Instrukcja obsługi Newland HR100

Newland czytnik kodów kreskowych HR100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Newland HR100 (136 stron) w kategorii czytnik kodów kreskowych. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/136

NLS-HR100 Series

Hand-held 1D Barcode Scanner

User Guide

Version Description Date

Pre-release Initial release 20090826

V1.0 Support as from HR100 rmware Version 1.21.21 and higher. 20100520ﬁ

V1.1 Revise the depth of eld on the basis of testing report and modify the ﬁ

con guration of function key.ﬁ20100817

V1.1.1 Change the NO.2 Keyboard Layout from Belgium to Japanese the NO.6 ，

from Austria and Germany to Turkey F,the NO.10 from Swiss toTurkey Q. 20101224

V1.1.2

Merge HR100 and HR100R user guide together, Correct the setting code of

"Disable ITF-6" and "Enable ITF-6, Do Not Transmit Check Digit", Correct

"Min Message Length" of ITF25, Code39, COOP25, Matrix 25, Codabar,

MSI, Code11

20110610

V1.1.3 Add an ASCII Table in “ ”

Appendix

. 20110823

V1.1.4 Revise the Factory Default List. 20111103

V1.1.5

Add the feature of programming timeout between decodes (same barcode) for

the Sensor mode. Change the Min Message Length of Interleaved 2 of 5 from

“ ” “ ”5 to 2 .

20131105

V1.1.6

Add the program Timeout between Decodes (Same Barcode) in Continuous

mode and Transmit UPC-E/UPC-A Preamble Character features. Change the

supported minimum lengths of Plessey and MSI-Plessey to 4.

20140221

V1.1.7 Add the Good Read LED On/Off feature 20140429

Revisions

Disclaimer

No part of this publication may be reproduced, transmitted, or used in any form or by any means, electrical or

mechanical, without prior written permission from Newland Auto-ID. The material in this manual is subject

to change without notice.

All software, including rmware, is provided strictly on an as is basis and is provided without further ﬁ“ ”

warranty. Newland Auto-ID grants to the user a non-transferable and non-exclusive license to use each

software or rmware program delivered hereunder (licensed program). Except as noted below, such license ﬁ

may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of

Newland Auto-ID. No right to copy a licensed program in whole or in part is granted except as permitted

under copyright law or as hereinafter expressly provided. The user agrees to maintain Newland Auto-ID s ’

copies it makes in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse

engineer any licensed program or product delivered to the user or any portion thereof.

Newland Auto-ID reserves the right to make changes and improvements to any software or product for

reliability, function, or design.

Newland Auto-ID does not assume any responsibility or liability arising out of, or in connection with, the

application or use of any product, circuit, or application described herein.

No license is granted, either expressly or implicitly, estoppels, or otherwise under any Newland Auto-ID

intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained

in Newland Auto-ID products.

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation. All other

product or service names are the property of their respective owners.

Newland Auto-ID Tech. Co., Ltd.

Specyfikacje produktu

Marka:	Newland
Kategoria:	czytnik kodów kreskowych
Model:	HR100
Kolor produktu:	Biały
Waga produktu:	200 g
Certyfikaty:	FCC Part15 Class B, CE EMC Class B
Zakres temperatur (eksploatacja):	-20 - 60 °C
Zakres wilgotności względnej:	5 - 95 %
Napięcie:	5 V
Zakres temperatur (przechowywanie):	-40 - 85 °C
Wymiary produktu (SxGxW):	71 x 95 x 156 mm
Standardowe interfejsy:	USB
Typ przetwornika obrazu:	CCD
Standardy dekodowania:	Code128\nEAN-13\nEAN-8\nCode39\nUPC-A\nUPC-E\nGS1 Databar\nCodabar\nChina post 25\nInterleaved 2/5\nISBN/ISSN\nCode 93 etc.
Źródło światła:	630nm
Odczyt pod kątem nachylenia:	-30 - 30 °
Kąt odchylenia odczytu:	-45 - 45 °
Regulowany kąt odczytu:	-45 - 45 °
Prędkość skanowania:	300 s/str.