Instrukcja obsługi Newland EM1300

Newland czytnik kodów kreskowych EM1300

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Newland EM1300 (139 stron) w kategorii czytnik kodów kreskowych. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/139

NLS-EM1300 Series

Embedded 1D Barcode Scanning Engine

Integration Guide

Version Description Date

Pre-release Initial release. 20090826

V 1.0 Support as from EM1300 rmware Version 1.13.7 and higher. 20100520ﬁ

V 1.1 Revise the depth of eld on the basis of testing report. 20100817ﬁ

V 1.2 Revise the pictures of Dimensions. 20100902

V 1.2.1

Revise the pictures of Dimensions, Correct the setting code of "Disable

ITF-6" and "Enable ITF-6, Do Not Transmit Check Digit",Correct "Min

Message Length" of ITF25, Code39, COOP25, Matrix 25, Codabar,

MSI and Code11.

20110610

V 1.2.2 Add an "ASCII Table" in

Appendix

. 20110823

V 1.2.3 Correct the table of "Interface Socket Pin Assignment and De nition ﬁ”

Chapter Mechanical Interface

.20110914

V 1.2.4 Revise the Factory Default List. 20111103

V 1.3

Add the Enable/Disable All Symbologies, Auto Sleep in Hand-held

Mode, Timeout between Decodes (Same Barcode) in Continuous Mode

Features. Change the supported minimum lengths of Plessey and MSI-

Plessey to 4; change that of Interleaved 2 of 5 to 2.

20131128

V 1.3.1 Add the feature of programming timeout between decodes (same bar-

code) for Continuous mode. 20140221

V 1.3.2 Add the Transmit UPC-E/UPC-A Preamble Character features. Change

the supported minimum length of Code 39 to 1. 20140521

Revisions

Disclaimer

No part of this publication may be reproduced, transmitted, or used in any form or by any means, electrical or

mechanical, without prior written permission from Newland Auto-ID. The material in this manual is subject

to change without notice.

All software, including rmware, is provided strictly on an as is basis and is provided without further ﬁ“ ”

warranty. Newland Auto-ID grants to the user a non-transferable and non-exclusive license to use each

software or rmware program delivered hereunder (licensed program). Except as noted below, such license ﬁ

may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of

Newland Auto-ID. No right to copy a licensed program in whole or in part is granted except as permitted

under copyright law or as hereinafter expressly provided. The user agrees to maintain Newland Auto-ID s ’

copies it makes in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse

engineer any licensed program or product delivered to the user or any portion thereof.

Newland Auto-ID reserves the right to make changes and improvements to any software or product for

reliability, function, or design.

Newland Auto-ID does not assume any responsibility or liability arising out of, or in connection with, the

application or use of any product, circuit, or application described herein.

No license is granted, either expressly or implicitly, estoppels, or otherwise under any Newland Auto-ID

intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained

in Newland Auto-ID products.

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation. All other

product or service names are the property of their respective owners.

Newland Auto-ID Tech. Co., Ltd.

Specyfikacje produktu

Marka:	Newland
Kategoria:	czytnik kodów kreskowych
Model:	EM1300
Kolor produktu:	Czarny
Waga produktu:	6 g
Certyfikaty:	FCC Part15 Class B, CE EMC Class B
Zakres temperatur (eksploatacja):	-5 - 45 °C
Zakres wilgotności względnej:	5 - 95 %
Napięcie:	3.3 V
Zakres temperatur (przechowywanie):	-40 - 60 °C
Wymiary produktu (SxGxW):	28 x 22.7 x 9.5 mm
Standardowe interfejsy:	RS-232
Typ przetwornika obrazu:	CCD
Standardy dekodowania:	Code128\nEAN-13\nEAN-8\nCode39\nUPC-A\nUPC-E\nGS1 Databar\nCodabar\nChina post 25\nInterleaved 2/5\nISBN/ISSN\nCode 93 etc.
Źródło światła:	622 nm - 628 nm
Odczyt pod kątem nachylenia:	-60 - 60 °
Kąt odchylenia odczytu:	-45 - 45 °
Regulowany kąt odczytu:	-20 - 20 °
Prędkość skanowania:	300 s/str.