Instrukcja obsługi Nitecore MH2A
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nitecore MH2A (1 stron) w kategorii Flesz. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
®
User Manual
Features
• Premium CREE XM-L U2 LED
• Maximum output of 600 lumens
• High efficiency regulation circuit
• Maximum runtime of up to 26 hours
• Intelligent charging circuit with voltage detection charges safely and rapidly
• Integrated micro USB charging port is water, dust and impact resistant.
• Multiple output modes are conveniently accessed via rapid rotary switch
• User-defined mode provides customized brightness levels plus strobe and SOS
modes.
• Intelligent memory function stores preferred brightness setting
• Broad voltage circuit accepts both Nitecore dedicated battery and two AA batteries
• Optimized ultra-precise reflector offers a longer beam distance than competing
products
• Waterproof in accordance with IPX-8 (submersible to two meters)
• Toughened ultra-clear mineral glass with anti-reflective coating
• Constructed from aerospace-grade aluminum alloy
• HAIII military grade hard-anodized
• Reverse polarity protection
• Detachable two-way anti-rolling clip
• Anti-rolling design
Dimensions
Length: 176mm (6.93”)
Head Diameter: 25.4mm (1”)
Tail Diameter: 21.5mm (0.85”)
Weight: 86grams (3oz)(without battery)
Thanks for purchasing NITECORE!
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000 FAX: +86-20-83882723
E-mail: info@nitecore.com Web: www.nitecore.com
Address： Rm1407-08, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
Battery Options
ALL-ROUND Flashlight Expert
Operation instructions
Battery installation (see adjacent diagram)
1. Unscrew the tail cap in a counter-clockwise
direction.
2. Insert one dedicated battery with the
positive pole pointing forward (toward the
light head).
NOTE:
Ensure batteries are inserted with the
positive (+) end pointing to the head. The
MH2A will not operate with incorrectly
inserted batteries.
Charging indicator light
1. Connect the charging cable to the flashlight and the A/C power adapter to the wall
outlet as shown in the adjacent image. Fully charging a depleted dedicated battery
takes approximately 4 hours.
2. Under normal charging conditions, the red indicator light near the charging port will
blink twice every second.
3. If a problem is detected during the charging process, the MH2A will stop charging
and the red indicator will blink rapidly. This is usually caused by faulty or
incorrectly inserted batteries.
4. When charging is complete, the red indicator will illuminate steadily.
Accessories
Nitecore MH2A dedicated battery(NL1427),
lanyard, USB cable, clip, holster,
spare switch cap and spare O-ring
*Warning: Charge MH2A dedicated battery only, do not attempt to charge
non-rechargeable batteries, AA batteries.
Brightness & Runtime
NOTICE
Stated data has been
measured according to
the international
flashlight testing
standards ANSI/NEMA
FL1 using one NITECORE
NL1427 battery (3.7V,
1500mAh) under
laboratory conditions.
The data may vary due
to individual usage
habits and environmental
conditions.
NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop
the ANSI FL1 standard of measurement. Product testing data is in accordance with
these internationally recognized scientific standards.
Caution:
The MH2A needs to be turned on in
order to enter charging mode.
Switching ON/OFF
To switch ON: Press the button on the tailcap until a “click” is heard.
To switch OFF: Press the button on the tailcap a second time until a “click” is heard.
Mode Switching
The Nitecore MH2A has two modes: Turbo and user-defined. These two modes can
be changed by simply tightening and loosening the flashlight head. Turbo provides
100% output while user-defined contains five selectable sub-modes.
Turbo Mode
Turbo mode provides an output of 600 lumens and is accessed when the flashlight is
switched ON with the head lightly tightened. While in this mode, momentary
illumination can be achieved by switching off the flashlight and then half pressing and
holding the switch.
Note: After three minutes of use in turbo mode, the flashlight will lower its
output automatically to preventing overheating and increase runtime.
User-Defined Mode
User-defined mode is accessed by slightly loosening the flashlight head. In this mode,
lightly and rapidly pressing the switch will cycle through brightness and other
functions in the following order: “High-Mid-Low-SOS-Strobe”. Pressing the switch all
the way down will save and memorize a desired setting.
Tips: Make NITECORE MH2A your perfect Multitask Hybrid flashlight.
NITECORE MH2A flashlights essentially have two modes: Turbo mode (100% output)
and custom mode. Turbo mode is accessed by tightening the flashlight head while
any of the five customizable modes (strobe, SOS, low, medium and high) are selected
by loosening the head and rapidly pressing the on/off switch to cycle through the
modes. A given mode can be saved by simply turn off the light while in that mode.
Real-world examples include: When used as a flashlight around the home, the head
can be loosened and low level selected in custom mode, providing long runtimes at a
lower light intensity. The same flashlight could then be taken out and used a
law-enforcement duty light, with user-defined mode set in strobe, making it easy to
alternate between turbo mode and strobe with a simple twist of the flashlight head.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating
of silicon-based lubricant.
Warranty Service
All NITECORE
® products are warranted for quality. DOA / defective products can be
exchanged for replacement though a local distributor/dealer within the 14 days of
purchase. After 14 days, all defective / malfunctioning NITECORE
® products will be
repaired free of charge for a period of 18 months from the date of purchase. After 18
months, a limited warranty applies, covering the cost of labor and maintenance, but
not the cost of accessories or replacement parts. The warranty is nullified in all of the
following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized
parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE
® products and services, please contact your
national NITECORE
® distributor or send an email to service@nitecore.com
Charging Function
The MH2A is capable of charging a dedicated battery via the included USB cable.
Simply install the Nitecore MH2A dedicated battery, plugging one end of the USB
cable into the flashlight and the other end into a universal USB port / adaptor and the
MH2A will take care of the rest.
Please follow our facebook for
more info: NITECORE Flashlights
Primary AA battery *
Dedicated battery
AA 1.5V
Rechargeable AA battery * AA 1.2V
Primary AA Lithium battery * L91 1.5V
Primary LiFePO4 battery 14500 3.2V
Rechargeable Li-ion battery 14500 3.7V
3.7V
SIZE Nominal voltage Compatible
Yes (Compatible but can
NOT be recharged)
Yes (Compatible but can
NOT be recharged)
Yes (Compatible but can
NOT be recharged)
N (Banned)
N (Banned)
Yes (Compatible and
can be recharged)
TURBO HIGH MID LOW
LUMENS
233
LUMENS
600
LUMENS
80
LUMENS
22
7
h
30
min
1
h
15
min
2
h
30
min
26
h
135m (Beam Distance)
4500cd (Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m (Impact Resistant)
NL1427
Specyfikacje produktu
| Marka: | Nitecore |
| Kategoria: | Flesz |
| Model: | MH2A |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Nitecore MH2A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Flesz Nitecore
8 Października 2024
8 Października 2024
5 Października 2024
5 Października 2024
4 Października 2024
2 Października 2024
26 Września 2024
26 Września 2024
21 Września 2024
20 Września 2024
Instrukcje Flesz
- Flesz Beko
- Flesz Gorenje
- Flesz Milwaukee
- Flesz Philips
- Flesz SilverCrest
- Flesz Toolcraft
- Flesz Nedis
- Flesz Black & Decker
- Flesz Fenix
- Flesz Garmin
- Flesz DeWalt
- Flesz Einhell
- Flesz Silverline
- Flesz Makita
- Flesz ArmyTek
- Flesz Petzl
- Flesz Knog
- Flesz Cateye
- Flesz Ledlenser
- Flesz Emos
- Flesz NightStick
- Flesz Ansmann
- Flesz Little Tikes
- Flesz Velleman
- Flesz VDO
- Flesz IVT
- Flesz Rocktrail
- Flesz Maglite
- Flesz Aluratek
- Flesz Abus
- Flesz Olympia
- Flesz Hama
- Flesz Alpen Optics
- Flesz Princeton Tec
- Flesz Duronic
- Flesz Goobay
- Flesz Trelock
- Flesz Craftsman
- Flesz Olight
- Flesz Klein Tools
- Flesz Black Diamond
- Flesz PowerPlus
- Flesz Powerfix
- Flesz HiKOKI
- Flesz Dörr
- Flesz SureFire
- Flesz AccuLux
- Flesz Varta
- Flesz Spanninga
- Flesz Brennenstuhl
- Flesz Streamlight
- Flesz Nordride
- Flesz Silva
- Flesz Trebs
- Flesz Maktec
- Flesz Steren
- Flesz Livarno
- Flesz Kayoba
- Flesz Barska
- Flesz LED Lenser
- Flesz Parat
- Flesz Coleman
- Flesz Energizer
- Flesz Silva Schneider
- Flesz Tecxus
- Flesz Goal Zero
- Flesz Beghelli
- Flesz 4K5
- Flesz GP
- Flesz CEL-TEC
- Flesz Nebo
- Flesz Underwater Kinetics
- Flesz MOON
- Flesz KSE-Lights
- Flesz SuperNova
- Flesz Coast
Najnowsze instrukcje dla Flesz
15 Października 2024
11 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024