Instrukcja obsługi Nilfisk D 140.4

Nilfisk Myjka wysokociśnieniowa D 140.4

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nilfisk D 140.4 (15 stron) w kategorii Myjka wysokociśnieniowa. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/15

D 140.4, D-PG 140.4

E 145.4 , E 150.2, E 160.1

Instructions for use

03.2018

Original instructions

The instruction consists of 3 parts. Part 1:3 Safety

Instructions. Part 2:3 User Guide. Part 3:3 Technical

Data and Declaration.

Part 1:3 - Safety Instructions

Before rst use of the machine, read the instruc-

tions carefully. Save instructions for later use.

Safety instructions marked with this symbol

must be observed to prevent personal injury

or serious damage to property.

WARNING

This machine has been designed for use with

cleaning agents supplied or recommended by Nilsk.

The use of other cleaning agents or chemicals may

adversely aect the safety of the machine.

High pressure jets can be dangerous if

subject to misuse. The jet must not be direct-

ed at persons, live electrical equipment or

the machine itself.

Do not use the machine within range of persons

unless they wear protective clothes.

Do not direct the jet against yourself or others in

order to clean footwear.

Risk of explosion – Do not spray ammable liq-

uids. High pressure washers shall not be used

by children or untrained personnel.

High pressure hoses, ttings and couplings are

important for the safety of the machine. Use only

hoses, ttings and couplings recommended by Nil-

sk.

To ensure machine safety, use only original spare

parts recommended by Nilsk.

Water that has own through back-ow preven-

ters is considered to be non-potable.

Don’t use the machine if a supply cord or impor-

tant parts of the machine are damaged, e.g. safety

devices, high pressure hoses, trigger gun.

Inadequate extension cords can be dange rous.

If an extension cord is used, it shall be suitable for

outdoor use, and the connection has to be kept dry

and o the ground. It is recommended that this is

accomplished by a cord reel which keeps the sock-

et at least 60 mm above the ground.

Switch o and unplug the machine when leaving

it unattended, when nished using it or when con-

verting it to another function, when doing repair and

maintenance.

During use of high pressure washers, aerosols

may be formed. Inhalation of aerosols can be haz-

ardous to health, for the protection against aerosols

a respiratory mask of class FFP 2 or equivalent may

be needed, depending on the cleaning environment.

Intended Use and Terms of Liability

• The C-, D-, E- and P-series have been developed

for domestic cleaning pur poses only and for use

in an upright position. Any other use is considered

as improper use.

•

A high pressure washer operates with dierent

levels of pressure and cleaning detergents for

various cleaning tasks and results. Always follow

instructions on detergents for use, emergency

and disposal.

• Do not operate the machine at temperatures be-

low 0°C. Never start a frozen machine, never use

it indoor and never cover it during use. This is

considered improper and wrongful use. Use of

wrongful pressure, detergent and/or applications

may cause damage to machine, surfaces, material

and devices.

All of the above is considered improper and wrong-

ful use. Nilsk accepts no liability for any damage

resulting from any improper or wrongful use.

Please refer to our website at www.get-started.nilsk.

com for further instructions and information on use,

emergency and disposal.

Safety devices and their functioning

The machine automa tically stops when releasing

the trigger. The machine will start again when re-

activating the trigger. The spray handle features a

locking device. When activated, the spray handle

cannot be operated.

The machine has an automatic self-resetting thermal

protector. If the machine is overheated, the thermal

protector will cut the power supply. In this case, wait

for the machine to cool down. An integrated hydrau-

lic safety valve protects the system from excessive

pressure.

Precautions

The electric supply connection shall be made by a

qualied electrician and comply with IEC 60364-1.

It is recommended that the electric supply to this

machine should include either a residual current

device that will interrupt the supply if the leakage

current to earth exceeds 30 mA for 30 ms or a device

that will prove earth circuit.

•

Use motor start/delayed fuses with characteristic D

according to IEC 947-2 or corresponding standards

outside IEC.

• If the supply cord is damaged, it must be replaced

by an authorized Nilsk distributor or similar qual-

ied person in order to avoid a hazard.

•

No actions needed for adjusting machines marked

with dual voltage and frequency.

• Supervise children not to play with the machine.

Original instructions 3

•

The operator and any one in the immediate vicinity

of the site for cleaning should take action to pro-

tect oneself from being struck by debris dislodged

during operation.

• Always wear safety boots, respiratory mask, ear

protection, goggles and protective clothing during

operation.

• The high pressure generated by the machine is a

particular source of danger. Hold the spray lance

rmly with both hands. The spray lance is aected

by a kickback force and a sudden torque during

operation.

• See PART 3:3 for the actual size of the kickback

force.

• During transportation: Position the machine hori-

zontally on the backside and secure with straps.

Within EU

•

High pressure washers shall not be used nor main-

tained by children. The machine can be used by

people with reduced physical, sensory or mental

capabilities or lack of experience and knowledge

if given supervision or instructions concerning use

of the machine in a safe way and understands the

hazards involved.

Outside EU

•

High pressure washers shall not be used nor main-

tained by children or untrained people or people with

reduced physical, sensory or mental capabilities

or lack of experience and knowledge.

Part 2:3 - User Guide

Provides a general overview of the machine and

operation elements along with illustrated sections on

preparation, operation, water connection, storage,

and user maintenance.

A Unpacking and preparing for use

Follow illustrations in A.

B Connection to potable water mains

High pressure washers are not suitable for con-

nection to the potable water mains. Always check

national regulations before connecting the machine

to potable water mains and use a back-ow preventer

if required.

• Use ½" garden hose, 10-25 m.

• Follow illustrations in B.

C Connection to other water sources

You can connect the machine to e.g. rain water ves-

sels, rivers, lakes and cisterns etc. and operate it in

suction mode. Follow illustrations in C.

D Pairing of spray handle and machine

C-PG and D-PG series only. After battery insert, D1.1,

you have 2 min. to pair spray handle and machine.

The light will ash orange when searching for the

machine. When paired, the light will turn o. Follow

illustrations D1.1 to D1.5. If pairing aborts, do pair-

ing according to illustrations D2.1 to D2.5. Power

regulation is indicated by green light, see illustration

D3.1 and D3.2.

Leaving the machine unattended > 5 min.

See listed warnings. Follow the illustrations in E.

F After use and storage

After use always: Turn o the machine. Empty ma-

chine and accessories of water to avoid frost damage.

Remove the plug from socket. Disconnect water inlet

hose. Wind up electrical cable and high pressure

hose to avoid damage of cable, high pressure hose

and ttings. Storage of machine shall be frost free.

• Follow illustrations in F.

G Maintenance, inspection and repair

Maintenance of the machine should always be done

when starting up after long time of storage.

Before use, always inspect the machine and

equipment for damages. In case of damages, act

according to listed warnings.

•

Do not attempt any maintenance not described

in the instructions. If the machine refuses to start,

stops, pulsates, pressure uctuates, motor buzzes,

fuse blows or no water comes out, check the trouble

shooting diagram at our website www.get-started.

nilsk.com. Any repair should always be made in

Nilsk authorized workshop with original Nilsk

spare parts.

• User maintenance according to illustrations in G.

Specyfikacje produktu

Marka:	Nilfisk
Kategoria:	Myjka wysokociśnieniowa
Model:	D 140.4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Nilfisk D 140.4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Myjka wysokociśnieniowa Nilfisk

Nilfisk C 110.3-5 PC X-TRA Instrukcja

15 Października 2024

Nilfisk C 125.7 Instrukcja

8 Października 2024

Nilfisk C 125.4-6 PCA Instrukcja

29 Września 2024

Nilfisk C 110.7 X-TRA Instrukcja

28 Września 2024

Nilfisk E 145.3 X-TRA Instrukcja

28 Września 2024

Nilfisk C 125.7-6 P X-TRA Instrukcja

27 Września 2024

Nilfisk MC 4 Instrukcja

26 Września 2024

Nilfisk MH 3 Instrukcja

26 Września 2024

Nilfisk MH 6 Instrukcja

26 Września 2024

Nilfisk MC 8 Instrukcja

26 Września 2024

Instrukcje Myjka wysokociśnieniowa

Najnowsze instrukcje dla Myjka wysokociśnieniowa

Sun Joe SPX3001-RM Instrukcja

14 Października 2024

Worx WG629.1 Instrukcja

13 Października 2024

PowerPlus POWXG9025 Instrukcja

10 Października 2024

Cecotec HidroBoost 1400 Instrukcja

9 Października 2024

Einhell RT-HP 1648 TR Instrukcja

9 Października 2024

Einhell RT-HP 1545 Instrukcja

9 Października 2024

Einhell HR 160 Instrukcja

9 Października 2024

Anova H1800 Instrukcja

8 Października 2024

Anova H1950 Instrukcja

8 Października 2024

Vonroc PW509AC Instrukcja

8 Października 2024