Instrukcja obsługi Netgear XAV5201
Netgear
Powerline adapter
XAV5201
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Netgear XAV5201 (2 stron) w kategorii Powerline adapter. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
Installation Guide
This symbol was placed in accordance with the European Union Directive
2002/96 on the Waste Electrical and Electronic Equipment (the WEEE
Directive). If disposed of within the European Union, this product should be
treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or
registered trademarks of NETGEAR, Inc. in the United States and/or other countries.
Information is subject to change without notice.Other brand and product names are
trademarks or registered trademarks of their respective holders. ©2012 by NETGEAR, Inc.
All rights reserved.
May 2012
Item Description
Power
LED
• . The electrical power is on.Solid green
• The adapter is in power saving Solid amber.
mode.
•Blinking green. The adapter is in the process of
setting up security.
•Off. There is no electrical power.
Power-
line LED
• . The adapter is connected to a Powerline Solid
network.
• . The adapter has not found any other Off
compatible Powerline devices using the same
encryption key.
The feature lets you pick the electri-Pick A Plug
cal outlet with the strongest link rate, indicated by
the color displayed by the LED:
Green: Link
rate > 80
Mbps (Best)
Amber: Link rate
> 50 and < 80
Mbps (Better)
Red: Link
rate < 50
Mbps(Good)
Powerline LED
Power LED
Ethernet LED
Reset
Security Ethernet port
Factory
button
Power LED is off Make sure that power is supplied to the electrical
outlet, and that the Powerline devices are not plugged
into an extension cord, power strip, or surge protector.
Power LED is
amber
Power saving mode occurs when the Ethernet LED is
off. This can occur when:
• The Ethernet cable is unplugged.
• The device connected through the Ethernet cable is
turned off.
• The adapter is idle for 10 minutes.
It returns to normal mode within 2 seconds once the
Ethernet link is up.
Powerline LED
is off
• If you have set network security, make sure that all
Power line devices are using the same encryption
key; see the online for details.
• Press the button on each device for 1 second Reset
to return the Powerline adapter to its factory default
settings.
Powerline LED
is amber or red
Move the Powerline device to a closer location.
Ethernet LED is
off
• Make sure that the Ethernet cables are working and
securely plugged into the devices.
• Press the button on each device for 1 second Reset
to return the Powerline adapter to its factory default
settings.
Warning: Do not press the button on the Powerline Security
adapter until installation is complete and the adapters are
communicating with each other (indicated by the blinking
Powerline LED). Pressing this button too soon can temporarily
disable Powerline communication. If this should occur, use the
Factory Reset button to return the Powerline adapter to its
factory default settings.
Ethernet
LED
• . The Ethernet port is linked.Solid
• . There is no Ethernet connection.Off
Security
button
After you plug in your new AV adapter, press the
Security button for 2 seconds, then press the
security button on one of the other AV adapters in
your existing network for 2 seconds. Both buttons
must be pressed within 2 minutes.
Note Security: The button does not work in power
saving mode (see “Power LED is amber” in the
Troubleshooting Tips table).
Factory
Reset
Press the Reset button for 1 second, then release
it to return the Powerline adapter to its factory
default settings.
Item Description
Powerline 500
Nano Adapters
Ethernet cables In some regions,
a Resource CD is
included with your
product.
Compatible Powerline and HomePlug AV certified devices include the NETGEAR XAV101,
XAV1004, XAV2001, XAV2501, and XAVN2001. For a complete list of AV certified devices,
go to http://www.homeplug.org/certified_products
•AC input: 100-240V~, 0.2A (Max).
•Operating temperature: 0C~40C.
•The socket-outlet must be installed near the equipment and
must be easily accessible.
•For indoor use only in EU countries and Switzerland.
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label
of your product and use it to register your product at
http://www.NETGEAR.com/register. Registration is required
before you can use our telephone support service. Registration
via our website is strongly recommended.
To access the XAV5201 Powerline utility, go to
http://support.netgear.com, enter your Powerline model number,
and click the Powerline utility link.
To register your product, get the latest product updates, or get
support online, visit us at . http://support.netgear.com
Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries):
See .http://support.netgear.com/app/answers/detail/a_id/984
GPL may be included with this product; go to
ftp://downloads.netgear.com/files/GPLnotice.pdf to view the GPL
license agreement.
For complete DoC, visit the NETGEAR EU Declarations of
Conformity website at:
http://support.netgear.com/app/answers/detail/a_id/11621.
Specyfikacje produktu
Marka: | Netgear |
Kategoria: | Powerline adapter |
Model: | XAV5201 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Netgear XAV5201, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Powerline adapter Netgear
6 Września 2024
5 Września 2024
23 Sierpnia 2024
21 Sierpnia 2024
20 Sierpnia 2024
20 Sierpnia 2024
16 Sierpnia 2024
15 Sierpnia 2024
13 Sierpnia 2024
9 Sierpnia 2024
Instrukcje Powerline adapter
- Powerline adapter TP-Link
- Powerline adapter StarTech.com
- Powerline adapter Nedis
- Powerline adapter TRENDnet
- Powerline adapter D-Link
- Powerline adapter Manhattan
- Powerline adapter Strong
- Powerline adapter ZyXEL
- Powerline adapter AVM
- Powerline adapter Devolo
- Powerline adapter Edimax
- Powerline adapter LevelOne
- Powerline adapter Eminent
- Powerline adapter Sitecom
Najnowsze instrukcje dla Powerline adapter
19 Września 2024
17 Września 2024
14 Września 2024
13 Września 2024
8 Września 2024
3 Września 2024
31 Sierpnia 2024
31 Sierpnia 2024
25 Sierpnia 2024
23 Sierpnia 2024