Instrukcja obsługi Netgear XAV1004
Netgear
adapter sieciowy
XAV1004
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Netgear XAV1004 (34 stron) w kategorii adapter sieciowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/34
202-10470-01
v1.1
September 2009
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
XAV1004 Powerline AV
Ethernet Adapter User
Guide
ii
v1.1, September 2009
© 2009 by NETGEAR, Inc. All rights reserved.
Technical Support
Please refer to the support information card that shipped with your product. By registering your product at http://
www.netgear.com/register, we can provide you with faster expert technical support and timely notices of product and
software upgrades.
NETGEAR, INC. Support Information
Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.
E-mail: support@netgear.com
North American NETGEAR website: http://www.netgear.com
Trademarks
NETGEAR, the NETGEAR logo, ProSafe, Smart Wizard, and Auto Uplink are trademarks or registered trademarks of
NETGEAR, Inc. Microsoft, Windows, Windows NT and Vista are registered trademarks of Microsoft
Corporation.Other brand and product names are registered trademarks or trademarks of their respective holders.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Safety Instructions
Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential
damage.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the following
precautions.
• Observe and follow service markings.
- Do not service any product except as explained in your system documentation.
- Opening or removing covers that are marked with the triangular symbol with a lightning bolt may expose you to
electrical shock. Only a trained service technician should service components inside these compartments.
• If any of the following conditions occur, unplug the product from the electrical outlet and replace the part or contact
your trained service provider:
- The power cable, extension cable, or plug is damaged.
- An object has fallen into the product.
- The product has been exposed to water.
- The product has been dropped or damaged.
- The product does not operate correctly when you follow the operating instructions.
• Keep your system away from radiators and heat sources. Also, do not block cooling vents.
• Do not spill food or liquids on your system components, and never operate the product in a wet environment. If the
system gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider.
v1.1, September 2009
iii
• Do not push any objects into the openings of your system. Doing so can cause fire or electric shock by shorting out
interior components.
• Use the product only with approved equipment.
• Allow the product to cool before removing covers or touching internal components.
• Operate the product only from the type of external power source indicated on the electrical ratings label. If you are
not sure of the type of power source required, consult your service provider or local power company.
• To help avoid damaging your system, be sure that the voltage selection switch (if provided) on the power supply is
set to match the power available at your location:
- 115 volts (V), 60 hertz (Hz) in most of North and South America and some Far Eastern countries such as South
Korea and Taiwan
- 100 V, 50 Hz in eastern Japan and 100 V, 60 Hz in western Japan
- 230 V, 50 Hz in most of Europe, the Middle East, and the Far East
• Also, be sure that attached devices are electrically rated to operate with the power available in your location.
• Use only approved power cables. If you have not been provided with a power cable for your system or for any AC
powered option intended for your system, purchase a power cable that is approved for use in your country. The
power cable must be rated for the product and for the voltage and current marked on the product’s electrical ratings
label. The voltage and current rating of the cable should be greater than the ratings marked on the product.
• To help prevent electric shock, plug the system and peripheral power cables into properly grounded electrical
outlets.
• Observe extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged into
the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or
power strip.
• Position system cables and power cables carefully; route cables so that they cannot be stepped on or tripped over. Be
sure that nothing rests on any cables.
• Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications.
• Always follow your local and national wiring rules.
• Move products with care; ensure that all casters and stabilizers are firmly connected to the system. Avoid sudden
stops and uneven surfaces.
Safety and Regulatory Notices
FCC Statement
The XAV1004 has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
Specyfikacje produktu
| Marka: | Netgear |
| Kategoria: | adapter sieciowy |
| Model: | XAV1004 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Netgear XAV1004, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje adapter sieciowy Netgear
12 Stycznia 2025
16 Września 2024
14 Września 2024
12 Września 2024
7 Września 2024
6 Września 2024
6 Września 2024
5 Września 2024
5 Września 2024
5 Września 2024
Instrukcje adapter sieciowy
- adapter sieciowy TP-Link
- adapter sieciowy SilverCrest
- adapter sieciowy StarTech.com
- adapter sieciowy Asus
- adapter sieciowy Nedis
- adapter sieciowy Medion
- adapter sieciowy TRENDnet
- adapter sieciowy D-Link
- adapter sieciowy Manhattan
- adapter sieciowy Strong
- adapter sieciowy Mikrotik
- adapter sieciowy Cisco
- adapter sieciowy ZyXEL
- adapter sieciowy Sabrent
- adapter sieciowy Renkforce
- adapter sieciowy AVM
- adapter sieciowy Totolink
- adapter sieciowy Devolo
- adapter sieciowy Mercusys
- adapter sieciowy I-TEC
- adapter sieciowy Edimax
- adapter sieciowy Maginon
- adapter sieciowy Planet
- adapter sieciowy LevelOne
- adapter sieciowy Hama
- adapter sieciowy Western Digital
- adapter sieciowy Allnet
- adapter sieciowy Hirschmann
- adapter sieciowy Eminent
- adapter sieciowy Sitecom
- adapter sieciowy DeLock
- adapter sieciowy ICIDU
- adapter sieciowy Konig
- adapter sieciowy NPG
- adapter sieciowy Tiptel
- adapter sieciowy Eero
- adapter sieciowy Readynet
- adapter sieciowy Hamlet
- adapter sieciowy TELE System
- adapter sieciowy GBS Elettronica
- adapter sieciowy NetComm
- adapter sieciowy Comtrend
Najnowsze instrukcje dla adapter sieciowy
14 Stycznia 2025
13 Stycznia 2025
30 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025
29 Grudnia 2024
23 Grudnia 2024
23 Grudnia 2024
19 Grudnia 2024
19 Grudnia 2024