Instrukcja obsługi Nitecore MH10
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nitecore MH10 (1 stron) w kategorii Flesz. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
User Manual
®
The All-Round Flashlight Expert
MH10
Features
·Utilizes a CREE XM-L2 U2 LED
·Maximum output of up to 1000 lumens
·Integrated “Precision Digital Optics Technology” provides extreme reflector
performance
·Boasts a peak beam intensity of 13,500 cd and a throw distance of up to 232
meters
·Innovative single button offers access to four brightness levels and three special
modes
·High efficiency constant current circuit provides max runtime of 520 hours
·Integrated power indicator light displays remaining battery power (Chinese Patent:
ZL201220057767.4 )
·Power indicator’s secondary function displays battery voltage (accurate to 0.1V)
·Charging module with a micro USB port charges Li-ion batteries rapidly
·Direct access to ultra-low output
·Reverse polarity protection prevents damage from incorrectly inserted batteries
·Constructed from aero grade aluminum alloy with HAIII military grade
hard-anodized finish
·Waterproof in accordance to IPX-8 (two meters submersible)
·Impact resistant to 1.5 meters
·Tail stand capability
Dimensions
Length: 130mm (5.12”)
Head diameter: 25.4mm (1”)
Tube diameter: 25.4mm (1”)
Weight: 75g (2.65oz)(without battery)
Direct access to ultra-low
With the MH10 switched off, press and hold the switch for more than 1 second to
enter ultra-low output (1 lumen);
Note: When in high output, the MH10 will reduce output luminance automatically after
5 minutes of use to prevent overheating and extend battery longevity.
Special Modes (Strobe/SOS/Location Beacon)
Press the switch twice in quick succession in any state to enter strobe mode. When in
strobe mode, press and hold the switch for more than 1 second to cycle through SOS,
location beacon and strobe modes. To exit, simply press the switch again. The MH10
does not have memory effect in any of these special modes.
Charging Function
The MH10 is capable of charging one 18650 Li-ion battery with the included USB
charging cable. Connect the USB cable to the MH10's charging port and a power
source (USB chargers, PC or other power terminals) as shown in the adjacent image.
Fully charging one depleted 18650 battery takes approximately 6 hours.
Thanks for purchasing NITECORE!
Output & Runtime
NOTICE
The stated data has been
measured in accordance with
the international flashlight
testing standards ANSI/NEMA
FL1, using 1xNitecore 18650
battery (3.7V, 2600mAh) or
2xNitecore CR123 batteries
(3V, 1700mAh) under
laboratory conditions. The data
may vary in real-world use due
to different battery use or
environmental conditions.
TYPE
Nominal voltage
Compatible
Primary Lithium battery CR123 3V Y (Recommended)
18650 Rechargeable Li-ion battery 18650 3.7V Y (Recommended)
Rechargeable Li-ion battery RCR123 3.7V N
Operating Instructions
Battery Installation
Insert 1x18650 battery or 2xCR123
batteries as illustrated.
Note: After loading batteries, the blue
power indicator will blink to indicate battery
voltage.Please refer to “Power Tips”
section of this manual for details.
WARNING
1. Ensure batteries are inserted with the
positive (+) ends pointing to the head. The
MH10 will not be operational with
incorrectly inserted batteries.
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
20150916
Changing /Charging Battery
Batteries should be recharged or replaced when any of the followings occurs: The
power indicator blinks rapidly, output appears to be dim or the flashlight becomes
unresponsive.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating
of silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. Any defective / malfunctioning
NITECORE® product can be repaired free of charge for a period of 60 months (5 years) from
the date of purchase. Beyond 60 months (5 years), a limited warranty applies, covering the
cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please contact a local
NITECORE® distributor or send an email to service@nitecore.com
※All images, text and statements specified herein this user manual are for reference purpose
only. Should any discrepancy occurs between this manual and information specified on
www.nitecore.com, information on our official website shall prevail. Sysmax Industry Co., Ltd.
reserves the rights to interpret and amend the content of this document at any time without
prior notice.
4.2V3.5V 3.7V 3.9V
Full powerLow power
6.4V4.8V 5.6V 6.0V
Full powerLow power
1 x 18650 battery
2 x CR123 batteries
HIGH MID LOW
LUMENS
240
LUMENS
1000
LUMENS
70
LUMEN
1
1
h
15
min
28
h
6
h
LOWER
520
h
5
h
15
min
300
h
20
h
1
h
232m (Beam Distance)
13500cd (Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m
(Impact Resistant)
1×18650 2×CR123
Accessories
Nitecore NL183 battery, USB charging cable,
holster, clip, lanyard, spare USB port cover,
spare O-ring
Battery Options
2. When the MH10 is kept in a backpack or left unused for extended periods of time,
Nitecore recommends all batteries are removed to prevent accidental activation of the
flashlight or battery leakage.
ON/OFF
To switch ON: Press the switch until a click is heard.
To switch OFF: Press the switch once again until a click is heard.
Brightness Levels
With the MH10 switched on, press and hold the switch for more than 0.5 second to
cycle through brightness levels of ultra-low, low, medium and high. To select a desired
brightness level, simply release the switch when that level is being displayed. This
mode has memory effect to ensure direct access to the previously used brightness
level when the MH10 is resumed.
Under normal charging conditions, the blue power indicator light will illuminate
steadily to notify users. When charging is complete, the MH10 will terminate the
charging process automatically and the blue power indicator goes out.
Power Tips
1. When the light is on, the power indicator will blink once every two seconds when
power level drops to 50%; the power indicator will blink quickly when power level is
low.
2. After battery installation, the blue power indicator will blink to indicate battery
voltage (accurate to 0.1V). For example, when battery voltage is at 4.2V, the blue
power indicator will blink 4 times, followed by a one second pause and another 2
blinks. Different voltages represent the corresponding remaining battery power levels:
Please find us on facebook:
NITECORE Flashlights
Specyfikacje produktu
| Marka: | Nitecore |
| Kategoria: | Flesz |
| Model: | MH10 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Nitecore MH10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Flesz Nitecore
8 Października 2024
8 Października 2024
5 Października 2024
5 Października 2024
4 Października 2024
2 Października 2024
26 Września 2024
26 Września 2024
21 Września 2024
20 Września 2024
Instrukcje Flesz
- Flesz Beko
- Flesz Gorenje
- Flesz Milwaukee
- Flesz Philips
- Flesz SilverCrest
- Flesz Toolcraft
- Flesz Nedis
- Flesz Black & Decker
- Flesz Fenix
- Flesz Garmin
- Flesz DeWalt
- Flesz Einhell
- Flesz Silverline
- Flesz Makita
- Flesz ArmyTek
- Flesz Petzl
- Flesz Knog
- Flesz Cateye
- Flesz Ledlenser
- Flesz Emos
- Flesz NightStick
- Flesz Ansmann
- Flesz Little Tikes
- Flesz Velleman
- Flesz VDO
- Flesz IVT
- Flesz Rocktrail
- Flesz Maglite
- Flesz Aluratek
- Flesz Abus
- Flesz Olympia
- Flesz Hama
- Flesz Alpen Optics
- Flesz Princeton Tec
- Flesz Duronic
- Flesz Goobay
- Flesz Trelock
- Flesz Craftsman
- Flesz Olight
- Flesz Klein Tools
- Flesz Black Diamond
- Flesz PowerPlus
- Flesz Powerfix
- Flesz HiKOKI
- Flesz Dörr
- Flesz SureFire
- Flesz AccuLux
- Flesz Varta
- Flesz Spanninga
- Flesz Brennenstuhl
- Flesz Streamlight
- Flesz Nordride
- Flesz Silva
- Flesz Trebs
- Flesz Maktec
- Flesz Steren
- Flesz Livarno
- Flesz Kayoba
- Flesz Barska
- Flesz LED Lenser
- Flesz HQ
- Flesz Parat
- Flesz Coleman
- Flesz Energizer
- Flesz Silva Schneider
- Flesz Tecxus
- Flesz Goal Zero
- Flesz Beghelli
- Flesz 4K5
- Flesz GP
- Flesz CEL-TEC
- Flesz Nebo
- Flesz Underwater Kinetics
- Flesz MOON
- Flesz KSE-Lights
- Flesz SuperNova
- Flesz Coast
Najnowsze instrukcje dla Flesz
15 Października 2024
11 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024