tascam
- Mengpaneel Reloop
- Mengpaneel Midas
- Mengpaneel Alpina
- Mengpaneel Allen-Heath
- Mengpaneel American Audio
- Mengpaneel Envivo
- Mengpaneel Pyle Pro
- Mengpaneel IDance
- Mengpaneel QTX
- Mengpaneel Swissonic
- Mengpaneel Team
- Mengpaneel Aviom
- Mengpaneel QSC
- Mengpaneel Roadstar
- Mengpaneel Apart
- Mengpaneel Turmix
- Mengpaneel Skytec
- Mengpaneel Home Electric
- Mengpaneel Monoprice
- Mengpaneel Solid State Logic
- Mengpaneel Adastra
- Mengpaneel Citronic
- Mengpaneel Warm Audio
- Mengpaneel Crown
- Mengpaneel Dateq
- Mengpaneel Santos
- Mengpaneel ANT
- Mengpaneel Rane
Najnowsze instrukcje dla Mengpaneel
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024
18 Września 2024
18 Września 2024
18 Września 2024
17 Września 2024