Instrukcja obsługi Nissin Di700A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nissin Di700A (25 stron) w kategorii lampa błyskowa. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/25
for Canon/ Nikon digital SLR cameras
INSTRUCTION MANUAL
Thank you for purchasing a Nissin product
Before using this flash unit, please read this instruction manual and
refer your camera owner’s manual carefully to get a better
understanding of the proper operation to enjoy flash photography.
Nissin Di700A type Canon and Nikon is designed for Canon and Nikon digital
SLRs, with the latest TTL flash control system. Please note that Di700A Canon
and Nikon are not usable with other branded cameras for TTL operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Please refer Nissin’s compatibility chart shown at its home page for details and
recent updates: http://www.nissin-japan.com or http://www.nissindigital.com
SPECIAL FEATURES
The Di700A features the use of a selector dial to quickly move through all settings
and can be easily operated by one finger-tip.
The Di700A with wireless flash shooting using Nissin Air System/ radio
transmission.
Flash protection function:
When the red LED lamp starts blinking, it means that flash is overheating.
The LED turns red when charging.
When the LED lamp turns green, the flash is charged and you can start to shoot.
Compatible cameras
1
Remark: Nissin Air System (NAS) is designed for Nissin flash and
Nissin commander.
These safety instructions refer to important information on how to use this
product safely and properly. Please read the following instructions before
using the product.
SAFETY INSTRUCTIONS
WARNING
The flash unit contains high voltage electric parts. Do not try to open or repair the flash
unit. Return it back to the repair service station or the store where you bought it from.
Do not touch the inside parts from the opening when the unit was dropped or broken.
Do not shoot the flash directly to the eyes at short distance. It may damage the eyes.
When taking a flash picture, especially toward a baby, it is recommended to keep the
flash unit at least 1 meter (3.3feet) away from the subject. Or use diffuser or bounce the
light to the ceiling or wall to soften its intensity.
Do not place the flash unit near any flammable gas, chemicals or such liquids. It may
cause fire or electric shock.
Do not touch the flash unit with wet hands or use in the water. The flash unit carries high
voltage inside and it may cause an electric shock.
Do not shoot the flash unit directly at the driver of automobiles or such vehicles.
Do not set the flash window close to the human body and shoot, which may get scalded.
Place the batteries correctly in position. Placing the batteries in wrong polarity may
cause leakage, exothermic heat or explosion.
CAUTIONS
Do not leave or store the flash unit in the temperature over 40ºC/ 104ºF, such as in the
automobile.
The flash unit is not water resistance. Keep the unit away from rain, snow and humidity.
Do not use benzene, thinner or other alcoholic agents to clean the unit.
Do not use this flash unit with cameras which are not recommended in the compatibility
list at official website, otherwise it may damage the camera’s circuitry.
Remove the batteries when not in use for a longer period of time.
Do not have a heavy impact to the flash unit, nor throw it onto a hard surface floor.
When using the external power pack, read the safety instructions carefully and follow the
operation manual.
This symbol refers to the possibility of personal injury, death or property
damage if not followed as described.
This sign refers to conditions which may cause damage or defect.
2

Specyfikacje produktu

Marka: Nissin
Kategoria: lampa błyskowa
Model: Di700A
Kolor produktu: Czarny
Wysokość produktu: 140 mm
Szerokość produktu: 75 mm
Głębokość produktu: 115 mm
Waga produktu: 380 g
Liczba kanałów: 8 kan.
Rodzaj baterii: AA
Model: Slave flash
Liczba baterii: 4
Szacunkowy czas recyklingu: 4 s
Szacunkowa liczba fleszy: 200 - 1500
Liczba szacunkowa (iso 100, ustawiona na 35 mm zoom): 28 m
Długość ogniskowa: 24 - 200 mm
Walizka: Tak
Pomocniczy promień przy Auto Focus (AF): Tak
Tryby lampy błyskowej: High-speed synchronization, Red-eye reduction, Second curtain synchro, Slow synchronization
Połączenia bezprzewodowe: Tak
Pomoc przy ustawianiu lampy błyskowej: 54 m
Temperatura koloru: 5600 K
Kompatybilność marek aparatu: Canon, Nikon, Sony
Systemy lampy błyskowej zależne od marki: i-TTL (Nikon)
Zasięg: 0.7 - 6 m

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nissin Di700A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje lampa błyskowa Nissin

Instrukcje lampa błyskowa

Najnowsze instrukcje dla lampa błyskowa