Instrukcja obsługi NEC MultiSync LT15OZ

NEC Projektor MultiSync LT15OZ

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NEC MultiSync LT15OZ (56 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/56
Micro-Portable Projector
LT150Z
Users Manual
English
Deutsch
Français
Italiano
Español
Svenska
E–2
IMPORTANT INFORMATION
Precautions
Please read this manual carefully before using your NEC
LT150Z Projector and keep the manual handy for fu-
ture reference.
Your serial number is located on the bottom of your
LT150Z. Record it here:
CAUTION
To turn off main power, be sure to remove
the plug from power outlet.
The power outlet socket should be installed
as near to the equipment as possible, and
should be easily accessible.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN
THE CABINET.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED NEC
SERVICE PERSONNEL.
This symbol warns the user that uninsulated
voltage within the unit may be sufficient to
cause electrical shock. Therefore, it is dan-
gerous to make any kind of contact with any
part inside of the unit.
This symbol alerts the user that important
information concerning the operation and
maintenance of this unit has been provided.
The information should be read carefully to
avoid problems.
WARNING
TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
DO NOT USE THIS UNIT’S GROUNDED PLUG
WITH AN EXTENSION CORD OR IN AN OUTLET
UNLESS ALL THREE PRONGS CAN BE FULLY
INSERTED.
DO NOT OPEN THE CABINET. THERE ARE HIGH-
VOLTAGE COMPONENTS INSIDE. ALL SERVIC-
ING MUST BE DONE BY QUALIFIED NEC SER-
VICE PERSONNEL.
DOC Compliance Notice
This Class B digital apparatus meets all requirements
of the Canadian Interference-Causing Equipment Regu-
lations.
3. GSGV Acoustic Noise Information Ordinance:
The sound pressure level is less than 70 dB (A) accord-
ing to ISO 3744 or ISO 7779.
RF Interference
WARNING
The Federal Communications Commission does not
allow any modifications or changes to the unit EX-
CEPT those specified by NEC Technologies in this
manual. Failure to comply with this government regu-
lation could void your right to operate this equipment.
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harm-
ful interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television re-
ception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected.
• Consult the dealer or an experienced radio / TV
technician for help.
In UK, a BS approved power cable with moulded plug
has a Black (five Amps) fuse installed for use with this
equipment. If a power cable is not supplied with this
equipment please contact your supplier.
IBM is a registered trademark of International Business Machines
Corporation.
Macintosh and PowerBook are registered trademarks of Apple Com-
puter, Inc.
Other product and company names mentioned in this user's manual
may be the trademarks of their respective holders.
C A U T I O N
This label is on the side of the remote control.
E–3
Important Safeguards
These safety instructions are to ensure the long life of
your projector and to prevent fire and shock. Please
read them carefully and heed all warnings.
Installation
1. For best results, use your projector in a darkened room.
2. Place the projector on a flat, level surface in a dry area
away from dust and moisture.
3. Do not place your projector in direct sunlight, near heaters
or heat radiating appliances.
4. Exposure to direct sunlight, smoke or steam can harm in-
ternal components.
5. Handle your projector carefully. Dropping or jarring can dam-
age internal components.
6. Do not place heavy objects on top of the projector.
7.
If you wish to have the projector installed on the ceiling:
a. Do not attempt to install the projector yourself.
b. The projector must be installed by qualified technicians
in order to ensure proper operation and reduce the risk
of bodily injury.
c. In addition, the ceiling must be strong enough to sup-
port the projector and the installation must be in accor-
dance with any local building codes.
d. Please consult your dealer for more information.
Power Supply
1. The projector is designed to operate on a power supply of
100-120 or 200-240 V 50/60 Hz AC. Ensure that your power
supply fits this requirement before attempting to use your
projector.
2. Handle the power cable carefully and avoid excessive bend-
ing. A damaged cord can cause electric shock or fire.
3. If the projector is not to be used for an extended period of
time, disconnect the plug from the power outlet.
CAUTION
Do not unplug the power cable from the wall outlet under any
one of the following circumstances. Doing so can cause damage
to the projector:
* While the Hour Glass icon appears.
* While the message "Please wait a moment." appears. This
message will be displayed after the projector is turned off.
* Immediately after the power cable is plugged into the wall
outlet (the POWER indicator has not changed to a steady or-
ange glow).
* Immediately after the cooling fan stops working (The cool-
ing fan continues to work for 90 seconds after the projector is
turned off with the POWER button).
* While the POWER and the STATUS indicators are alternately
flashing.


Specyfikacje produktu

Marka: NEC
Kategoria: Projektor
Model: MultiSync LT15OZ

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z NEC MultiSync LT15OZ, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Projektor NEC

NEC

NEC NC2043ML Instrukcja

12 Stycznia 2025
NEC

NEC NP-NC1503L Instrukcja

18 Grudnia 2024
NEC

NEC NP-M283X Instrukcja

14 Października 2024
NEC

NEC NP-M363X Instrukcja

10 Października 2024
NEC

NEC UM361X Instrukcja

5 Października 2024
NEC

NEC NP-PA1705UL Instrukcja

27 Września 2024
NEC

NEC PX1005QL Instrukcja

22 Września 2024
NEC

NEC PV710UL-W Instrukcja

20 Września 2024
NEC

NEC P547UL Instrukcja

18 Września 2024
NEC

NEC U321Hi Instrukcja

17 Września 2024

Instrukcje Projektor

Najnowsze instrukcje dla Projektor

Acer

Acer X1329 Instrukcja

15 Stycznia 2025
Acer

Acer P1165P Instrukcja

13 Stycznia 2025
Hitachi

Hitachi CP-X4011N Instrukcja

12 Stycznia 2025
Viewsonic

Viewsonic V149-4K Instrukcja

11 Stycznia 2025
Acer

Acer AX600 Instrukcja

9 Stycznia 2025
Acer

Acer Q59X Instrukcja

9 Stycznia 2025