Instrukcja obsługi Nitecore SENS Mini

Nitecore Flesz SENS Mini

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nitecore SENS Mini (1 stron) w kategorii Flesz. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
®
User Manual
Features
CREE XP-G (R5) LED
Maximum output of up to 170 lumens
Highly effective current circuit board
High efficiency circuit enables maximum runtime of up to 14 hours
3 presetted brightness levels
Active dimming system with auto-adjust function
Soft turn-on mode and low illumination for everyday usage
Convenient one-handed operation
Board voltage circuit, compatible with primary or rechargeable Li-on
batteries
Reverse polarity protection
Equipped with integrated lens
Constructed from aerospace grade aluminum alloy
Type III military grade hard anodizing
Special-made rhombic knurling for better grip
Waterproof in accordance with IPX-8 (2 meters submersible)
Tail stand ability
Dimensions
Length: 57mm (2.24”)
Head Diameter: 19.8mm (0.78”)
Tail Diameter: 18.5mm (0.73”)
Weight: 19.4g (0.68oz)(without battery)
Brightness Control
When the flashlight is turned on from off:
• Flashlight will enter high output level when the head is parallel to the floor
• Flashlight will enter medium output level when the head is at 45 degrees
• Flashlight will enter low output level when the head is pointing straight down
Thanks for purchasing NITECORE!
NOTICE
The stated data has been
measured in accordance with
the international flashlight
testing standards ANSI/NEMA
FL1, using one high quality
CR2 battery (3V, 850mAh)
under laboratory conditions.
The data may vary in
real-world use due to different
battery usage or environmental
conditions.
SYSMAX Industry Co.,Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.NITECORE.com
Address Rm1407-08, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
Brightness & Runtime
14
h
4
h
1
h
HIGH MID LOW
LUMENS
50
LUMENS
170
LUMENS
20
1200cd
(Peak Beam Intensity)
69m
(Beam Distance)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m
(Impact Resistant)
ALL-ROUND Flashlight Expert
Accessories
Key chain, spare O-ring
Battery Options
Please follow our facebook for more info: NITECORE Flashlights
SIZE
Nominal voltage
Usability
Primary Lithium battery CR2 3V Y (Recommended)
Operation instructions
Battery installation
Insert one CR2 battery
WARNING
Always ensure batteries are inserted with the positive (+) ends pointing toward
the flashlight head. If incorrectly installed, the flashlight will not work.
ON/OFF
Turn ON: Rotate the head of the flashlight in a clockwise direction to turn it on.
Turn OFF: Rotate the head of the flashlight in a counter-clockwise direction to
turn it off.
HIGH
MEDIUM
LOW
Notes:
1. Each time you turn on the flashlight, the SENS Mini built-in acceleration
sensor can detect the angle and switch to the appropriate brightness level
2. After the lights is powered on, the sensor will shut off to avoid brightness
changing when the user changes the flashlight angle.
Active Dimming Technology
With the flashlight switched off, turn on the light with the head pointed straight
up. The light will access the active dimming function immediately. An
acceleration sensor is built in the SENS Mini flashlight, which can continuously
detect the angle of the light and work with the lights mico-computer to select
the appropriate output. For example, when it detects a horizontal position, the
built-in micro-computer will assume a higher output is appropriate and increase
output to illuminate a longer distance. When it detects a vertical position,
micro-computer will decrease output so to save battery life, extending runtime
of SENS up to 5-8 times.
Notes:
1. When the flashlight switches from low to high level, the output will increase
momentarily, allowing the user to observe distant targets.
2. After the flashlight switches from low to high level, the brightness will
decrease slowly to allow the user’s eyes to adapt.
Maintenance
Clean the threads twice a year with a clean cloth and coat with silicone grease.
Warranty Service
All NITECORE® products are warranted for quality. DOA / defective products
can be exchanged for replacement though a local distributor/dealer within the
14 days of purchase. After 14 days, all defective / malfunctioning NITECORE®
products will be repaired free of charge for a period of 18 months from the date
of purchase. After 18 months, a limited warranty applies, covering the cost of
labor and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please
contact your national NITECORE® distributor or visit our official website:
www.NITECORE.com


Specyfikacje produktu

Marka: Nitecore
Kategoria: Flesz
Model: SENS Mini

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nitecore SENS Mini, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Flesz Nitecore

Nitecore

Nitecore MH40 Pro Instrukcja

8 Października 2024
Nitecore

Nitecore HU2000 Instrukcja

8 Października 2024
Nitecore

Nitecore TM9K Pro Instrukcja

5 Października 2024
Nitecore

Nitecore EDC25 Instrukcja

5 Października 2024
Nitecore

Nitecore NU45 Instrukcja

4 Października 2024
Nitecore

Nitecore UT27 Pro Instrukcja

2 Października 2024
Nitecore

Nitecore HA13 Instrukcja

26 Września 2024
Nitecore

Nitecore MH12 Pro Instrukcja

26 Września 2024
Nitecore

Nitecore MH40S Instrukcja

21 Września 2024
Nitecore

Nitecore EC4SW Instrukcja

20 Września 2024

Instrukcje Flesz

Najnowsze instrukcje dla Flesz

Ledlenser

Ledlenser P9R Core LEP Instrukcja

15 Października 2024
LED Lenser

LED Lenser P5R Instrukcja

11 Października 2024
Brennenstuhl

Brennenstuhl TL 1201 AF Instrukcja

9 Października 2024
Brennenstuhl

Brennenstuhl TL 601 AF Instrukcja

9 Października 2024
Klein Tools

Klein Tools KHH56308 Instrukcja

9 Października 2024
Brennenstuhl

Brennenstuhl HL 400 AC Instrukcja

9 Października 2024
AccuLux

AccuLux UniLux PRO Instrukcja

8 Października 2024
AccuLux

AccuLux SL6 LED Instrukcja

8 Października 2024
Emos

Emos P4544 Instrukcja

8 Października 2024
Brennenstuhl

Brennenstuhl HL 200 A Instrukcja

8 Października 2024