Instrukcja obsƂugi Nilfisk C 120.4 Hogedruk reiniger

Nilfisk Myjka wysokociƛnieniowa C 120.4 Hogedruk reiniger

Przeczytaj poniĆŒej 📖 instrukcję obsƂugi w języku polskim dla Nilfisk C 120.4 Hogedruk reiniger (18 stron) w kategorii Myjka wysokociƛnieniowa. Ta instrukcja byƂa pomocna dla 5 osĂłb i zostaƂa oceniona przez 2 uĆŒytkownikĂłw na ƛrednio 4.5 gwiazdek

Strona 1/18
NilïŹ sk C 120.4
User Manual
3
Index
1 Safety precautions and warnings .............................................3
2 Description ...............................................................................4
3 Before you start using your pressure washer ...........................5
4 Operating your pressure washer ..............................................6
5 Fields of Application and working methods ..............................9
6 After using your pressure washer ...........................................11
7 Maintenance ...........................................................................12
8 Trouble Shooting ....................................................................14
9 Further information .................................................................15
10 EC Declaration of Conformity .................................................17
1 Safety Precautions and Warnings
Symbols used to mark in-
structions
Before starting up
your high-pres-
sure washer for
the ïŹ rst time, this
instruction manual
must be read through carefully.
Save the instructions for later
use.
Safety instructions
marked with this
symbol must be
observed to pre-
vent danger to persons.
This symbol is
used to mark safety
instructions that
must be observed
to prevent damage
to the machine and its per-
formance.
This symbol
indicates tips
and instructions
to simplify work and to ensure a
safe operation.
Do not let children or people
who have not read the instruc-
tion manual ope rate the ma-
chine.
Before starting up your machine
please check it carefully for any
defects. If you ïŹ nd any, do not
start up your machine and con-
tact your NilïŹ sk distributor.
Especially check:
z The insulation of the electric
cable should be faultless
and without any cracks. If the
electric cable is damaged, an
authorized NilïŹ sk distributor
should replace it.
WARNING!
z High pressure jets can be
dangerous. Never direct the
water jet at persons, pets,
live electrical equipment or
the machine itself.
z Never try to clean clothes or
footwear on yourself or other
persons.
z Hold the spray lance ïŹ rmly
with both hands. The spray
lance is affected by a thrust
of up to 16.4 N during ope–
ration.
z The operator and anyone in
the immediate vicinity of the
site of cleaning should take
action to protect themselves
from being struck by debris
dislodged during operation.
Wear goggles during opera-
tion.
z Never use the machine in
an environment where there
could be a danger of explo-
sion. If any doubt arises,
please contact the local
authorities.
z It is not allowed to clean as-
bestos- containing surfaces
with high pressure.
z This high pressure washer
must not be used at tempera-
tures below 0°C.
z Never let any persons stay
under the product when
stored on the wall.
WARNING!
Inadequate extension cables
can be dangerous. Cables on
drums should always be com-
pletely unwinded to prevent the
cable from overheating.
,
4
Extension cables should be of
a watertight construction and
comply with the below-men-
tioned requirements for length
and cable dimensions.
1.0 mmÂČ max. 12.5 m
1.5 mmÂČ max. 20 m
2.5 mmÂČ max. 30 m
z Cable connections should be
kept dry and off the ground.
Mains power connection
The following should be ob-
served when connecting the
high pressure washer to the
electric installation:
z Only connect the machine to
an installation with earth con-
nection.
z The electric installation shall
be made by a certiïŹ ed elec-
trician.
z It is strongly recommended
that the electric supply to this
machine should include a re-
sidual current device (GFCI).
Water connection
Connection to
the public mains
according to regu-
lations.
This high pres-
sure washer is only allowed to
be connected with the drinking
water mains, when an appro-
priate backïŹ‚ ow preventer has
been installed, Type BA accord-
ing to EN 1717. The backïŹ‚ ow
preventer can be ordered under
number 106411177. The length
of the hose between the back-
ïŹ‚ ow preventer and the high
pressure washer must be at
least 10 metres to absorb pos-
sible pressure peaks (min diam-
eter œ inch).
Operation by suction (for ex-
ample from a rainwater vessel)
is carried out without backïŹ‚ ow
preventer. Recommended suc-
tion set: 126411387.
As soon as water has ïŹ‚ own
through the BA valve, this water
is not considered to be drinking
water any more.
IMPORTANT! Only use wa-
ter without any impurities. If
there is a risk of running sands
in the inlet water (i.e. from your
own well), an additional ïŹ lter
should be mounted.
Repair and maintenance
WARNING! Always remove the
electric plug from the socket be-
fore carrying out maintenance
work on the machine.
Safety devices
Locking device on spray gun
(7a) (see foldout at the end of
this manual):
The spray gun features a lock-
ing device. When the pawl is
activated, the spray gun cannot
be ope rated.
Thermal sensor:
A thermal sensor protects the
motor against overloading. The
machine will restart after a few
minutes when the thermal sen-
sor has cooled.
Pressure safety device
An integrated hydraulic safety
valve protects the system from
excessive pressure.
2 Description
2.1 Application This high-pressure washer has
been developed for domestic
use within:
- Car, motorbike, boat, cara-
van, trailer, patio/drive/ïŹ‚ ag-
stones, woodwork, brickwork,
barbecue, garden furniture,
lawn mower
Section 5 describes the use of
the high-pressure washer for
vaious cleaning jobs.
Only use the high-pressure
washer for purposes described
in this manual.
The safety precautions must be
observed to prevent damage
to the machine, the surface to
be cleaned or severe personal
injuries.


Specyfikacje produktu

Marka: Nilfisk
Kategoria: Myjka wysokociƛnieniowa
Model: C 120.4 Hogedruk reiniger

Potrzebujesz pomocy?

Jeƛli potrzebujesz pomocy z Nilfisk C 120.4 Hogedruk reiniger, zadaj pytanie poniĆŒej, a inni uĆŒytkownicy Ci odpowiedzą




Instrukcje Myjka wysokociƛnieniowa Nilfisk

Nilfisk

Nilfisk MH 7P Instrukcja

30 Grudnia 2025
Nilfisk

Nilfisk MC 4M Instrukcja

7 Grudnia 2024
Nilfisk

Nilfisk C 110.3-5 PC X-TRA Instrukcja

15 PaĆșdziernika 2024
Nilfisk

Nilfisk C 125.7 Instrukcja

8 PaĆșdziernika 2024
Nilfisk

Nilfisk C 125.4-6 PCA Instrukcja

29 Wrzeƛnia 2024
Nilfisk

Nilfisk C 110.7 X-TRA Instrukcja

28 Wrzeƛnia 2024
Nilfisk

Nilfisk E 145.3 X-TRA Instrukcja

28 Wrzeƛnia 2024
Nilfisk

Nilfisk MC 4 Instrukcja

26 Wrzeƛnia 2024
Nilfisk

Nilfisk MH 3 Instrukcja

26 Wrzeƛnia 2024

Instrukcje Myjka wysokociƛnieniowa

Najnowsze instrukcje dla Myjka wysokociƛnieniowa