Instrukcja obsługi NEC MultiSync ME651

NEC monitor MultiSync ME651

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NEC MultiSync ME651 (5 stron) w kategorii monitor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
Quick Start Guide
AirServer® Embedded Screen Mirroring Solution
1. e Installing th MPi4 Kit AirServer
For installation and usage instructions of the MPi4 Kit AirServer, refer to the setup guide of the Raspberry Pi Compute Module 4.
https://assets.sharpnecdisplays.us/documents/installationguides/nec_raspberry_pi_compute_module4_setup_guide.pdf
2. Connections
Plug in an Ethernet cable to the LAN port of the MPi4 Kit AirServer.
NOTE recommend Ethernet: AirServer works using Wi-Fi or without network connectivity, but we for optimal performance.
3. Turn on the NEC display and select the correct source
Once the display is turned on select the source COMPUTE MODULE on the remote control. There the AirServer Quick Setup screen will ,
be displayed.
4. AirServer Quick Setup
To start the configuration, follow the on-screen instructions.
If the AirServer Raspberry Pi Compute Module 4 (MPi4 Kit AirServer) is connected to a network using an Ethernet cable, Quick Setup can
be done through a web browser on a computer or mobile device on the same network. Type in the IP address shown in the instructions and
at the bottom left of the homescreen. Once the Device Management page has loaded, type in the setup PIN to get started.
If the MPi4 Kit AirServer is not connected using an Ethernet cable, you must first connect a computer or a mobile device to the Guest Wi-Fi
shown in the Guest Access section on the on-screen menu. You can then type the IP address shown in the instructions into your browser
to start the Quick Setup.
The Quick Setup guides you through the basic settings for the MPi4 Kit AirServer:
Password protection for Device Management
Device/Room name
Homescreen layout
Country
Language
Time zone
Screen mirroring preferences
Once setup is completed, all settings can be accessed by selecting Advanced Settings. The on-screen display will no longer show the
Quick Setup instructions.
It is recommended to log into advanced settings and check for updates in the Updates section, as new firmware may be available.
5. Recommended Display Settings
5.1. Make AirServer your DEFAULT INPUT
1. Open the monitor OSD using the remote control and select
INPUT »
INPUT SETTINGS » CUSTOM DETECT
2. Set the INPUT PRIORITY as follows:
1. DisplayPort
2. HDMI1
3. COMPUTE MODULE
5.2. Enable QUICK START for AirServer running on the MPi4 Kit AirServer*
1. Open the monitor OSD using the remote control and select
PROTECT » POWER SAVE SETTINGS
2. Set QUICK START to ENABLE
*When Quick Start is enabled, the monitor will quickly return to the ON state when a signal is detected. Enabling
this option increases standby power consumption.
5.3. Enable CEC (Consumer Electronics Control)
This setting will automatically wake- -by mode once someone is trying to connect a device to AirServer. up the display from stand
1. Open the monitor OSD using the remote control and select
INPUT » INPUT-ADVANCED » CEC
2. Set CEC to MODE1
If you need help, you can find additional information on . www.airserver.com/support


Specyfikacje produktu

Marka: NEC
Kategoria: monitor
Model: MultiSync ME651

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z NEC MultiSync ME651, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor NEC

NEC

NEC E424 Instrukcja

14 Października 2024
NEC

NEC MD322C8-2 Instrukcja

11 Października 2024
NEC

NEC MultiSync LCD1850E Instrukcja

5 Października 2024
NEC

NEC MultiSync MD213MG Instrukcja

3 Października 2024
NEC

NEC MultiSync E244FL Instrukcja

2 Października 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

Acer

Acer VG281K Instrukcja

15 Stycznia 2025
Acer

Acer V223W Instrukcja

15 Stycznia 2025
Orion

Orion R4N55RNF Instrukcja

15 Stycznia 2025
Orion

Orion 23REDPH Instrukcja

15 Stycznia 2025
Orion

Orion R4N46UNF Instrukcja

15 Stycznia 2025
Orion

Orion 21REDPH Instrukcja

15 Stycznia 2025
BenQ

BenQ G2750HM Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM27JF-VDR Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HM24JF-VDR Instrukcja

14 Stycznia 2025