Instrukcja obsługi Numark PT01 Touring

Numark Sprzęt DJ-ski PT01 Touring

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Numark PT01 Touring (28 stron) w kategorii Sprzęt DJ-ski. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/28
User Guide
English ( 2 – 6 )
Guía del usuario
Español ( 7 – 11 )
Guide d'utilisation
Français ( 12 – 16 )
Guida per l'uso
Italiano ( 17 – 21 )
Benutzerhandbuch
Deutsch ( 22 – 26 )
Appendix
English ( 27 )
PT01 Touring
PT01 Touring
PT01 Touring
PT01 TouringPT01 Touring
2
TOURING
ON
OFF
78
45
33
STOP
AUT O
ON
OFF
78
45
33
STOP
AUT O
TOURING
User Guide (English)
Introduction
Box Contents
Make sure that the items listed below are included in the box:
• PT01 Touring
• Felt Slipmat
• 45 RPM Adapter
• USB Cable
• Software Download Card
• User Guide
• Safety & Warranty Manual
Safety Information
• Not for use in rain or wet locations. Use only in dry locations.
• Play the turntable only on a level surface.
• The turntable cover must be open when playing records.
• Close the turntable cover when not playing records.
Support
For the latest information about this product (system requirements, compatibility information, etc.) and
product registration, visit numark.com.
Connection Diagram
Items not listed under the Box Contents are sold separately.
Use the included USB cable to connect PT01 Touring to (A) a 5V USB power adapter connected to a power
outlet or (B) your computer.
(A) (B)
Charge or
Power
Computer USB Power
Adapter (not
included)
3
Features
1. Platter – Place your record here.
2. 45 RPM Adapter Holder – Holds the
included 45 RPM adapter. When not
using the adapter, please place it in
this holder.
3. Tonearm – The fixed tonearm can be
raised and lowered by hand, or by
pressing the raise / lower lever.
4. Arm Clip – This specially designed arm
clip secures the tonearm while at rest
or when not in use. The arm clip has
been designed to remain in the up
position while unlocked.
5. Raise / Lower Lever – Raises and
lowers the tonearm.
6. 33 / 45 / 78 Switch – This switch
controls the RPM of the turntable platter.
Note: For best results when playing 78 RPM vinyl
records, use a 78 stylus (sold separately). Only use a
78 stylus with 78 RPM vinyl records.
7. Autostop switch – This switch turns autostop on or
off. When autostop is on, the platter will start spinning
when the tonearm is placed over the record and stop
spinning when the record has reached the end. (When
autostop is off, the platter will always spin regardless of
the position of the tonearm.)
Note: If your vinyl record stops before it reaches the
end of the music, turn Autostop to the off position for
this particular record. This is generally recommended
for 45 RPM records.
8. Volume/Power Knob – To power on PT01 Touring,
turn this knob clockwise until it clicks. When powered on, use
this knob to adjust the volume. To turn off PT01 Touring, turn
this knob counterclockwise until it clicks.
9. Headphone Output – Connect headphones here (sold
separately) to listen to your vinyl.
10. Battery Charging Indicator – The LED will illuminate when
charging the battery. The LED will turn off once the battery is
fully charged.
11. Power Indicator – This LED illuminates when the power is on and goes out when the battery power is
depleted.
12. Speaker – The record's audio will be played through this built-in speaker.
13. Aux Input – Connect a CD player, digital media player, or other audio source to this 1/8” stereo
auxiliary input.
14. RCA Output* – The audio from a playing vinyl record is sent to this line-level coaxial audio output. This
must not be connected to phono level devices.
15. USB Port – Use the included USB cable to connect your turntable to your computer. The USB
connection will send audio from the turntable to your computer. Please see the Using PT01 Touring
With Your Computer section of this manual for information. Also, use the included USB cable to
connect PT01 Touring to a USB power adapter connected to a power outlet or your computer.
IMPORTANT: Remove the plastic cartridge
cover (needle cover) before operating the
turntable.
*WARNING: The RCA outputs are LINE
level. Please only connect these to LINE
level inputs. You may damage your receiver
if you plug in a LINE level device into a
PHONO level input.
IMPORTANT: Place the included felt slipmat
on the platter; then place your record on the
felt slipmat to carefully hold your records.
R L
1415
AUX
USB
OUT
1
12
12
10
11
9
8
5
6
7
4
32
13
TOURING

Specyfikacje produktu

Marka: Numark
Kategoria: Sprzęt DJ-ski
Model: PT01 Touring

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Numark PT01 Touring, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Sprzęt DJ-ski Numark

Numark

Numark Scratch Instrukcja

2 Października 2024
Numark

Numark NDX-200 Instrukcja

16 Września 2024
Numark

Numark DJ2GO2 Instrukcja

14 Września 2024
Numark

Numark CS-1RS Instrukcja

5 Lipca 2024
Numark

Numark PT01 Touring Instrukcja

4 Lipca 2024
Numark

Numark Mixtrack 2 Instrukcja

4 Lipca 2024
Numark

Numark iDJ Live 2 Instrukcja

3 Lipca 2024

Instrukcje Sprzęt DJ-ski

Najnowsze instrukcje dla Sprzęt DJ-ski

Festo

Festo CPX-E-CEC-M1 Instrukcja

9 Października 2024
BeamZ

BeamZ StarFuzer Instrukcja

9 Października 2024
Chauvet

Chauvet Freedom Flex Stick X4 Instrukcja

8 Października 2024
Yamaha

Yamaha MW10 Instrukcja

8 Października 2024
Vocopro

Vocopro KRS-3808 PRO Instrukcja

7 Października 2024
Korg

Korg DT-10 Instrukcja

7 Października 2024
Nektar

Nektar CS12 Instrukcja

5 Października 2024
Ortofon

Ortofon OM 5S Instrukcja

5 Października 2024
Vocopro

Vocopro UMH-5805 Instrukcja

5 Października 2024
UDG Gear

UDG Gear Urbanite Instrukcja

5 Października 2024