Instrukcja obsługi Nitecore SRT7GT

Nitecore Flesz SRT7GT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nitecore SRT7GT (1 stron) w kategorii Flesz. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
User Manual
Features
· Designed for use in law enforcement, hunting and tactical applications.
· The worlds first line of flashlights to feature third generation SSR (smart selector ring)
technology
· Smoothly and rapidly select brightness levels and function by rotating a smart selector ring
· Utilizes a CREE XP-L HI V3 LED for a maximum output of up to 1000 lumens
· Second generation ofCrystal Coating Technologyalong withPrecision Digital Optics
Technology’ provide extreme reflector performance
· Boasts a peak beam intensity of 50900cd and a throw distance of up to 450 meters (ANSI
FL1)
· High efficiency circuit board provides up to 240 hours runtime on the lowest output level
· Equipped with unique multi-colored (red, green and blue) tactical / signaling lights
· Versatile 500mW ultraviolet light at 365nm wavelength
· Infinite brightness adjustment from 0 to 1000 lumens
· 7 rapidly switchable functions to select from
· Multi-functional power indicator light displays low battery status
· Patented spring-loaded impact absorption mechanism with reverse polarity protection
· Stainless steel titanium-plated two-way clip
· Stainless steel retaining ring protects core components from damage
· Toughened ultra-clear mineral glass with anti-reflective coating
· Constructed from aero grade aluminum alloy
· Robust HAIII military grade hard-anodized
· Waterproof in accordance with IPX8 (two meters submersible)
· Impact resistant to 1.5 meters
· Tail stand capability
Dimensions
Length: 158mm (6.22”)
Head diameter: 40 mm (1.57”)
Tube diameter: 25.4mm (1”)
Weight: 173g (6.1oz)(without battery)
Battery Options
Adjusting Output
With the light turned on, slowly rotate the Smart Selector Ring (adjacent to the bezel) in a
counter-clockwise direction to cycle through the following brightness levels: Beacon -> Police
warning signal -> Blue mode -> Green mode -> Red mode ->Ultraviolet light-> Standby mode ->
Infinite brightness modes -> Turbo mode -> Strobe mode. These modes may be cycled through
in reverse by rotating the Smart Selector Ring in a clockwise direction.
Power Tips
1. With the light switched on, the power indicator will blink once every two seconds when
power levels reach 50%.
2. With the light switched on, the power indicator will blink rapidly when power levels are low.
Changing Batteries
When the power indicator blinks rapidly it means the batteries need to be replaced.
Alternatively if the light becomes dim or unresponsive to adjustment this also indicates
batteries need to be replaced.
Maintenance
Every 6 months, wipe the threads with a clean cloth followed by a thin coating of
silicon-based lubricant.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service. Should any
problem covered under warranty occurs, customers can contact their dealers or distributors in
regards to their warranty claims, as long as the product was purchased from an authorized
dealer or distributor. NITECORE’s Warranty is provided only for products purchased from an
authorized source. This applies to all NITECORE products.
Any DOA / defective product can be exchanged for a replacement through a local
distributor/dealer within the 15 days of purchase. After 15 days, all defective / malfunctioning
NITECOR products can be repaired free of charge for a period of 60 months (5 years)
from the date of purchase. Beyond 60 months (5 years), a limited warranty applies, covering
the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified if the product(s) is/are broken down, reconstructed and/or modified
by unauthorized parties, or damaged by batteries leakage. For the latest information on
NITECOR products and services, please contact a local NITECOR distributor or send
an email to service@nitecore.com.
All images, text and statements specified herein this user manual are for reference purpose
only. Should any discrepancy occurs between this manual and information specified on
www.nitecore.com. Sysmax Industry Co., Ltd. reserves the rights to interpret and amend the
content of this document at any time without prior notice.
Thanks for purchasing NITECORE!
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
®
ALL-ROUND Flashlight Expert
NOTICE
The above data has been measured in accordance with the international flashlight testing standards
ANSI/NEMA FL1 using one x 3.7V 3400mAh 18650 battery and 2 x 3V 1700mAh CR123 batteries under
laboratory conditions. The data may vary slightly during real-world use due to battery type, individual
usage habits and environmental factors.
*
Infinite brightness adjustment varies from 0.1 to 1000 lumens and is manually adjusted by rotation
of the Smart Selector Ring. Subsequently, runtimes will vary anywhere from 75 minutes to 240 hours
depending on chosen level of output.
Battery Installation
Insert one 18650 battery or two CR123 batteries
with the positive pole pointing forward (toward
the light head).
NOTE:
1. Ensure batteries are inserted with the positive (+)
end pointing to the head. The SRT7 will not operate
with incorrectly inserted batteries.
2. Ensure when turning the SRT7 on, the beam is
directed away from the eyes of people or animals.
On/Off
To switch ON: Press the button on the tailcap until aclick” is heard.
To switch OFF: Press the button on the tailcap a second time until aclick” is heard.
Note:
When in standby mode, the SRT7GT
will draw a small amount of current
from the battery to maintain the
operation of its micro-processor. The
blue power indicator located on the
head portion will blink once every
2 seconds to serve as a positioning
light when the torch is standing by.
TYPE
Nominal voltage
Compatible
Primary Lithium battery CR123 3V Y (Recommended)
18650 Rechargeable Li-ion battery 18650 3.7V Y (Recommended)
Rechargeable Li-ion battery RCR123 3.7V Y
Please find us on facebook: Nitecore Flashlight
20170309
Accessories
holster,clip,lanyard,spare O ring,-
spare tactical ring,spare tail cover
130h
50900cd
(Peak Beam Intensity)
450m
(Beam Distance)
IPX8, 2m
(Waterproof AND Submersible)
1.5m
(Impact Resistant)
TURBO GREEN
MID
ULTRALOW
RED BLUE UV
18h18h
240h26h26h1 28h15min h 26h
18h19h
1h
LUMENS
1000
LUMENS
0.1
LUMENS
13
LUMEN
19
LUMENS
3
Output & Runtime
Momentary Illumination
Momentary illumination can be achieved by switching the flashlight off and then half pressing
and holding the tail switch. Release switch to turn the light off.
ATR
The SRT7GT come with a Advanced Temperature Regulation module, allowing the SRT7GT
to regulate its output and adapt to the ambient environment, therefore maintaining optimal
performance.


Specyfikacje produktu

Marka: Nitecore
Kategoria: Flesz
Model: SRT7GT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nitecore SRT7GT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Flesz Nitecore

Nitecore

Nitecore MH40 Pro Instrukcja

8 Października 2024
Nitecore

Nitecore HU2000 Instrukcja

8 Października 2024
Nitecore

Nitecore TM9K Pro Instrukcja

5 Października 2024
Nitecore

Nitecore EDC25 Instrukcja

5 Października 2024
Nitecore

Nitecore NU45 Instrukcja

4 Października 2024
Nitecore

Nitecore UT27 Pro Instrukcja

2 Października 2024
Nitecore

Nitecore HA13 Instrukcja

26 Września 2024
Nitecore

Nitecore MH12 Pro Instrukcja

26 Września 2024
Nitecore

Nitecore MH40S Instrukcja

21 Września 2024
Nitecore

Nitecore EC4SW Instrukcja

20 Września 2024

Instrukcje Flesz

Najnowsze instrukcje dla Flesz

Ledlenser

Ledlenser P9R Core LEP Instrukcja

15 Października 2024
LED Lenser

LED Lenser P5R Instrukcja

11 Października 2024
Brennenstuhl

Brennenstuhl TL 1201 AF Instrukcja

9 Października 2024
Brennenstuhl

Brennenstuhl TL 601 AF Instrukcja

9 Października 2024
Klein Tools

Klein Tools KHH56308 Instrukcja

9 Października 2024
Brennenstuhl

Brennenstuhl HL 400 AC Instrukcja

9 Października 2024
AccuLux

AccuLux UniLux PRO Instrukcja

8 Października 2024
AccuLux

AccuLux SL6 LED Instrukcja

8 Października 2024
Emos

Emos P4544 Instrukcja

8 Października 2024
Brennenstuhl

Brennenstuhl HL 200 A Instrukcja

8 Października 2024