Instrukcja obsługi NEC PlasmaSync 50XM3

NEC monitor PlasmaSync 50XM3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NEC PlasmaSync 50XM3 (62 stron) w kategorii monitor. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/62
NEC plasma display
External Control Manual
(for PX- -42XM2/PX 50XM3/PX-61XM2)
2
Application
These specifications are applicable to NEC plasma monitors and
communications control from external equipment.
"Please also support the command of VP series and refer to the manual of the
conventional model about specification."
Connections
Connections should be made as described below.
1) Connector on the plasma monitor side: EXTERNAL CONTROL connector.
Type of connector: D- -Sub 9 pin male
No.
Pin Name
1 No Connection
2 RXD (Receive data)
3 TXD (Transmit data)
4 DTR (DTE side ready)
5 GND
6 DSR (DCE side ready)
7 RTS (Ready to send)
8 CTS (Clear to send)
9 No Connection
plasma monitor
External equipment
e.g., Personal computer
3
2) Connector on the external equipment side: Serial port (RS-232C) connector.
See the specifications of the equipment that is to be connected for the type of
connector and the pin assignment.
3) Wiring
Use a crossed (reverse) cable.
Wire the cable so that each pair of data lines cross between the two devices.
These data line pairs are RXD (Receive data) and TXD (Transmit data), DTR
(DTE side ready) and DSR (DCE side ready), and RTS (Ready to send) and CTS
(Clear to send).
Communication Parameters
(1) Communication system Asynchronous
(2) Interface RS-232C
(3) Baud rate 9600 bps
(4) Data length 8 bits
(5) Parity Odd
(6) Stop bit 1 bit
(7) Communication code Hex


Specyfikacje produktu

Marka: NEC
Kategoria: monitor
Model: PlasmaSync 50XM3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z NEC PlasmaSync 50XM3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor NEC

Instrukcje monitor

Najnowsze instrukcje dla monitor