Instrukcja obsługi Netgear GS728TXPv3

Netgear Niesklasyfikowane GS728TXPv3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Netgear GS728TXPv3 (12 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

M4500 Intelligent Fully Managed Switches

Model M4500-32C

Model M4500-48XF8C

September 2019

202-12040-02

NETGEAR, Inc.

NETGEAR, Inc. NETGEAR, Inc.

350 E. Plumeria Drive

San Jose, CA 95134, USA

2 NETGEAR M4500 Series Switches Hardware Installation Guide

Support

Thank you for purchasing this NETGEAR product. You can visit

https://www.netgear.com/support/ to register your product, get help, access the latest

downloads and user manuals, and join our community. We recommend that you use only

official NETGEAR support resources.

Compliance and Conformity

For regulatory compliance information including the EU Declaration of Conformity, visit

https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Do not use this device outdoors. If you connect cables or devices that are outdoors to this

device, see for safety and warranty information.

http://kb.netgear.com/000057103

Trademarks

non-NETGEAR trademarks are used for reference purposes only.

Revision History

Publication Part

Number

Publish Date

Comments

202 12040- -02

September 2019

We made minor changes to the information

about the console cables.

202 12040 01- -

September 2019

First publication.

SAFETY INSTRUCTIONS AND WARNINGS

3 NETGEAR M4500 Series Switches Hardware Installation Guide

SAFETY INSTRUCTIONS AND WARNINGS

Use the following safety guidelines to ensure your own personal safety and to help protect

your system from potential damage.

To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,

observe the following precautions:

 This product is designed for indoor use only in a temperature-controlled and humidity-

controlled environment. For more information, see the environmental specifications in the

appendix or the data sheet.

Any device that is located outdoors and connected to this product must be properly

grounded and surge protected.

Failure to follow these guidelines can result in damage to your NETGEAR product, which

might not be covered by NETGEAR’s warranty, to the extent permissible by applicable

law.

 Observe and follow service markings:

 Do not service any product except as explained in your system documentation. Some

devices should never be opened.

 If applicable to your device, opening or removing covers that are marked with the

triangular symbol with a lightning bolt can expose you to electrical shock. We

recommend that only a trained technician services components inside these

compartments.

 If any of the following conditions occur, unplug the product from the electrical outlet and

replace the part or contact your trained service provider:

 Depending on your device, the power adapter, power adapter cable, power cable,

extension cable, or plug is damaged.

 An object fell into the product.

 The product was exposed to water.

 The product was dropped or damaged.

 The product does not operate correctly when you follow the operating instructions.

 Keep your system away from radiators and heat sources. Also, do not block cooling vents.

 Do not spill food or liquids on your system components, and never operate the product in

a wet environment. If the system gets wet, see the appropriate section in your

troubleshooting guide, or contact your trained service provider.

 Do not push any objects into the openings of your system. Doing so can cause fire or

electric shock by shorting out interior components.

 Use the product only with approved equipment.

 If applicable to your device, allow the product to cool before removing covers or touching

internal components.

 Operate the product only from the type of external power source indicated on the

electrical ratings label. If you are not sure of the type of power source required, consult

your service provider or local power company.

 To avoid damaging your system, if your device uses a power supply with a voltage

selector, be sure that the selector is set to match the power at your location:

 115V, 60 Hz in most of North and South America and some Far Eastern countries

such as South Korea and Taiwan

 100V, 50 Hz in eastern Japan and 100V, 60 Hz in western Japan

 230V, 50 Hz in most of Europe, the Middle East, and the Far East

Specyfikacje produktu

Marka:	Netgear
Kategoria:	Niesklasyfikowane
Model:	GS728TXPv3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Netgear GS728TXPv3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Netgear

Netgear FV318 Instrukcja

14 Października 2024

Netgear Nighthawk X6S R7960P Instrukcja

13 Października 2024

Netgear GS108Ev4 Instrukcja

9 Października 2024

Netgear Orbi RBE972SB Instrukcja

9 Października 2024

Netgear Orbi RBK652S Instrukcja

9 Października 2024

Netgear Nighthawk MS90 Instrukcja

9 Października 2024

Netgear Nighthawk MK93S Instrukcja

9 Października 2024

Netgear MS308 Instrukcja

9 Października 2024

Netgear Orbi RBEWM Instrukcja

9 Października 2024

Netgear Orbi RBKWMB Instrukcja

9 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024